Agilent Technologies 8590 User Manual

Agilent 8590 C/E/L/Q and EM  
Series  
Spectrum Analyzers and  
Accessories  
Configuration Guide  
8591C Cable TV Analyzer (1 MHz to 1.8 GHz)  
8594L RF Spectrum Analyzer (9 kHz to 2.9 GHz)  
8594Q QAM Analyzer (9 kHz to 2.9 GHz)  
8591EM EMC Analyzer (9 kHz to 1.8 GHz)  
8593EM EMC Analyzer (9 kHz to 22 GHz)  
8594EM EMC Analyzer (9 kHz to 2.9 GHz)  
8595EM EMC Analyzer (9 kHz to 6.5 GHz)  
8596EM EMC Analyzer (9 kHz to 12.8 GHz)  
8591E RF Spectrum Analyzer (9 kHz to 1.8 GHz)  
8593E Microwave Spectrum Analyzer (9 kHz to 22 GHz)  
8594E RF Spectrum Analyzer (9 kHz to 2.9 GHz)  
8595E RF Spectrum Analyzer (9 kHz to 6.5 GHz)  
8596E Microwave Spectrum Analyzer (9 kHz to 12.8 GHz)  
8590L Spectrum Analyzer (9 kHz to 1.8 GHz)  
8592L Microwave Spectrum Analyzer (9 kHz to 22 GHz)  
Agilent 8590 C/E/L/Q and EM Series Options (continued)  
3
Agilent 8590 C/E/L/Q and EM Series Retrofit Kits10  
(for option installation after analyzer purchase)  
4
Agilent 8590 C/E/L/Q and EM Series Measurement Personalities13  
5
Agilent 8590 C/E/L/Q and EM Series Accessories  
o
11867A  
RF Limiter (type-N(f) to type-N(m), DC to 1.8 GHz, <.75 dB  
insertion loss)  
For Scalar Measurements  
o
o
85630A  
86205A  
Scalar 50 Ohm transmission/reflection test set  
o
o
o
o
o
o
o
o
11930B  
Power limiter (5 MHz to 6 GHz)  
Active probe (5 Hz to 500 MHz)  
High frequency probe (300 kHz to 3 GHz)  
Portable AC power source  
50 Ohm RF bridge (type-N(f), 300 kHz to 6 GHz,  
1.5 dB +0.1 dB/GHz insertion loss)  
41800A  
o
86207A  
75 Ohm RF bridge (type-N(f), 300 kHz to 3 GHz,  
1.5 dB +0.1 dB/GHz insertion loss)  
85024A  
85901A  
85902A  
Burst carrier trigger  
For EMC Measurements  
o
o
11945A  
11947A  
Close field probe set (9 kHz to 1 GHz) (with Option E51)16  
1420-0383  
1494-0060  
Memory card battery (CR 2016)  
Rack slide for rack mount  
Transient limiter (BNC(f) to type-N(m), 9 kHz to 200 MHz,  
10 dB insertion loss)  
08590-60369 RS-232/parallel connector assembly to convert Opt. 041  
(GPIB) to Opt. 043 (RS-232)  
Printers and Accessories  
o
08590-60368 GPIB/parallel connector assembly to convert Opt. 043  
Most Hewlett-Packard DeskJet and LaserJet (PCL 3 compatible) printers are  
compatible with 8590 series spectrum analyzers. Printer compatibility chart  
(RS-232) to Opt. 041 (GPIB)  
o
o
9211-5604  
5062-4841  
Transit case  
Rack mount without handles20 (centers instrument in  
rack)  
Rack mount with handles20 (centers instrument in rack)  
Rack mount with handles20 (mounts instrument left of  
center)  
Rack mount without handles20 (mounts instrument left of  
center)  
o
o
10833A  
24542U  
GPIB cable (1 meter)  
RS-232 cable 3 meter (9 pin F to 9 pin F) Option 043 only  
(for RS-232 9 pin PC connection to analyzer)  
o
o
5062-4840  
5062-8240  
o
24542G  
RS-232 cable 3 meter (25 pin M to 9 pin F) Option 043  
only (for RS-232 25 pin PC or printer connection to  
analyzer)  
o
5062-8241  
o
o
24542M  
C2932A  
RS-232 cable 3 meter (25 pin M to 9 pin F) Option 043  
only (for RS-232 25 pin modem connection to analyzer)  
o
o
5180-9055  
5063-0654  
CRT viewing hood (sun shield)  
RS-232 cable 3 meter (9 pin M to 9 pin F) Option 043 only  
(for serial 9 pin LaserJet 4P/4Plus connection to  
analyzer)  
Frequency accuracy retrofit kit for 8590B and 8590D  
Agilent 8590 C/E/L/Q-Series Manuals  
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
08590-90234 8590 E/L Series user's guide  
08590-90243 8590 E/L Series quick reference guide  
