AEG Washer L 70270 VFL User Manual

EN WASHING MACHINE  
USER MANUAL  
L 70270 VFL  
L 70470 FL  
 
ENGLISH  
3
FOR PERFECT RESULTS  
Thank you for choosing this AEG product. We have created it to give you  
impeccable performance for many years, with innovative technologies that help  
make life simpler – features you might not find on ordinary appliances. Please spend  
a few minutes reading to get the very best from it.  
ACCESSORIES AND CONSUMABLES  
In the AEG webshop, you’ll find everything you need to keep all your AEG  
appliances looking spotless and working perfectly. Along with a wide range of  
accessories designed and built to the high quality standards you would expect, from  
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…  
Visit the webshop at:  
CUSTOMER CARE AND SERVICE  
We recommend the use of original spare parts.  
When contacting Service, ensure that you have the following data available. The  
information can be found on the rating plate.  
Model  
PNC  
Serial Number  
 
4
SAFETY INFORMATION  
Before the installation and use, read this  
manual carefully:  
• For your safety and the safety of your  
property  
• To help the environment  
• For the correct operation of the appli-  
ance.  
Always keep these instructions with the  
appliance also if you move or give it to a  
different person.  
The manufacturer is not responsible if an  
incorrect installation and use causes dam-  
age.  
• Obey the safety instructions on the de-  
tergent packaging to prevent burns to  
eyes, mouth and throat.  
• Make sure that you remove all metal  
objects from the laundry. Hard and  
sharp material can cause damage to  
the appliance.  
• Do not touch the glass of the door  
while a programme operates. The glass  
can be hot (only for front-loading appli-  
ances).  
CARE AND CLEANING  
• Deactivate the appliance and discon-  
nect the mains plug from the mains  
socket.  
CHILDREN AND VULNERABLE  
PERSON SAFETY  
• Do not use the appliance without the  
filters. Make sure that the installation of  
the filters is correct. An incorrect instal-  
lation causes water leakages.  
• Do not let persons, children included,  
with reduced physical sensory, reduced  
mental functions or lack of experience  
and knowledge use the appliance. They  
must have supervision or instruction for  
the operation of the appliance by a per-  
son who is responsible for their safety.  
Do not let children play with the appli-  
ance.  
INSTALLATION  
• The appliance is heavy, be careful when  
you move it.  
• Do not transport your appliance with-  
out the transit bolts, you can damage  
internal components and cause leak-  
ages or malfunctions.  
• Do not install and connect a damaged  
appliance.  
• Make sure to remove all packaging and  
transport bolts.  
• Make sure that the mains plug is dis-  
connected from the mains socket dur-  
ing installation.  
• Keep all packaging away from children.  
There is the risk of suffocation or injury.  
• Keep all detergents away from children.  
• Keep children and pets away from the  
appliance when the door is open.  
• Before you close the appliance door,  
make sure that children and pets are  
not into the drum.  
• If the appliance has a child safety de-  
vice, we recommend to activate it.  
• Only a qualified person must do the  
electrical installation, the plumbing and  
the installation of the appliance. This to  
prevent the risks of structural damage  
or injury.  
• Do not install or use the appliance  
where the temperature is less than 0 °C.  
• When you install the appliance on a  
carpet floor, make sure that there is air  
circulation between the appliance and  
the carpet. Adjust the feet to have the  
necessary space between the appliance  
and the carpet.  
GENERAL SAFETY  
• Do not use the appliance for professio-  
nal use. The appliance is only for do-  
mestic use.  
• Do not change the specifications of this  
appliance. There is the risk of injury and  
damage to the appliance.  
• Do not put flammable products or  
items that are wet with flammable  
products in, near or on the appliance.  
Risk of explosion or fire.  
 
ENGLISH  
5
• Do not replace or change the mains ca-  
ble. Contact the service centre.  
• Make sure not to cause damage to the  
mains plug and cable.  
• Connect the mains plug to the mains  
socket only at the end of the installa-  
tion. Make sure that there is access to  
the mains plug after the installation.  
• Do not pull the mains cable to discon-  
nect the appliance. Always pull the  
mains plug.  
Water connection  
• Do not connect the appliance with old  
hoses already used. Only use new ho-  
ses.  
• Make sure not to cause damage to the  
water hoses.  
• Do not connect the appliance to new  
pipes or pipes not used for a long time.  
Let the water flow for some minutes,  
then connect the inlet hose.  
• The first time you use the appliance,  
make sure that the water hoses and the  
couplings do not have leakages.  
DISCARD THE APPLIANCE  
1.  
Disconnect the mains plug from the  
mains socket.  
Electrical connection  
2.  
3.  
Cut off the mains cable and discard it.  
• Make sure that the appliance is earth-  
ed.  
• Make sure that the electrical informa-  
tion on the rating plate agrees with the  
power supply.  
Discard the door catch. This prevents  
children or pets to be closed in the  
appliance. There is a risk of suffoca-  
tion (only for front-loading applian-  
ces).  
• Always use a correctly installed shock-  
proof socket.  
• Do not use multiple plugs and exten-  
sion cables. There is a risk of fire.  
TECHNICAL INFORMATION  
Dimensions  
Width / Height / Depth  
Total depth  
600 / 850 / 522 mm  
540 mm  
Electrical connection:  
Voltage  
230 V  
2200 W  
10 A  
Overall power  
Fuse  
Frequency  
50 Hz  
Level of protection against ingress of solid particles  
and moisture ensured by the protective cover, except  
where the low voltage equipment has no protection  
against moisture  
IPX4  
Water supply pressure  
Minimum  
Maximum  
0,5 bar (0,05 MPa)  
8 bar (0,8 MPa)  
Cold water  
1)  
Water supply  
Maximum load  
Spin speed  
Cotton  
7 kg  
Maximum  
1200 rpm (L 70270 VFL)  
1400 rpm (L 70470 FL)  
1)  
Connect the water inlet hose to a water tap with a 3/4'' thread.  
 
