Handsfree
®
Bluetooth Speakerphone
ET6000 User Guide
USER GUIDE
Contents
Overview..............................................................................................................................2
Getting Started ....................................................................................................................2
Unpacking ezSpeak ........................................................................................................2
Getting to Know ezSpeak ................................................................................................3
Setting Up ezSpeak..............................................................................................................4
Charging ezSpeak ..........................................................................................................4
Pairing ezSpeak to Your Mobile Phone ..........................................................................5
Mounting ezSpeak ..........................................................................................................6
Using ezSpeak ....................................................................................................................7
Powering ezSpeak ..........................................................................................................7
Making Calls ..................................................................................................................7
Receiving Calls................................................................................................................8
Ending Calls ....................................................................................................................9
Transferring Calls..........................................................................................................10
Adjusting the Volume....................................................................................................10
Muting ezSpeak ............................................................................................................11
Troubleshooting ................................................................................................................12
Limited Warranty ..............................................................................................................14
Disclaimer of Warranties ..............................................................................................14
FCC Statement ..................................................................................................................15
Customer Support ............................................................................................................16
Overview
ezSpeak™ by Tekkeon is a Bluetooth® speakerphone with a digital display that gives you the freedom
to cut loose from your Bluetooth mobile phone. With advanced features like stored number redial,
last number redial and voice dialing, you can use ezSpeak to make and receive calls without ever
touching your mobile phone. And, you can use ezSpeak in your car, at home, or anywhere that is
convenient for you.
ezSpeak is designed with Bluetooth v1.2 technology, and is backward compatible with all Bluetooth
v1.1 devices.
Getting Started
Unpacking ezSpeak
Your ezSpeak package includes the following:
User guide (not shown)
ezSpeak
Car charger
Visor clip
Swivel (for visor clip)
2
Getting to Know ezSpeak
Volume Up/Volume Down
Charging Lamp
Increases the speaker volume, mutes/unmutes
the microphone, and enables scrolling through
stored numbers
Indicates when ezSpeak is
being charged or fully charged
Digital Display
Provides caller ID, call
status, indication of device
connection, volume level,
and low battery indication
Speaker
Microphone
Answer Button
Power/End Call Button
Used to initiate pairing,
connect/disconnect the
paired phone, and
Used to turn on/off
ezSpeak, reject calls
and end calls
Charging Jack
Input for car charger
or optional wall
charger to charge
ezSpeak
make/receive calls
USER GUIDE
3
Setting Up ezSpeak
Before using ezSpeak, you must:
• Charge ezSpeak
• Pair ezSpeak to your mobile phone
• Mount ezSpeak to your visor (for in car use)
Directions for each of these activities are provided in the following three sections. Once these steps are
completed, you will be ready to use ezSpeak!
Charging ezSpeak
Before using ezSpeak, you must charge the device for a minimum of two hours. When fully charged, the
battery provides up to ten hours of talk time and up to 220 hours of standby time. When the battery is at
less than 5% of capacity, the low battery icon will appear on the display.
1. Plug the car charger into the charging jack on the end of ezSpeak.
2. Plug the car charger into the 12V charging outlet in your car. The red charging LED will light while
ezSpeak is charging. When the device is fully charged (in approximately 2 hours), the red LED will
turn to to green.
3. Unplug the car charger from the charging outlet.
4
Pairing ezSpeak to Your Mobile Phone
Pairing is the process of linking ezSpeak with your Bluetooth mobile phone or other Bluetooth device that
supports a headset and/or handsfree profile. Before using ezSpeak with your mobile phone you must
pair the devices. After this process is complete, you can use ezSpeak with your paired mobile phone.
You can pair ezSpeak with up to seven Bluetooth devices. Once each device is paired with ezSpeak, you
must disconnect the paired phone or device to connect to a different phone or device. While connected
to a different paired device, ezSpeak will not be connected to other paired devices.
BEFORE YOU PAIR ezSPEAK, ENSURE THAT THE BATTERY IS FULLY CHARGED, AND REVIEW THE
INSTRUCTIONS IN YOUR MOBILE PHONE USER GUIDE FOR PAIRING YOUR MOBILE PHONE TO A
BLUETOOTH DEVICE.
To Pair the Devices
1. With the ezSpeak turned on, press and hold
(approximately five seconds).
until “Ready to Pair” appears on the display
2. With the mobile phone turned on, initiate the Bluetooth device-pairing (discovery) feature. Refer to the
mobile phone/device user guide for instructions on initiating this feature.
3. Follow the mobile phone/device prompts, and when prompted for the passkey (also called passcode
or BT PIN), enter 1234 (the ezSpeak passkey). When pairing is complete, ezSpeak is placed in
standby mode, and ET6000 appears on the display.
4. Press
to connect ezSpeak with the paired phone. “Connecting,” followed by the name of the
phone, will appear on the display to indicate the phone is connected to ezSpeak.
NOTE: Once you’ve paired your phone with ezSpeak, you don’t need to repeat this entire procedure.
Simply follow step 4 above to connect to the last paired phone, or the last connected phone.
