1000 SERIES DIGIFLEX
LINK ELECTRONICS, INC.
NTSC/PAL COMPOSITE TO COMPONENT ANALOG
CONVERTER
DigiFlex 1163
MADE IN THE USA
FEATURES
Mounting Frame Options
‹ 3 Line Adaptive Digital Comb Filter
1000 - Single Power Supply, Holds 5 Modules
‹ 10 Bit or 12 Bit Processing
1000/2 - Dual Power Supply, Holds 5 Modules
‹ Analog Composite Input
7200 - Mounting Frame, Holds 1 Module
‹ YUV Outputs or RGB
‹ Composite Sync Output
The LINK 1163 analog composite to analog
component decoder provides an accurate means
of converting analog NTSC to component analog,
YUV or RGB. The 1163 utilizes high performance
hybrid output filters mounted on the rear cell to
detect and output RGB or YUV signals
A rear cell matches the 1163 for system flexibility.
The 1000 frame will accommodate digital, analog,
audio or video in the same frame. System upgrade
is made simple with the DigiFlex 1000 series
products.
The DigiFlex 1163 is designed to reside in LINK's
1000-Series frame. This frame can house up to 5
1163 modules due to power. For stand-alone
applications, the DigiFlex modules may be
mounted in a small portable chassis for single
module use, model 7200. The 7200-Series
"single-module frame" features a modular power
supply for insertion of any DigiFlex series front
and rear modules.
The input analog to YUV decoder features 2x over-
sampling. Decoding is handled by a state-of-the-
art three-line adaptive comb which eliminates the
"hanging dots" associated with traditional comb
filters. The 1163 utilizes 10 Bit processing. The
unit is available with 12 Bit option. Choose rear cell
1024 to provide YUV output and rear cell 1025 to
provide RGB output.
LINK
ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668
Phone 573 334 4433 FAX 573 334 9255
‹
|