TFT LCD COLOR MONITOR
User’s manual
ModelΚLCD-1513VB 15.1ϛ
ModelΚLCD-1513TS 15.1ϛ
R
Ϥ
1319 Dexter Avenue N.#020,
Seattle,WA 98109
TELΚ206/623-6000
FAXΚ206/623-6609
Introduction
z
z
z
z
z
Audio-1, Audio-2, and PC line in sound application.
Power management system conforms to VESA DPMS standard.
Support DDC1/2B for Plug & Play compatibility.
Product Description
Advanced OSD control for picture quality adjustment.
Detachable stand for wall-mounting application.
Congratulations on purchasing the next generation of LCD monitor display! This
state-of-the-art high brightness LCD monitor incorporates high quality display into a small light
weighted module. It has power-saving capabilities and emits no harmful X-ray radiation. You will
certainly enjoy the benefit of its features: high brightness for better visibility under any given
environment, expanded color domain for better quality images, and further viewing distance for
comfort and safety.
Cleaning
z
Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. This
removes dust and other particles that can scratch the screen.
This LCD monitor incorporates 15” color active matrix thin-film-transistor (TFT) liquid
crystal display with ABT (Advanced Brightness Technology) that makes the screen much more
brighter in order to provide superior display performance, especially for movies and picture
display. Maximum resolution of XGA 1024 x 768 is ideal for displaying complex graphics and high
definition images. Other outstanding designs that enhance this LCD monitor’s performance are
Plug & Play compatibility, audio system, A/V input, and users friendly OSD (On Screen Display)
controls.
z
z
Do not apply pressure to the screen surface when wiping it clean.
Do not pour or spray any liquid directly onto the screen or case of the LCD monitor.
Chemical cleaners have been reported to damage the screen or case of the LCD monitor.
Package Contents
Included with your LCD monitor are following itemsΚ
z
z
z
z
z
z
15” TFT LCD monitor
15 pin D-sub signal cable
AC power cable
User’s manual
Sound Card Cable
Adaptor & AC Cord
Product Features
z
z
z
z
High contrast color TFT LCD display support resolution up to XGA 1024 x 768.
Compatible with IBM VGA, VESA, and Macintosh standards.
Imbedded audio system provides sound performance.
2 AV-IN and S-video use.
Page.3
Page.2
Control Function
4.OSD Menu / SelectΚPressing this button pops up the OSD menus on the screen, and used to
select the OSD control options on the screen.
Control Button Front View
5.IncreaseΚThis button is used to adjust the increasing value of selected OSD control option.
6.DecreaseΚThis button is used to adjust the decreasing value of selected OSD control option.
ˆˁˣ̂̊˸̅ʳ˟˘˗ʳ
ˇˁˢ˦˗ʳˠ˸́̈ʳ˂ʳ˦˸˿˸˶̇
ˈˁ˜́˶̅˸˴̆˸
ˉˁ˗˸˶̅˸˴̆˸
˅ˁ˘˴̅̃˻̂́˸
˄ˁˣ̂̊˸̅ʳ˦̊˼̇˶˻
1.Power SwitchΚPressing this button turns the display system power on or off.
2.EarphoneΚThis input would offer users another better choice in using a monitor without
disturbing others.
3.Power LEDΚThis Power LED indicates different status when this unit operates in different
modes.
Page.4
Page.5
OSD
Tools MenuΚ
Monitor Function Selection MenuΚ
Input AV1: 1st Video-out connector of any image resource
Auto AdjustΚSelect this function can make the monitor have best efficiencyΖ
BrightnessΚAdjust the brightness using Ѐ and Ё buttons.
ContrastΚAdjust the contrast using Ѐ and Ё buttons
ClockΚAdjust the clock using Ѐ and Ё buttons
Input AV2Κ2nd Video-out connector of any image resource
Input S-VideoΚS Video-out connector of any image resource
VolumeΚAdjust the volume using Ѐ and Ё buttons
MuteΚMute function.
PhaseΚAdjust the phase using Ѐ and Ё buttons
ResetΚreset function.
Horizontal PositionΚPressing Ѐ moves the display image to right; Pressing Ё
moves the display image to left
Vertical PositionΚPressing Ѐ moves the display image upward; Pressing Ё
moves the display image downward
Page.6
Page.7
RGB Adjusting MenuΚ
RedΚRed Range
OSD Function Selection MenuΚ
Exit OSDΚExit the OSD function selection menu.
OSD Horizontal PositionΚPressing Ѐ moves the OSD menu to right; Pressing Ё
moves the OSD menu to left
GreenΚGreen Range
BlueΚBlue Range
OSD Vertical PositionΚPressing Ѐ moves the OSD menu upward; Pressing Ё
moves the OSD menu downward
OSD Time OutΚSet the OSD time
Moiré AdjustΚSet panel moiré degrees and noise.
Page.8
Page.9
Precautions
Inputs Diagram
Inputs
z
z
Read all of these instructions and save them for later use.
Follow all warnings and instructions on the product.
Product
z
z
Do not cover block the vent holes in the case.
Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They
may cause accidents, fire, electric shock or failure.
z
z
Disconnect the power plug from the AC outlet if you will not use it for an indefinite period.
Do not attempt to service this product yourself, by opening or removing covers may expose
you to dangerous voltage points or other risks.
z
Do not touch the screen directly with your fingers. You may damage the screen, and oil from
your skin in difficult to remove.
z
Do not apply pressure to screen. The LCD is a very delicate product.