5
USER GUIDE
Mounting ezSpeak
When used in a car, ezSpeak is designed to be mounted to your car visor. You can use the visor clip with
or without the optional swivel clip.
To Mount ezSpeak with the Visor Clip
1. Attach the visor clip to ezSpeak by sliding the clip into the
bracket on the rear of ezSpeak as shown.
2. Slide the clip onto your car visor.
To Mount ezSpeak with the Visor Clip and Swivel
1. Remove the small bracket from the visor clip by lifting up on the prong and pulling the small bracket
away from the visor clip.
2. Attach the swivel bracket to the visor clip by sliding the
bracket onto the clip while lifting the prong. The bracket
will snap into place.
3. Attach the swivel bracket into the bracket on the rear of
ezSpeak as shown.
4. Slide the clip onto your car visor, as shown above,
adjusting the position as needed.
5. Turn the swivel screw to tighten the clip as shown.
6
Using ezSpeak
Powering ezSpeak
To Turn On ezSpeak
1. Press and hold
on the display.
approximately two seconds until the display lights up and “ET6000” appears
NOTE: To conserve power, the display will turn off after being idle for approximately eight seconds.
To view the display, simply press
.
To Turn Off ezSpeak
1. Press and hold
ezSpeak turns off.
approximately four seconds until “Power Off” appears on the display and
Making Calls
You can make calls from your mobile phone, or directly from ezSpeak using the last number redial
feature, voice dialing commands, or the stored number redial feature.
NOTE: ezSpeak must be connected with the paired phone (the phone name appears in the display).
If ET6000 is displayed instead of the phone name, you must connect to ezSpeak before making a call.
To Make Calls from Your Mobile Phone
1. Dial the number from your mobile phone. The call is automatically connected to your ezSpeak.
To Make Calls Using Last Number Redial (if supported by your mobile phone)
1. Press
twice quickly to redial the last number dialed from your mobile phone. The number is
called, and “Redial, and then “Calling” appear on the display.
7
USER GUIDE
To Make Calls Using Voice Dialing (if supported by your mobile phone)
1. Press . “Voice Dial” appears on the display and your phone is put into voice dialing mode.
2. After you hear a beep (usually between one to four seconds), speak the name of the person you wish
to call. You will hear the spoken name (if provided by your phone) and the call is automatically
connected to ezSpeak.
NOTE: The voice dial feature must be activated and the voice tag must be recorded before using this
function.
TIP: In a noisy environment where the noise may interfere with voice commands, you should dial from
the mobile phone keypad, or use any of the other advanced calling features to make the call from
ezSpeak.
To Make Calls Using Stored Number Redial
1. Press
2. Press
3. Press
for two seconds to enter Memory mode. The last received number will appear first.
or
to scroll through the numbered list of the last nine received calls.
to dial selected number. “Calling” appears on the display and the call is automatically
connected to ezSpeak.
Receiving Calls
When you receive a call on your mobile phone, both ezSpeak and your mobile phone will ring. You can
either answer the call, or reject the call and send the caller to voice mail (if available).
If the Call Waiting feature is supported by your phone, you can answer an incoming call while you are
connected on another call. In this case, the connected call is placed on hold and the incoming call is
connected. While both calls are connected, you can toggle between both.
8
To Receive a Call
1. When you hear ring tone or see “Ringing” and the calling number (if provided) on the display,
press
. The call is automatically connected to ezSpeak and “Call Active” appears in the display.
To Reject an Incoming Call (if supported by your mobile phone)
1. When you hear ring tone or see “Ringing” and the calling number on the display, press
“Call Reject” appears on the display, and the call is sent to your voice mail.
.
To Receive a Call Waiting Call (if supported by your mobile phone)
1. When you hear call waiting tone or see “Ringing” and the calling number on the display while on a
call, press twice. The first call is placed on hold, while the second call is connected.
2. To switch between the calls, press
other call is connected.
twice again. The current call is placed on hold, while the
NOTE: For some mobile phones, you must configure the phone to answer calls directly on your
Bluetooth device. Refer to the mobile phone user guide for instructions for initiating this feature.
Ending Calls
1. When you have finished your call, press
disconnected.
. “Call End” appears on the display and the call is
9
USER GUIDE
Transferring Calls
You can transfer calls between your mobile phone and ezSpeak.
To Transfer Calls from Your Mobile Phone to ezSpeak
1. With the call connected to your mobile phone, press
. “Transferring” and the connected number
appear on the display and the call is transferred to ezSpeak.
To Transfer Calls from ezSpeak to Your Mobile Phone (if supported by your mobile phone)
1. With the call connected to ezSpeak, press and hold
approximately two seconds until you see
“Transferring” on the display. The call is transferred to your mobile phone.
Adjusting the Volume
The volume can be adjusted using the volume controls on ezSpeak or your mobile phone.
To Increase the Volume
1. Press . The volume level will appear on the display. Repeat until you reach the desired level.
To Decrease the Volume
1. Press . The volume level will appear on the display. Repeat until you reach the desired level.
10
Muting ezSpeak
You can mute and un-mute the microphone temporarily so that you cannot be heard by the connected
party.