6
PRODUCT DESCRIPTION  
1
2
3
8
9
10  
4
5
11  
12  
6
7
Worktop  
Feet for the appliance level  
Water drain hose  
Water inlet valve  
1
2
3
4
5
6
7
8
Detergent dispenser  
Control panel  
Door handle  
9
Mains cable  
10  
11  
12  
Rating plate  
Transit bolts  
Drain pump  
Feet for the appliance level  
ACCESSORIES  
Spanner  
1
1
2
To remove the transit bolts.  
Plastic caps  
2
To close the holes on the rear side of  
the cabinet after the removal of the  
transit bolts.  
Anti-flood inlet hose  
To prevent possible leakage  
Plastic hose guide  
3
4
4
3
To connect the drain hose on the  
edge of a sink.  
 
ENGLISH  
7
CONTROL PANEL  
1
2
3
10  
9
8
7
6
5
4
On/Off button  
1
Programme knob  
Display  
2
3
Start Pause button  
4
5
6
Delay start button  
Time save button  
Extra rinse button  
Stain button  
7
8
Spin reduction button  
Temperature button  
9
10  
– Set again the washing programme  
and all possible options.  
• After 5 minutes from the end of the  
washing programme. Refer to 'At the  
end of programme'.  
1
ON OFF BUTTON  
Press this button to activate or deactivate  
the appliance. A tune sounds when the  
appliance is activated.  
The AUTO Stand-by function automatical-  
ly deactivates the appliance to decrease  
the energy consumption when:  
2
PROGRAMME KNOB  
• You do not use the appliance for 5 mi-  
Turn this knob to set a programme. The  
related programme indicator comes on.  
4
nutes before you press button  
.
– All settings are cancelled.  
1
Press button  
ance again.  
to activate the appli-  
 
8
3
DISPLAY  
A
B
C
D
The display shows:  
A
B
• The maximum temperature of the programme.  
• The default spin speed of the programme.  
1)  
'No Spin' and 'Rinse Hold' symbols.  
2)  
C
The display symbols.  
Symbols  
Description  
Washing phase  
Rinse phases  
Spin phase  
Child lock  
You cannot open the appliance door when the symbol is on.  
You cannot open the appliance door when the symbol flash-  
es. Wait for some minutes before you open the door.  
You can open the door only when the symbol goes off.  
If the programme is completed but the symbol stays on:  
• There is water in the drum.  
• The 'Rinse Hold' function is on.  
Delay start  
 
ENGLISH  
9
D
• The programme time  
When the programme starts, the time decreases with steps of 1 minute.  
• The delay start  
When you press the delay start button, the display shows the delay start  
time.  
• Alarm codes  
If the appliance has a malfunction, the display shows alarm codes. Refer  
to 'Troubleshooting' chapter.  
• Err  
The display shows this message for some seconds if:  
– You set a function that is not applicable for the programme.  
– You change the programme while it operates.  
4
The indicator of the Start/Pause button  
flashes.  
When the programme is completed.  
1)  
Only available for Spin/Drain programme.  
2)  
The symbols appear on the display when the related phase or function is set.  
4
8
START/PAUSE BUTTON  
STAIN BUTTON  
4
8
Press button  
programme.  
to start or interrupt a  
Press button  
a programme.  
to add the stain phase to  
Use this function for laundry with hard  
stains to remove.  
When you set this function, put the stain  
5
DELAY START BUTTON  
remover into compartment  
.
5
Press button  
to delay the start of a  
programme from 30 minutes to 20 hours.  
This function increases the pro-  
gramme duration.  
This function is not available with  
a temperature lower than 40° C.  
6
TIME SAVE BUTTON  
6
Press the button  
gramme duration.  
to decrease the pro-  
9
SPIN BUTTON  
• Press one time to set 'Shortened dura-  
tion' for items with daily soil.  
Press this button to:  
• Decrease the maximum speed of the  
spin phase when you set a programme.  
• Press two times to set 'Extra Quick' for  
items with almost no soil.  
The display shows only the spin  
speeds available with the set pro-  
gramme.  
Some programmes accept only  
one of the two functions.  
• Deactivate the spin phase.  
7
EXTRA RINSE BUTTON  
• Activate the 'Rinse Hold' function. Set  
this function to prevent fabric creases.  
The appliance does not drain the water  
when the programme is completed.  
7
Press button  
to add rinsing phases to  
a programme.  
Use this function for persons allergic to  
detergents and in areas where the water  
is soft.  
Spin phase is off.  
'Rinse Hold' function is  
on.  
 