Power
z
Use the type of power indicated on the marked label.
Plugs
z
Do not remove any of the prongs of the monitor’s three-pronged power plug.
Disconnect the power plug from the AC outlet under following conditionsΚ
If you will not use it for an indefinite period time.
μ1ν μ2ν μ3νμ4ν
z
z
μ5νμ6νμ7νμ8ν
z
When the power cord or plug is damaged or frayed.
μ1νAUDIO1ΚThis can be connected to the 1st audio-out connector of any sound resource.
μ2νAUDIO2ΚThis can be connected to the 2nd audio-out connector of any sound resource.
μ3νLINE INΚThis can be connected to the 3rd audio-out connector of any sound resource.
μ4νDC INΚThis is for connecting the power cable.
z
If the product does not operate properly, adjust only those controls that are mentioned in the
operating instructions. Improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to normal
operation.
μ5νVIDEO1ΚThis can be connected to the 1st video-out connector of any video resource.
μ6νVIDEO2ΚThis can be connected to the 2nd video-out connector of any video resource.
μ7νS-VIDEOΚThis can be connected to the 3rd video-out connector of any video resource.
μ8νPC INΚThis can be connected with the D-Sub 15 pin signal connector.
z
z
z
z
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicating a need for service.
Power and extension cords
Do not allow anything to rest on the power cord.
Page.11
Page.10
z
z
Do not locate this product where persons will walk on the cord.
Display Angle
Tilting
Use the proper power cord with correct attachment plug type. If the power source is 120V
AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power cord
that meets the respective European country’s safety regulations, such as VDE for
Germany.
For viewing clarity, you can tile the LCD forwardΰup to 3 degreesα or backward ΰup to
15 degreesα.
DownΚ3 o
z
z
z
Do not overload wall outlets or power cords. Ensure that the total of all units plugged into
the wall outlet does not exceed 10 amperes.
Ensure that the total ampere ratings on all units plugged into the extension cord is not
above the cord’s rating.
If the power supply cord, which came with your monitor, is to be connected to the PC
instead of the wall outlet, this equipment is to be used with UL/TÜV approved computers
with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum).
Environment
z
z
z
Place the monitor on a flat and leveled surface.
Place the monitor in a will-ventilated place.
Keep the monitor away from the following:
Do not place unit in extreme hot, cold or humid environment and do not place it directly
under sunlight, dusty surroundings, equipment that generate strong magnetic fields.
Please adjust the frequency to 75 Hz after setting up the LCD monitor.
Then push the OSD menu button and use the Auto Adjust function to fine the best mode of
your computer.
RightΚ40o
LeftΚ40o
z
z
UpΚ15 o
Page.13
Page.12
Product Specification
Display Modes
Type
Mode
1
Resolution
640 x 350
640 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
H Freq (kHz)
31.469
24.823
31.469
31.469
35.000
37.861
37.500
31.469
35.156
37.879
48.077
46.875
49.107
48.363
56.476
60.023
V Freq (Hz)
70.087
56.416
70.087
59.940
66.667
72.809
75.000
70.087
56.250
60.317
72.188
75.000
75.087
60.004
70.069
75.029
PC
SPEAKER
AV
Spec
LCD Display
Pixel Pitch
15” active matrix TFT LCD panel
0.297(H) x 0.297(V) mm
1024(H) x 768(V) XGA
418(H) x 399(V) x 201(D) mm
480(H) x 450(V) x 230(D) mm
150:1~400:1
2
3
Max. Resolution
Set Size
4
5
Pack Size
6
Contrast Ratio
Brightness
Response Time
Display Color
View Angle L+/R-
U+/D-
7
500 ~ 1000 cd/m2
20~50ms
8
9
16.777 M
̈́60̓~̈́80̓
̈́50̓~̈́60̓
10
11
12
13
14
15
16
Pc Interface
Video Sync.
Display Mode
Audio-in
Video-in
RGB analog 0.7V peak to peak
TTL positive or negative
VGA, SVGA, XGA
Phone jack
None
None
RCA (x 2)
S & RCA (x2)
None
D-sub 15 pin
Signal Connector
Front Control
OSD
Power on/off with LED, OSD Menu, +/-Adjustment
Contrast, Brightness, Auto Adjust, Clock, Phase, H-Position,
V-Position
Input: Pc / AV1 / AV2 / S-Video (AV)
AC Input: 100-240V~1.5A, 50-60Hz
DC Output: 12V / 5.0A
Power Adapter
Operating Conditions
Storage Conditions
Temperature: 0к~35к
Humidity: 20%~95%
Temperature: -20к~60к
Humidity: 5%~95%
Certification
Weight
FCC (DOC), CE-B, VCC-I, UL, TUV/GS
Net WeightΚ4.66Kgs, Gross WeightΚ6.66Kgs
Page.15
Page.14
Service Information
Service
Appendices
Please review the warranty information located on the back of the Quick Start Guide or
contact your local authorized distributor/retailer.
Troubleshooting
If you are experiencing trouble with your LCD display, please refer to the following.
If the problem persists, please contact your local dealer or our service center.
Note: For best viewing image effect, please set resolution at 1024x768
Problem: No signal
Ensure all cables and power connections are correctly and securely connected.
Check the power LED light is in “green” color.
Make sure the computer is on.
Press the OSD “Auto Setup” for best view result.
Problem: Image is out of focus
Adjust “Phase” function inside the OSD until the image is focused.
Page.17
Page.16
|