To Mute ezSpeak
1. While in talk mode, press and hold
the microphone is muted.
approximately two seconds. “Mute” appears on the display and
To Un-Mute ezSpeak
1. When the microphone is muted, press and hold . “Un-mute” appears on the display, and the
microphone is no longer muted.
11
USER GUIDE
Troubleshooting
Issue
Solution
When you initiate the Bluetooth device
pairing feature on your mobile phone,
your phone cannot find ezSpeak.
Verify that ezSpeak is placed in pairing mode (“Ready to Pair” appears
on the display). If not, place ezSpeak in pairing mode.
Ensure that ezSpeak is on and charged, and that you have paired it with
your Bluetooth mobile phone. (ezSpeak will not work with any mobile
phone that does not use Bluetooth wireless technology.)
ezSpeak is not communicating with your
mobile phone.
When you receive a call on your mobile
phone, the call is not automatically
connected to ezSpeak after you
1. Ensure that ezSpeak is charged and turned on.
2. Ensure that your Bluetooth mobile phone is set to Bluetooth mode,
and that ezSpeak (ET6000) has been selected as the connected
Bluetooth device. (This is important as most Bluetooth phones are
designed to pair with more than one Bluetooth device.)
press
.
3. For some phones, you need to manually connect the phone with
ezSpeak. In this case, simply press
to initiate the connection.
Even though ezSpeak is turned on,
the call is not automatically connected
to ezSpeak when you dial a number on
your mobile phone.
1. Ensure that your Bluetooth mobile phone is set to Bluetooth mode,
and that ezSpeak (ET6000) has been selected as the connected
Bluetooth device. (This is important as most Bluetooth phones are
designed to pair with more than one Bluetooth device.)
2. For some phones, you need to manually connect the phone with
ezSpeak. In this case, simply press
before making the call.
to connect the phone
Last number redial is not working.
Call reject is not working.
Ensure that your mobile phone supports this feature.
Ensure that your mobile phone supports this feature.
Ensure that your mobile phone supports this feature.
Ensure that your mobile phone supports this feature.
Call waiting is not working.
You cannot transfer a call from ezSpeak
to your mobile phone.
12
Troubleshooting
Issue
(continued)
Solution
Your mobile phone does not accept voice
commands when you are using ezSpeak.
Ensure that your mobile phone supports this feature and is set to voice
control mode. If your mobile phone supports voice dialing and you are
in a noisy environment, dial the number from the mobile phone as the
loud background noise may interfere with the voice commands.
You are encountering poor reception via
ezSpeak.
Verify that you have good reception on your mobile phone or move your
mobile phone closer to ezSpeak.
You hear a crackling noise when
connected on a call through ezSpeak.
You have exceeded the 30 foot-range of the Bluetooth connection.
Move your mobile phone closer to ezSpeak.
You hear a clicking noise when
connected on a call through ezSpeak.
You are experiencing interference on the connection between your
mobile phone and ezSpeak. Try changing locations.
USER GUIDE
13
Limited Warranty
The product enclosed herein is warranted to be free of operational defects for a period of one year from
the date of purchase. In the event of a defect in operation during the warranty period Tekkeon, Inc. will
replace the defective product when the owner returns all product contents. The limited warranty will be
considered void if the unit is tampered with, subject to misuse, negligence or accidental damage, has
been improperly serviced, or if the security seal is removed. This warranty is limited to replacement only
and shall not cover any other damages. Any product returned to Tekkeon, Inc. with no fault found will be
returned to the owner at the owner’s expense.
To obtain warranty coverage, please complete and submit the enclosed ezSpeak registration card.
Disclaimer of Warranties
Any user of this product does so at the user’s own risk. To the maximum extent permitted by applicable
law, Tekkeon, Inc. and its suppliers provide the hardware and any support services related thereto “as is”
and with all faults; and hereby disclaim all warranties and conditions, whether express, implied or
statutory, including, but not limited to implied warranties of merchantability, fitness for a particular
purpose, non-infringement, lack of negligence or correspondence to description, except for those
warranties specifically and expressly provided in the Limited Warranty.
With respect to the use of this product, in no event shall the company be liable for any loss of profit or
any other commercial damage, including but not limited to special, incidental, consequential and other
damages.
14
FCC Statement for Class B Digital Devices
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
• Reorient or locate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
“Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.”
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
USER GUIDE
15
Customer Support
If you product is in need of repair or replacement, please contact the Tekkeon Customer Support Center
at:
Tekkeon, Inc.
c/o ezSpeak
3002 Dow Avenue, #134
Tustin, CA 92780
888-787-5888 / 714-832-1266
Tekkeon, Inc. will issue a Return Merchandise Authorization (RMA) number for all repairs or exchanges.
16
© 2006 Tekkeon, Inc.
Rev A
All Rights Reserved
ezSpeak™ is a trademark
of Tekkeon, Inc.
Cut loose. Stay loose.
|