10  
• To deactivate the function press button  
10  
TEMPERATURE BUTTON  
6
5
and button  
at the same time un-  
10  
Press button  
temperature.  
to change the default  
7
til the indicator of button  
is off.  
- -  
= cold water  
ACOUSTIC SIGNALS  
FUNCTION  
You can hear the acoustic signals when:  
• You activate the appliance.  
• You deactivate the appliance.  
• You press the buttons.  
• The programme is completed.  
• The appliance has a malfunction.  
To deactivate/activate the acoustic sig-  
8
7
nals, press button  
and button  
at  
the same time for 6 seconds.  
If you deactivate the acoustic sig-  
nals, they continue operate only  
when you press the buttons and  
when a malfunction occurs.  
CHILD LOCK FUNCTION  
This function prevents children to play  
with the control panel.  
• To activate the function, press button  
10  
9
and button  
til the display shows the symbol  
• To deactivate the function, press but-  
10  
at the same time un-  
.
9
ton  
and button  
at the same time  
goes off.  
until the symbol  
You can activate the function:  
• Before you press the Start/Pause but-  
4
ton  
: the appliance cannot start.  
• After you press the Start/Pause button  
4
, all the buttons and the programme  
knob are deactivated.  
PERMANENT EXTRA RINSE  
FUNCTION  
With this function you can keep the extra  
rinse function permanently on when you  
set a new programme.  
• To activate the function press button  
6
5
and button  
at the same time un-  
7
til the indicator of button  
is on.  
 
ENGLISH  
11  
PROGRAMMES  
Programme  
Temperature  
Type of load  
Cycle  
Functions  
max. weight of load description  
White and coloured  
cotton with normal  
soil.  
Wash  
SPIN REDUCTION  
RINSE HOLD  
Rinses  
Cottons  
95° - Cold  
1)  
Long spin  
STAIN  
max. 7 kg  
EXTRA RINSE  
2)  
TIME SAVE  
White and coloured  
Prewash  
SPIN REDUCTION  
RINSE HOLD  
cotton with heavy soil. Wash  
Cottons + Pre-  
wash  
95° - Cold  
max. 7 kg  
Rinses  
Long spin  
EXTRA RINSE  
2)  
TIME SAVE  
1)  
White and coloured  
cotton with normal  
soil.  
Wash  
STAIN  
Rinses  
EXTRA RINSE  
TIME SAVE  
Extra Silent  
95° - Cold  
Stop with water in  
the drum  
2)  
max. 7 kg  
Synthetic or mixed  
Wash  
SPIN REDUCTION  
RINSE HOLD  
fabric items with nor- Rinses  
Synthetics  
60° - Cold  
1)  
mal level of soil.  
max. 3.5 kg  
Short spin  
STAIN  
EXTRA RINSE  
2)  
TIME SAVE  
Synthetic or mixed  
fabric items with  
heavy soil.  
Prewash  
Wash  
SPIN REDUCTION  
RINSE HOLD  
Synthetics + Pre-  
wash  
60° - Cold  
Rinses  
EXTRA RINSE  
2)  
max. 3.5 kg  
Short spin  
TIME SAVE  
Synthetic fabric items Wash  
SPIN REDUCTION  
RINSE HOLD  
with normal soil.  
max. 3.5 kg  
Rinses  
3)  
Easy Iron  
Short spin  
EXTRA RINSE  
60° - Cold  
2)  
TIME SAVE  
Delicate fabrics as  
Wash  
SPIN REDUCTION  
RINSE HOLD  
acrylics, viscose, poly- Rinses  
Delicates  
40° - Cold  
1)  
ester items with nor-  
mal soil.  
max. 3.5 kg  
Short spin  
STAIN  
EXTRA RINSE  
2)  
TIME SAVE  
Machine washable  
Wash  
SPIN REDUCTION  
RINSE HOLD  
wool. Hand washable Rinses  
Wool  
40° - Cold  
wool and delicate  
fabrics with «hand  
washing» care sym-  
bol.  
Short spin  
max. 2 kg  
All fabrics  
Drainage of the  
SPIN REDUCTION  
NO SPIN  
The maximum load of water  
4)  
Spin / Drain  
the laundry is related Spin phase at the  
to the type of laundry. maximum speed.  
 
