InstallingtheMagneticStripReaderforthe
B-SeriesTouchcomputer
Caution:
The touch computer must be unplugged before any installation occurs.
Included Items:
•
One Elo Magnetic Strip Reader
Revision A
P/N E610216
•
Two mounting screws
5
6
1
Press a small screwdriver into the
cover between the two notches.
As the cover bends up, grasp the
end and peel it away.
Turn off the touch computer.
2
3
Plug the cable into
the connector on the
touchcomputer.
Choose a location to attach the
magnetic stripe reader.
7
Remove the two accessory
covers over the chosen
mounting location.
Insert the hooks on the device
into the corresponding slots on
the touch computer.
8
4
Secure the device to the touch-
computer using the included
screws.
To remove each cover, locate
the two small notches on the
cover.
|