08590-90235 8590 Series programmer's guide  
o
o
o
13242G  
C2950A  
RS-232 cable (5 meter) (for Option 023 only)  
Parallel printer cable (2 meter)  
ITEL-45CHVUB GPIB/Parallel converter (North America, Japan, Korea,  
and Taiwan)  
5960-6588  
5960-6590  
5960-6592  
5960-6594  
5960-6596  
8590 E/L Series quick reference guide in French  
8590 E/L Series quick reference guide in German  
8590 E/L Series quick reference guide in Italian  
8590 E/L Series quick reference guide in Spanish  
8590 E/L Series quick reference guide in Japanese  
o
ITEL-45CHVEB GPIB/Parallel converter (Continental Europe, U.K.,  
Australia, and South Africa) (requires F1011A AC adapter)  
Amplifiers and Preamplifiers  
o
o
o
o
o
o
8447D  
Preamplifier (100 kHz to 1.3 GHz, >25 dB gain)  
Preamplifier (1 GHz to 26.5 GHz, 30 dB gain)  
Broadband preamplifier (2 MHz to 1300 MHz, 22 dB gain)  
75 Ohm preamplifier (45 MHz to 1GHz, 20 dB gain)  
Amplifier (10 MHz to 3 GHz, 22 dB gain)  
8449B  
08590-90260 8590 E/L Series user’s guide for Taiwan in Chinese  
08590-90261 8590 E/L Series user’s guide for China in Chinese  
10855A  
85905A  
87405A  
87415A  
5962-5001  
5962-5002  
8590 E/L Series user’s guide in French  
8590 E/L Series user’s guide in German  
Amplifier (2 GHz to 8 GHz, 25 dB gain)  
08590-90286 8590 E/L Series user’s guide in Italian  
5962-5004 8590 E/L Series user’s guide in Spanish  
Other Accessories  
08590-90269 8590L calibration guide  
08594-90183 859x C/E Series calibration guide  
08592-90082 8592L calibration guide  
o
o
o
D4950A  
346B  
Keyboard  
Noise source (BNC(f) to APC 3.5(m), 10 MHz to 18 GHz)  
11693A  
Limiter (type-N(f) to type-N(m), 0.1 GHz to 12.4 GHz,  
<2.0 dB insertion loss)  
5963-2950  
5963-2951  
8590 C/E/L/Q Series assembly level repair guide  
8590 C/E/L/Q Series component level repair guide  
o
11694A  
75/50 Ohm matching transformer (BNC(f) to BNC(m),  
3 MHz-500 MHz, <.75 dB insertion loss)  
08591-90129 8591C Cable TV analyzer user's guide, spectrum analyzer  
reference  
o
o
0955-1020  
11742A  
50 to 75 Ohm adapter. Same as Opt. 711  
High frequency blocking capacitor (3.5mm(f to m)), 10 MHz  
to 26.5 GHz, .35 dB IL <12.4 GHz, .7 dB IL <26.5 GHz)  
o
o
08591-90176 8591C Cable TV analyzer user’s guide, cable TV measure-  
ments  
o
11852B  
Order with Option C04, 75/50 Ohm min. loss pad (type-  
N(f) to type-N(m), DC to 2 GHz, 5.7 dB insertion loss)  
08591-90130 8591C getting started and quick reference guide  
6
Agilent 8590 C/E/L/Q and EM Series Notes  
1. For more information please contact your local Agilent sales  
representative.  
2. 8593 EM only  
3. Quasi-peak detection and AM/FM demodulator is standard on 8590  
EM-series and has additional capacity compared to Option 103.  
4. Programming manual included  
5. Options 101 and 102 required for TV sync trigger capability. See  
Option 301.  
6. 85717A measurement personality required  
7. 85719A measurement personality required  
8. ABF Quick reference and user’s guides in French  
ABD Quick reference and user’s guides in German  
ABZ Quick reference and user’s guides in Italian  
ABE Quick reference and user’s guides in Spanish  
ABJ Quick reference guide in Japanese  
AB0 Quick reference guide for Taiwan in Chinese  
AB2 Quick reference guide for China in Chinese  
9. An incremental cost will be added to the base price of Options  
W30/W32/W34/W50/W52/W54 for an 859xC/E/L/Q containing  
Options 010, 011, or 130.  
10. Parts only kits. No installation included. May require new analyzer  
firmware.  