12  
Programme  
Temperature  
Type of load  
Cycle  
Functions  
max. weight of load description  
All fabrics.  
One rinse with ad- SPIN REDUCTION  
ditive spin phase  
RINSE HOLD  
EXTRA RINSE  
Rinse  
5)  
Set this programme  
to wash curtains. It  
adds automatically  
the prewash phase to Short spin  
clean the dust from  
the curtains.  
Prewash  
Wash  
SPIN REDUCTION  
RINSE HOLD  
EXTRA RINSE  
Curtains  
40° - Cold  
Rinses  
Do not put the deter-  
gent into the prewash  
compartment.  
max. 2.5 kg  
All items in jeans. Jer- Wash  
SPIN REDUCTION  
RINSE HOLD  
sey made items with  
hi-tech materials.  
max. 7 kg  
Rinses  
Jeans  
60° - Cold  
Short spin  
EXTRA RINSE  
2)  
TIME SAVE  
Quick washing pro-  
gramme, to be used  
for lightly soiled  
white/fast coloured  
cottons and mixed  
fabrics.  
Wash  
SPIN REDUCTION  
RINSE HOLD  
EXTRA RINSE  
Rinses  
Quick Intensive  
60° - 40°  
Long spin  
max. 5 kg  
20 Min. - 3 kg  
40° - 30°  
Cotton and synthetic Wash  
items with light soil or Rinses  
SPIN REDUCTION  
worn only one time.  
Short spin  
6)  
Mixed fabrics (cotton Wash  
SPIN REDUCTION  
RINSE HOLD  
EXTRA RINSE  
SUPER ECO  
Cold  
and synthetic items).  
max. 3 kg  
Rinses  
Short spin  
White and fast col-  
oured cotton with  
normal soil.  
Wash  
SPIN REDUCTION  
RINSE HOLD  
STAIN  
ECO  
Economy  
60° - 40°  
STANDARD  
PROGRAMMES  
for the Energy  
Label consump-  
tion values.  
Rinses  
7)  
Long spin  
max. 7 kg  
EXTRA RINSE  
2)  
TIME SAVE  
1)  
The STAIN function is not available with a temperature lower than 40°C.  
2)  
if you press the button 6 two times (Extra Quick duration), we recommend that you  
decrease the quantity of the load. It is possible to load fully the appliance, however the  
washing results are reduced.  
3)  
4)  
The wash and spin phase is soft to prevent the creases of the laundry. The appliance adds  
some rinses.  
The default phase of the spin speed is related to cotton items. Set the spin speed. Make  
sure that it agrees with the laundry. To select the DRAIN programme only, set the function  
NO SPIN.  
 
ENGLISH  
13  
5)  
Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs  
delicate rinses and a short spin.  
6)  
7)  
Set this programme to decrease the time and the consumption of energy and water.  
Set this programme to have a good washing results and decrease the energy consumption.  
The time of the washing programme is extended. For cotton economy programmes you  
can set only the Extra Quick duration.  
CONSUMPTION VALUES  
1)  
Energy consumption  
Water consump-  
tion (litre)  
Programme  
2)  
2)  
(KWh)  
White Cottons 95 °C  
Cottons 60 °C  
Cottons 40 °C  
Synthetics 40 °C  
Delicates 40 °C  
Wool/ Handwash 30 °C  
1)  
2.30  
1.30  
0.80  
0.53  
0.57  
0.25  
66  
62  
62  
45  
53  
45  
Refer to the display for the programme time.  
2)  
The consumption information shown in this chart is indicative. It can vary depending on the  
quantity and the type of laundry, on the temperature of the water supply and on the  
ambient temperature.  
Standard programmes for the  
Energy Label consumption  
values  
The cotton 60 °C economy and cotton 40  
°C economy are the standard cotton pro-  
grammes for normally soiled cotton laun-  
dry. They are suitable to clean normally  
soiled cotton laundry and they are the  
most efficient programmes in terms of  
combined energy and water consumption  
for washing that type of cotton laundry.  
They agree with EN60456.  
The actual water temperature may  
differ from the declared cycle  
temperature.  
 
14  
BEFORE FIRST USE  
1.  
To activate the drain system, put 2 li-  
tre of water in the main wash com-  
partment of the detergent dispenser.  
Put a small quantity of detergent in  
the main wash compartment of the  
detergent dispenser. Set and start a  
programme for cotton at the highest  
temperature without laundry. This re-  
moves all possible dirt from the drum  
and the tub.  
2.  
USING THE APPLIANCE  
1.  
2.  
4.  
5.  
Open the water tap.  
Connect the mains plug to the mains  
socket.  
Put the laundry in the appliance.  
Use the correct quantity of detergent  
and additives.  
3.  
6.  
Set and start the correct programme  
for the type of laundry and soil.  
1
Press button  
ance.  
to activate the appli-  
LOADING THE LAUNDRY  
1.  
2.  
Open the appliance door.  
not to put too much laundry in the  
drum.  
Close the door.  
Put the laundry in the drum, one item  
at a time. Shake the items before you  
put them in the appliance. Make sure  
3.  
Make sure that no laundry stays between  
the seal and the door. There is a risk of  
water leakage or damage to the laundry.  
FILLING THE DETERGENT AND ADDITIVES  
 
ENGLISH  
15  
The detergent compartment for the prewash phase, the soak pro-  
gramme and for the stain function.  
Add the detergent for prewash, soak and stain remover before  
the start of the programme.  
The detergent compartment for the washing phase.  
If you use a liquid detergent, put it immediately before you start  
the programme.  
Liquid additives compartment (fabric conditioner, starch).  
Put the product in the compartment before you start the pro-  
gramme.  
This is the maximum level for the quantity of liquid additives.  
Flap for powder or liquid detergent  
Turn it (up or down) in the correct position to use powder or liquid  
detergent.  
Always obey the instructions that you find on the packaging of the deter-  
gent products.  
Check the position of the flap  
1.  
2.  
Pull out the detergent dispenser until  
it stops.  
Press the lever down to remove the  
dispenser.  
3.  
To use powder detergent, turn the  
flap up.  
 
