PoE Splitter Adapter
Power over Ethernet
PART NUMBER
DESCRIPTION
POE-22001T
Power over Ethernet Splitter Adapter
Specifications
Standard:
LED:
IEEE802.3 10Base-T
System: power (green)
IEEE802.3u 100Base-TX
IEEE802.3af Power over Ethernet
Power Input:
DC 48V
Power Jack Diameter:
Operating Environment:
5.5 x 2.0mm, 5.5 x 2.5mm
0˚~ 40˚C (32˚ ~ 104˚F), 90% Humidity (non-condensing)
DIP:
Dimension:
DIP 5V, 7.5V, 9V, and 12V
80mm x 55mm x 26mm (L x W x H)
X1.06"
3.5" X 2.16"
Connector:
Data and Power In: 1 x RJ-45, Data pin 1,2,3,6
EMI & Safety:
FCC Class B, CE, CE/EN60950
Power Pin:
4,5(V+), 7,8(V-) and 1,2(V+), 3,6(V-)
Data Out:
1 x RJ-45, Data pin 1,2,3,6
Power Out:
5V, 7.5V, 9V, and 12V (2A@5V, Maximum)
Network Cable:
10Base-T:
4-pair UTP/STP Category 3/5e/6 cable,
EIA/TIA-568 100-ohm (up to 100m)
100Base-TX: 4-pair UTP/STP Category 5e/6 cable, EIA/TIA-
568 100-ohm (up to 100m)
908 Canada Court
City of Industry, CA 91748 U.S.A.
Phone: 626.964.7873 or 800.346.6668
Fax: 626.964.7880
e-mail: [email protected]
©UNICOM 2007. UNICOM is a trademark of UNICOM Electric, Inc. All rights reserved.
Specifications subject to change without notice.
082507
UNILT0009WP
|