SDEC1000A & SDEC2500A Flash Chip Exchange Instructions
To:
JBL SIS Dealers & Reps
Chris Neumann
From:
Subject: Transferring SDEC settings by swapping Flash IC’s
Date: 6/18/02
When replacing an SDEC Digital Equalizer, as an alternative to using the Loader
utility, the flash memory chips on the DSP Engine inside the SDEC, which contain the
programmed filter, delay and crossover settings may be swapped. With SDEC1000/A
swapping flash chips is a more reliable method of transferring files to a replacement
unit. Follow the procedure below to swap SDEC.d97 file settings.
1. Remove the malfunctioning SDEC from the equipment rack.
2. Remove the SDEC top cover.
Headroom DIP
Switches
DSP
Engine
Board
U3 on DSP Engine
1V6 for SDEC1000/A
2V6 for SDEC2500/A
Fig. 1
Fig. 2
3. Locate U3 on the DSP Engine Board (see Fig.2).
|
Addlogix Network Hardware CTK LNTRK User Manual
Admiral Air Conditioner AAWV 06CR1FAU User Manual
Agilent Technologies Welding System 6030A User Manual
Aiwa Stereo System CSD EL300 User Manual
Alesis DVR ALESIS M20 User Manual
Amcor Refrigerator WV 50 User Manual
Atlas Indoor Furnishings MLG180B User Manual
Audiovox Automobile Alarm APS 596a User Manual
Audiovox Remote Starter PRO 9675FT4 User Manual
Baldor Portable Generator GLC10 User Manual