16  
4.  
To use liquid detergent, turn the flap  
down.  
With the flap in the position  
DOWN:  
– Do not use gelatinous or thick  
liquid detergents.  
– Do not put more liquid deter-  
gent than the limit showed in  
the flap.  
– Do not set the prewash phase.  
– Do not set the delay start func-  
tion.  
5.  
6.  
Measure out the detergent and the  
fabric conditioner.  
Carefully close the detergent dis-  
penser. Make sure that the flap does  
not cause a blockage when you close  
the drawer.  
SETTING AND STARTING A PROGRAMME  
1.  
Turn the programme knob. The rela-  
ted programme indicator comes on.  
CANCEL A PROGRAMME  
1.  
1
Press button  
to cancel the pro-  
2.  
4
The indicator of button  
with red colour.  
flashes  
gramme and to deactivate the appli-  
ance.  
3.  
The display shows the default tem-  
perature and spin speed. To change  
the temperature and/or the spin  
speed, press the related buttons.  
2.  
1
Press button  
again to activate the  
appliance. Now, you can set a new  
washing programme.  
4.  
5.  
Set the available functions. The indi-  
cator of the set function comes on or  
the display shows the related symbol.  
The appliance does not drain the  
water.  
4
Press button  
to start the pro-  
CHANGE A FUNCTION  
4
gramme. The indicator of button  
is on.  
You can change only some functions be-  
fore they operate.  
The appliance adjust automat-  
ically the cycle time to the  
laundry you have put in the  
drum to have perfect washing  
results in the minimum neces-  
sary time. After approximately  
15 minutes from the start of  
the programme, the display  
shows the new time value.  
1.  
4
Press button  
es.  
. The indicator flash-  
2.  
Change the function set.  
SET THE DELAY START  
1.  
5
Press button  
again and again until  
the display shows the number of mi-  
nutes or hours. The related symbols  
comes on.  
INTERRUPT A PROGRAMME  
2.  
4
Press button  
, the appliance starts  
the countdown of the delay start.  
1.  
4
Press button  
es.  
. The indicator flash-  
When the countdown is completed,  
the programme starts automatically.  
2.  
4
Press button  
again. The washing  
programme continues.  
 
ENGLISH  
17  
2.  
3.  
Open the appliance door.  
Close the appliance door and press  
4
Before you press button  
to  
start the appliance, you can cancel  
or change the set of the delay  
start.  
4
button  
. The programme or the  
delay start continues.  
If the temperature and level of the  
water in the drum are too high,  
the door lock symbol stays on and  
you cannot open the door. To  
open the door do the steps that  
follow:  
CANCEL THE DELAY START  
1.  
2.  
3.  
4
Press button  
tor flashes.  
. The related indica-  
5
Press button  
again and again until  
the display shows 0’.  
1.  
2.  
3.  
Deactivate the appliance.  
Wait for some minutes.  
Make sure that no water is in  
the drum.  
4
Press button  
starts.  
. The programme  
OPEN THE DOOR  
If you deactivate the appliance, it  
is necessary to set the programme  
again.  
While a programme or the delay start op-  
erates, the appliance door is locked.  
To open the appliance door:  
1.  
4
Press button  
. The door lock sym-  
bol in the display goes off.  
AT THE END OF THE PROGRAMME  
• The appliance stops automatically.  
• The acoustic signals operate.  
– You must drain the water to open the  
door.  
To drain the water:  
In the display  
comes on.  
1.  
If necessary, decrease the spin speed.  
• The indicator of the Start/Pause button  
2.  
4
4
goes off.  
Press the Start/Pause button  
. The  
appliance drain the water and spin.  
• The door lock symbol goes off.  
3.  
4.  
When the programme is completed  
and the door lock symbol goes off,  
you can open the door  
1
Press button  
to deactivate the ap-  
pliance. After five minutes from the end  
of the programme, the energy saving  
function automatically deactivates the  
appliance.  
Deactivate the appliance.  
The appliance drain and spin au-  
tomatically after approximately 18  
hours.  
When you activate the appliance  
again, the display show the end of  
the last set programme. Turn the  
programme knob to set a new cy-  
cle.  
• Remove the laundry from the appli-  
ance. Make sure that the drum is emp-  
ty.  
• Keep the door ajar, to prevent mildew  
and odours.  
• Close the water tap.  
The washing programme is completed,  
but there is water in the drum:  
– The drum turns regularly to prevent the  
creases in the laundry.  
– The door stays locked.  
 
