Owner’s Manual
Line Conditioners
(230V, 50/60Hz)
Important Safety Instructions
Quick Installation
Basic Operation
2
3
3
4
4
Service & Warranty
Specifications
5
9
Español
Français
1111 W. 35th Street Chicago, IL 60609 USA
Copyright © 2002 Tripp Lite. All rights reserved.
Quick Installation
1
Connect your equipment to
the line conditioner, and the
line conditioner to an
electrical outlet.
1) Unplug your computer’s power cord
from both your AC outlet and your
computer’s AC input.
A
B
1
2
2) Insert the line conditioner’s cord’s (A)
female plug into your computer’s AC
input. Insert its male plug into any of
the line conditioner’s output receptacles.
3) Insert the female plug of your
computer’s cord (B) into your line
conditioner’s AC input. Insert its male
plug into your AC outlet.
2
3
Plug your computer and
electronics into your line
conditioner’s outlets.
Turn your line conditioner’s
power switch on.
3
Basic Operation
Indicator Lights
Your line conditioner has up to 3 indicator lights. All indicator light descriptions apply when the
line conditioner is plugged into a wall outlet and turned on. Note: As the line conditioner
corrects high or low input voltage, the unit will make a gentle clicking sound. The frequency of
the clicking will depend on the quality of the utility power in your particular area. The clicking
is normal, and no action is required on your part.
BOOST (Multiple LED Models Only): This yellow light will turn
ON whenever your line conditioner is boosting low AC line voltage up
to nominal voltage levels.
Boost
Normal
Trim
NORMAL (Multiple LED Models Only): This green light will turn
ON whenever your line conditioner is receiving normal AC line
voltage.
TRIM (Multiple LED Models Only): This yellow light will turn ON
whenever your line conditioner is trimming high AC line voltage down
to nominal voltage levels.
3
continued
Basic Operation
Other Line Conditioner Features
Lighted Power Switch/Input Breaker
Flip this switch to ON to activate power at the line conditioner’s
receptacles. This switch will light up when the line conditioner is
plugged in and turned on. This switch will trip to prevent dangerous
input voltage from damaging the line conditioner. If this happens, wait
for the line conditioner to cool, then flip the switch back to reset the
breaker.
AC Receptacles
These IEC 320F receptacles provide your connected equipment with
AC line power during normal operation. They adjust incoming voltage
to provide equipment with nominal 230V power. These receptacles
also protect your equipment against damaging surges and line noise,
eliminating the need for external surge suppression.
Service & Warranty
If returning your line conditioner to Tripp Lite or an authorized Tripp Lite service center,
please carefully pack it using the ORIGINAL PACKING MATERIAL that came with the unit.
Enclose a letter describing the symptoms of the problem. If the line conditioner is within the
warranty period, enclose a copy of your sales receipt.
2-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of two
years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or
replacing (at its sole option) any such defective products.To obtain service under this warranty, you must obtain
a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation
charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date
and place of purchase.This warranty does not apply to equipment which has been damaged by accident, negligence
or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser
who must have properly registered the product within 10 days of purchase.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s)
may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any
costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data,
costs of substitutes, claims by third parties, or otherwise.
Specifications
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Model
Series
LR604
AGLR600Q2
Nominal Voltage:
Input Frequency:
Input Voltage Range:
Output Capacity (VA/Watts):
Approvals:
230 volts
50/60 Hz
179 - 270 volts
600/600
CE
ALL UNITS: AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>20 dB at 1MHz);
AC Protection Modes (H to N).
4
1111 W. 35th Street, Chicago, IL 60609 USA
773.869.1234 (USA) • 773.869.1212 (International)
200204171 93-2036_EN
|