Project
Quantity
Item #
Model Specified:
CSI Section 11400
"N-Width" Hinged Glass Door Reach-In
Two & Three Section Models, 32" Deep
Refrigerators/Self-Contained
2-Section Full Length Door Model
3-Section Full Length Door Model
2-Section Half Length Door Model
3-Section Half Length Door Model
RHT232NUT-FHG
RHT332NUT-FHG
RHT232NUT-HHG
RHT332NUT-HHG
R
SERIES
Stainless Exterior
& Interior
2-Section Full Length Door Model
3-Section Full Length Door Model
2-Section Half Length Door Model
3-Section Half Length Door Model
AHT232NUT-FHG
AHT332NUT-FHG
AHT232NUT-HHG
AHT332NUT-HHG
INTELA-TRAUL®
Equipped!
A
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
The R &ASeries represent Traulsen's Top-of-the-Line product offering. These
“N-Width” reach-in refrigerator models are equipped with hinged glass doors
in order to maximize product visibility. Each is supplied standard with such
high quality features as balanced refrigeration systems, microprocessor
controls, communications ability and stainless steel exteriors. Additionally,
they offer the widest range of optional accessories to choose from, and can
be specified for use with many different applications, including: Foodservice,
Correctional, Institutional, Export, etc.
Model RHT232NUT-HHG
(shown with optional interior arrangements)
Standard Product Features
Options & Accessories
•
•
•
•
•
•
•
•
•
•
•
R-Series: Stainless Steel Exterior & Interior
A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
INTELA-TRAUL® Microprocessor Control System
Balanced, Self-Contained Refrigeration System Using R-134a
Scroll Blower Type Evaporator Fan
•
•
•
•
Stainless Steel Finished Back With Rear Louvers
Fluorescent Lights
Re-Hinging Feature For Door(s)
No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C.
No. 3 Type Tray Slides To Accommodate (2) 12" x 20" Steam
Table Pans, Adjustable To 2" O.C. (see notes below)
No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans (chrome rod type, equips 1/2 section)
Universal Type Tray Slides To Accommodate Either (1)
18" x 26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam
Table Pans, Adjustable To 4" O.C. (see notes below)
Additional Chrome Plated Shelves
Biased Return Air Duct
•
•
•
•
Full or Half Length Hinged Glass Doors With Locks
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges
Stainless Steel Vertical Door Handles
Standard Door Hinging: 232N = Left/Right,
332N = Left/Right/Right (other hingings available)
Incandescent Lights With Exterior Switch
Stainless Steel Breaker Caps
Three Chrome Plated Adjustable Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
Automatic Non-Electric Condensate Evaporator
Magnetic Snap-In Door Gaskets
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Export 220/50/1 Voltage
•
•
•
•
•
•
•
•
•
•
208/115/60/1 Voltage In Lieu Of Standard 115/60/1
Stainless Steel Shelves In Lieu of Standard Chrome Plated
Kool Klad Exterior Laminate Decor
Set of Four (4) 6" High Casters In Lieu of Legs
Set of Four (4) 4-5/8" High Casters In Lieu of Legs
4-1/2" High Stainless Steel Base In Lieu of Legs
6" High Stainless Steel Kickplate (for use with standard legs)
Remote Applications (see spec sheet 12-2 for more details)
Two Year Service/Labor Warranty Available
Controllable Anti-Condensate Door Perimeter Heaters
Thermostatic Expansion Valve Metering Device
Stainless Steel One-Piece Louver Assembly
9' Cord & Plug Attached
Set of Four (4) 6" High Adjustable Stainless Steel Legs
One Year Parts And Labor Warranty
Two Year Control Warranty (parts and labor)
Five Year Compressor Warranty
Please Note: Universal and #3 Type Tray slides are not
available for these models when ordered with optional
fluorescent lighting.
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
11-4
|