18  
HINTS AND TIPS  
THE LAUNDRY LOAD  
DETERGENTS AND ADDITIVES  
• Divide the laundry in: white, coloured,  
synthetics, delicates and wool.  
• Only use detergents and additives spe-  
cially made for washing machines.  
• Obey the washing instructions that are  
on the laundry care labels.  
• Do not mix different types of deter-  
gents.  
• Do not wash together white and col-  
oured items.  
• Some coloured items can discolour with  
the first wash. We recommend that you  
wash them separately for the first times.  
• To help the environment, do not use  
more than the correct quantity of deter-  
gent.  
• Obey the instructions that you find on  
the on packaging of these products.  
• Button up pillowcases, close zippers,  
hooks and poppers. Tie up belts.  
• Empty the pockets and unfold the  
items.  
• Use the correct products for the type  
and colour of the fabric, the pro-  
gramme temperature and the level of  
soil.  
• If you use liquid detergents, do not set  
the prewash phase.  
• If your appliance has not the detergent  
dispenser with the flap device, add the  
liquid detergents with a dosing ball.  
• Turn inside out multilayered fabrics,  
wool and items with painted illustra-  
tions.  
• Remove hard stains.  
• Wash with a special detergent heavy  
soil stains.  
• Be careful with the curtains. Remove  
the hooks or put the curtains in a wash-  
ing bag or pillowcase.  
• Do not wash in the appliance :  
– Laundry without hems or with cuts  
– Underwired bras.  
– Use a washing bag to wash small  
items.  
• A very small load can cause balance  
problems with the spin phase. If this oc-  
curs, adjust manually the items in the  
tub and start the spin phase again.  
WATER HARDNESS  
If the water hardness in your area is high  
or moderate, we recommend that you use  
a water softener for washing machines. In  
areas where the water hardness is soft it is  
not necessary to use a water softener.  
To know the water hardness in your area,  
contact your local water authority.  
Obey the instructions that you find on the  
packaging of the products.  
Equivalent scales measure the water hard-  
ness:  
• German degrees (°dH).  
• French degrees (°TH).  
STUBBORN STAINS  
• mmol/l (millimol for each litre - interna-  
tional unit for the hardness of water).  
• Clarke degrees.  
For some stains, water and detergent is  
not sufficient.  
We recommend that you remove these  
stains before you put the items in the ap-  
pliance.  
Special stain removers are available. Use  
the special stain remover that is applica-  
ble to the type of stain and fabric.  
Water hardness table  
Water hardness  
Level  
Type  
°dH  
°T.H.  
mmol/l  
Clarke  
1
soft  
0-7  
0-15  
0-1.5  
0-9  
 
ENGLISH  
19  
Water hardness  
Level  
Type  
°dH  
8-14  
°T.H.  
mmol/l  
1.6-2.5  
2.6-3.7  
>3.7  
Clarke  
10-16  
17-25  
>25  
2
3
4
medium  
hard  
16-25  
26-37  
> 37  
15-21  
> 21  
very hard  
 
20  
CARE AND CLEANING  
WARNING!  
CAUTION!  
Do not use alcohol, solvents or  
chemical products.  
Disconnect the appliance from the mains  
supply before you clean it.  
MAINTENANCE WASH  
With the low temperature programmes it  
is possible that some detergent stays in  
the drum. Make regularly a maintenance  
wash. To do this:  
• Empty the laundry from the drum.  
• Set the hottest cotton wash programme  
• Use a correct quantity of powder deter-  
gent with biological properties.  
After each wash, keep the door open for a  
while to prevent mould and to let un-  
pleasant smells go out.  
DESCALING  
The water we use contains limescale. If it  
becomes necessary, use a water softener  
to remove limescales.  
Use a special product made for washing  
machines. Obey the instructions that you  
find on the packaging of the manufactur-  
er.  
Do this separately from the laundry wash.  
EXTERNAL CLEANING  
Clean the appliance only with soap and  
warm water. Fully dry all the surfaces.  
DOOR SEAL  
Regularly examine the seal and remove all  
objects from the inner part.  
• Clean the drum with special product for  
stainless steel.  
• Start a short programme for cotton at  
the maximum temperature with a small  
quantity of detergent.  
DRUM  
Regularly examine the drum to prevent  
limescale and rust particles.  
Only use special products to remove rust  
particles from the drum.  
To do this:  
 
ENGLISH  
21  
DETERGENT DISPENSER  
To clean the dispenser:  
1.  
2.  
Press the lever.  
Pull the dispenser out.  
1
2
3.  
4.  
Remove the top part of the liquid ad-  
ditive compartment.  
Clean all the parts with water.  
5.  
6.  
Clean the dispenser recess with a  
brush.  
Put back the dispenser in the recess.  
WARNING!  
DRAIN PUMP  
1.  
Disconnect the mains plug  
from the mains socket.  
Regularly examine the drain pump  
and make sure that it is clean.  
2.  
Do not remove the filter while  
the appliance operates. Do  
not clean the drain pump if  
the water in the appliance is  
hot. The water must be cold  
before you clean the drain  
pump.  
Clean the pump if:  
• The appliance does not drain the water.  
• The drum cannot turn.  
• The appliance makes an unusual noise  
because of the blockage of the drain  
pump.  
• The display shows an alarm code be-  
cause of the problem with water drain.  
 
22  
To clean the drain pump:  
1.  
Open the drain pump door.  
2.  
3.  
4.  
Put a container below the recess of  
the drain pump to collect the water  
that flows out.  
Press the two levers and pull forward  
the drainage duct to let the water  
flow out.  
When the container is full of water,  
put the drainage duct back again and  
empty the container. Do steps 3 and  
4 again and again until no more wa-  
ter flows out from the drain pump.  
5.  
6.  
7.  
Pull back the drainage duct and turn  
the filter to remove it.  
2
1
Remove fluff and objects from the  
pump.  
Make sure that the impeller of the  
pump can turn. If this does not occur,  
contact the service centre.  
 