11. Option 003 (card reader) on the 8590L, 8592L and 8594L is required.  
12. For more information on EMC products and configurations see lit. num-  
ber 5964-6089E.  
13. Refer to measurement personality product literature for required 8590  
series option configuration.  
14. Except 8591 EM  
15. Video tests not supported on 8590L, 8592L or 8594L.  
16. Option E51 comes with preamplifier, carrying case, cables and  
connectors.  
17. Tracking generator retrofit requires factory installation of Option K10.  
18. Cable TV measurements are formatted for local country's cable TV  
standards.  
19. Modulation accuracy measurements not supported on 8591E.  
20. Rack height is 8.75 inches.  
21. Not for analyzer operation while in carrying case  
22. Options 021, 023 and 024 or 041 and 043 cannot be combined.  
23. Not compatible with Option 107  
24. Not compatible with other demodulator options (102, 103, 110, 112,  
or 301).  
25. Compatibility with 8591E limited to CDMA applications only  
26. Compatible with serial prefixes 3523A or 3525U and higher  
27. Compatible with serial prefixes lower than 3523A or 3525U  
28. If Options 009 and 010 are combined on the 8593E/94E/95E/96E or  
8590 EM series; only one option card slot is required.  
29. Not compatible with Options 101 and 301  
30. Requires Option 111. Not compatible with 8591E.  
31. NTSC Cable TV analyzers only  
32. Option 107 is not compatible with Option 180.  
33. 85721 Cable TV measurement personality required  
34. 11770A Link measurements personality required. Do not order Option  
010 with Option 111.  
35. Option 160 and 163 are not compatible.  
7
By internet, phone, or fax, get assistance with all your  
test and measurement needs.  
Agilent Technologies’ Test and Measurement  
Support, Services, and Assistance  
Agilent Technologies aims to maximize the value you receive,  
while minimizing your risk and problems. We strive to ensure  
that you get the test and measurement capabilities you paid  
for and obtain the support you need. Our extensive support  
resources and services can help you choose the right Agilent  
products for your applications and apply them successfully.  
Every instrument and system we sell has a global warranty.  
Support is available for at least five years beyond the produc-  
tion life of the product. Two concepts underlie Agilent’s  
overall support policy: “Our Promise” and “Your Advantage.”  
Online Assistance  
Phone or Fax  
United States:  
(tel) 1 800 452 4844  
Canada:  
(tel) 1 877 894 4414  
(fax) (905) 206 4120  
Europe:  
(tel) (31 20) 547 2323  
(fax) (31 20) 547 2390  
Our Promise  
“Our Promise” means your Agilent test and measurement equip-  
ment will meet its advertised performance and functionality.  
When you are choosing new equipment, we will help you with  
product information, including realistic performance specifica-  
tions and practical recommendations from experienced test  
engineers. When you use Agilent equipment, we can verify that  
it works properly, help with product operation, and provide  
basic measurement assistance for the use of specified capabili-  
ties, at no extra cost upon request. Many self-help tools are  
available.  
Japan:  
(tel) (81) 426 56 7832  
(fax) (81) 426 56 7840  
Latin America:  
(tel) (305) 269 7500  
(fax) (305) 269 7599  
Australia:  
(tel) 1 800 629 485  
(fax) (61 3) 9272 0749  
Your Advantage  
“Your Advantage” means that Agilent offers a wide range of  
additional expert test and measurement services, which you  
can purchase according to your unique technical and business  
needs. Solve problems efficiently and gain a competitive edge  
by contracting with us for calibration, extra-cost upgrades, out-  
of-warranty repairs, and on-site education and training, as well  
as design, system integration, project management, and other  
professional services. Experienced Agilent engineers and tech-  
nicians worldwide can help you maximize your productivity,  
optimize the return on investment of your Agilent instruments  
and systems, and obtain dependable measurement accuracy  
for the life of those products.  
New Zealand:  
(tel) 0 800 738 378  
(fax) (64 4) 495 8950  
Asia Pacific:  
(tel) (852) 3197 7777  
(fax) (852) 2506 9284  
Product specifications and descriptions in this  
document subject to change without notice.  
Copyright © 1998, 2000 Agilent Technologies  
Printed in U.S.A. 7/00  
5963-6858E  

Alpine 68 21627Z10 A User Manual
Bushnell NIGHT VISION 26 2429 User Manual
Canon MD 216 User Manual
Cisco Systems OL 20811 01 User Manual
Hamilton Beach Blender 50246 User Manual
Hitachi VM H 655 LA User Manual
Hypertec Messenger N11598PHY User Manual
JBL CS60 2 User Manual
JVC GR AX237 User Manual
JVC GR DVA1 User Manual