ENGLISH  
23  
8.  
9.  
Clean the filter under the water tap  
and put it back in the pump into the  
special guides.  
Make sure that you tighten correctly  
the filter to prevent leakages.  
1
2
10.  
Close the drain pump door.  
4
The indicator of button  
flashes and  
THE INLET HOSE FILTER AND  
THE VALVE FILTER  
the display shows the related alarm. Re-  
fer to 'Troubleshooting'.  
It could be necessary to clean the filters  
when:  
• The appliance does not fill with water.  
• The appliance fills with the water for a  
long time.  
WARNING!  
Disconnect the mains plug from  
the mains socket.  
To clean the water inlet filters:  
1.  
2.  
Close the water tap.  
Remove the water inlet hose from the  
water tap.  
3.  
Clean the filter in the inlet hose with a  
stiff brush.  
4.  
5.  
Remove the inlet hose behind the  
appliance.  
Clean the filter in the valve with a stiff  
brush or a towel.  
 
24  
6.  
7.  
Install again the inlet hose. Make sure  
that the couplings are tight to pre-  
vent leakages.  
Open the water tap.  
45°  
20°  
EMERGENCY DRAIN  
Because of a malfunction, the appliance  
cannot drain the water.  
If this occurs, do steps (1) through (6) of  
'To clean the drain pump'.  
If necessary, clean the pump.  
Put the drainage duct back and close the  
drain pump flap.  
When you drain the water with the emer-  
gency drain procedure, you must activate  
again the drain system:  
1.  
Put 2 litres of water in the main wash  
compartment of the detergent dis-  
penser.  
2.  
Start the programme to drain the wa-  
ter.  
FROST PRECAUTIONS  
If the appliance is installed in an area  
where the temperature can be less than 0  
°C, remove the remaining water from the  
inlet hose and the drain pump.  
1.  
Disconnect the mains plug from the  
mains socket.  
2.  
3.  
4.  
Close the water tap.  
Remove the water inlet hose  
Put the two ends of the inlet hose in a  
container and let the water flow out  
of the hose.  
5.  
6.  
Empty the drain pump. Refer to the  
emergency drain procedure  
When the drain pump is empty, install  
the inlet hose again.  
WARNING!  
Make sure that the temperature is  
more than 0 °C before you use the  
appliance again.  
The manufacturer is not responsi-  
ble for damages caused by low  
temperatures.  
 
ENGLISH  
25  
TROUBLESHOOTING  
The start of the appliance does not occur  
- The appliance does not drain  
or it stops during operation.  
First try to find a solution to the problem  
(refer to the table). If not, contact the serv-  
ice centre.  
the water.  
- The appliance door is open or  
not closed correctly.  
WARNING!  
Deactivate the appliance before  
you do the checks.  
With some problems, the acoustic  
signals operate and the display shows  
an alarm code:  
- The appliance does not fill with  
water.  
Problem  
Possible cause  
Possible solution  
The appliance  
does not fill with  
water.  
The water tap is closed.  
Open the water tap.  
The water inlet hose is  
damaged.  
Make sure that the water inlet  
hose has no damages.  
The filters in the water in- Clean the filters. Refer to 'Care  
let hose is blocked . and cleaning'.  
The water tap is blocked Clean the water tap.  
or is furred with lime-  
scale.  
The connection of the  
water inlet hose is not  
correct.  
Make sure that the connection is  
correct.  
The water pressure is too Contact your local water authori-  
low.  
ty.  
The appliance  
does not drain the damaged.  
water.  
The water drain hose is  
Make sure that the water drain  
hose has no damages.  
The filter of the drain  
pump is blocked.  
Clean the filter of the drain  
pump. Refer to 'Care and clean-  
ing'.  
The connection of the  
water drain hose is not  
correct.  
Make sure that the connection is  
correct.  
A washing programme  
without the drain phase  
is set.  
Set the drain programme.  
The function Rinse &  
Hold is on.  
Set the drain programme.  
Close the door correctly.  
The appliance  
door is open or  
not closed correct-  
ly.  
 
26  
Problem  
Possible cause  
Possible solution  
The spin phase  
does not operate.  
The spin phase is off.  
Set the spin programme.  
The filter of the drain  
pump is blocked.  
Clean the filter of the drain  
pump. Refer to 'Care and clean-  
ing'.  
Balance problems with  
the laundry load.  
Adjust manually the items in the  
tub and start the spin phase  
again.  
The programme  
does not start.  
The mains plug is not  
connected in the mains  
socket.  
Put in the mains plug.  
Blow out fuse in the  
household fuse box.  
Replace the fuse.  
You did not press button  
4
Press button  
.
4
.
The delay start is set.  
To start immediately the pro-  
gramme, cancel the delay start.  
The Child Lock function  
is activated.  
Deactivate the Child Lock func-  
tion.  
There is water on  
the floor.  
Leakages from the cou-  
plings of the water ho-  
ses.  
Make sure that the couplings are  
tight.  
Leakages from the drain Make sure that the drain pump  
pump.  
filter is tight.  
The water drain hose is  
damaged.  
Make sure that the water inlet  
hose has no damages.  
You cannot open  
the appliance  
door.  
The washing programme Let the washing programme end.  
is in operation.  
There is water in the  
drum.  
Set the drain or the spin pro-  
gramme.  
The appliance  
makes an unusual pliance.  
noise.  
Incorrect level of the ap- Adjust the level of the appliance.  
Refer to 'Installation'.  
You did not remove the  
packaging and/or the  
transit bolts.  
Remove the packaging and/or  
the transit bolts. Refer to 'Instal-  
lation'.  
The load is very small.  
Add more laundry in the drum.  
The appliance fills The end of the drain  
Make sure that the drain hose is  
in the correct position.  
with water and  
hose is too low.  
drain immediately.  
The washing re-  
The detergent you used Increase the detergent quantity  
sults are not satis- was not sufficient or cor- or use a different one.  
factory.  
rect.  
 
ENGLISH  
27  
Problem  
Possible cause  
Possible solution  
You did not remove the  
stubborn stains before  
you wash the laundry.  
Use special products to remove  
the stubborn stains.  
Incorrect temperature  
was set.  
Make sure that you set the cor-  
rect temperature.  
Too much laundry load.  
Decrease the laundry load.  
After the check, activate the appliance.  
The programme continues from the point  
of interruption.  
If the problem occurs again, contact the  
service centre.  
If the display shows other alarm codes,  
contact the service centre.  
 
28  
INSTALLATION  
UNPACKING  
1.  
Use the gloves. Remove the external  
film. If necessary, use a cutter.  
2.  
3.  
Remove the cardboard top.  
Remove the polystyrene packaging  
materials.  
4.  
Remove the internal film.  
5.  
Open the door and remove all the  
items from the drum.  
 
ENGLISH  
29  
6.  
Put one of the polystyrene packaging  
elements on the floor behind the ap-  
pliance. Carefully put down the appli-  
ance with the rear side on it. Make  
sure not to damage the hoses.  
7.  
8.  
Remove the polystyrene protection  
from the bottom.  
Pull up the appliance in vertical posi-  
tion.  
1
2
9.  
Remove the power supply cable and  
the drain hose from the hose holders.  
10.  
11.  
Remove the three bolts. Use the key  
supplied with the appliance.  
Pull out the plastic spacers.  
 
30  
12.  
Put the plastic caps in the holes. You  
can find these caps in the user man-  
ual bag.  
– We recommend that you keep  
the packaging and the transit  
bolts for when you move the  
appliance.  
– If the appliance is delivered in  
the winter months when there  
are minus temperatures. Store it  
at room temperature for 24  
hours before using for the first  
time.  
POSITIONING AND LEVELLING  
• Install the appliance on a flat hard floor.  
• Make sure that carpets do not stop the  
air circulation below the appliance.  
• Make sure that the appliance does not  
touch the wall or other units  
• Loosen or tighten the feet to adjust the  
level. A correct adjustment of the appli-  
ance level prevents the vibration, noise  
and the movement of the appliance  
when in operation.  
x4  
• The appliance must be level and stable.  
 
ENGLISH  
31  
CAUTION!  
Do not put cardboard, wood or  
equivalent materials below the  
appliance feet to adjust the level.  
THE INLET HOSE  
• Connect the hose to the appliance.  
Turn the inlet hose only left or right.  
Loose the ring nut to set it in the cor-  
rect position.  
O
45  
O
20  
• Connect the water inlet hose to the  
cold water tap with 3/4 thread.  
CAUTION!  
Make sure that there are no leaks  
from the couplings.  
Do not use an extension hose if  
the inlet hose is too short. Contact  
the service centre for the replace-  
ment of the inlet hose.  
Water-stop device  
The inlet hose has a water stop device.  
This device prevents water leaks in the  
hose because of its natural ageing. The  
red sector in the window «A» shows this  
fault .  
If this occur, close the water tap and con-  
tact the service centre to replace the  
hose.  
A
 
32  
WATER DRAINAGE  
There are different procedures to connect  
the drain hose:  
With the plastic hose guide.  
• On the edge of a sink.  
• Make sure that the plastic guide cannot  
move when the appliance drains. At-  
tach the guide to the water tap or the  
wall.  
• To a stand pipe with vent-hole.  
Refer to the illustration. Directly into a  
drain pipe at a height of not less than  
60 cm and not more than 100 cm. The  
end of the drain hose must always be  
ventilated , i.e. the inner diameter of  
the drainpipe must be larger than the  
external diameter of the drain hose.  
Without the plastic hose guide.  
• To a sink spigot.  
Refer to the illustration. Put the drain  
hose in the spigot and tighten it with a  
clip. Make sure that the drain hose  
makes a loop to prevent that remaining  
particles go in the appliance from the  
sink.  
 
ENGLISH  
33  
• Directly to a built-in drain pipe in the  
room wall and tighten it with a clip.  
You can extend the drain hose to  
maximum 400 cm. Contact the  
service centre for the other drain  
hose and the extension.  
 
34  
 
ENGLISH  
35  
 
132928260-A-502011  
 

Addonics Technologies Computer Hardware ADMS6GPX2 User Manual
Aiphone Stereo Amplifier LAH 20 User Manual
Airlink101 Network Router AR570W User Manual
Alpine Car Stereo System CDE W233R User Manual
Alto Shaam Food Warmer EC2 48 User Manual
ATN Telescope Mk6500 User Manual
Behringer Music Pedal DI600P User Manual
Beko Dishwasher D 5001 E User Manual
Beko Freezer DN 143120 User Manual
BK Stereo Amplifier ST3030 Series II User Manual