Hardware Connection
Package Contents
1
You may see the Found New Hardware Wizard after the
adapter has been inserted. Please click ‘Cancel’.
For Windows XP
450Mbps Wireless
N
Dual Band PCI Express Adapter
Quick Installation Guide
450Mbps Wireless N Dual Band PCI Express Adapter
MODEL NO. TL-WDN4800
TL-WDN4800
QIG
For Windows Vista
Steps:
1. Turn oꢀ your computer and unplug the power cord from the computer.
2. Open the case. Locate an available PCI Express slot and remove its slot cover.
Keep the screw.
Resource CD
3. Insert the adapter into the PCI Express slot as shown above.
4. Secure the adapter with the screw removed in Step 2.
5. Close the case and insert the power cord back into the computer.
6. Turn on your computer.
System Requirement
· Windows 7
· Windows Vista
· Windows XP
MODEL NO. TL-WDN4800
(The installtion procedures in Windows 7/ Vista/ XP are similar. Here takes the procedures in Windows 7 for example.)
Software Installation
2
Insert the TP-LINK Resource CD into the CD-ROM
The InstallShield Wizard window will appear.
Click Next to continue.
Click Change to specify the destination location
or you can leave it default. Click Next to continue.
The installation process may take 1~2 minutes.
3
7
1
5
drive.
Find the model TL-WDN4800 and select Install
Driver&Utility.
Select Install TP-LINK Wireless Conꢀguration
Utility and Driver and then click Next.
Click Install to install the driver and utility for your
adapter.
The following screen will then appear.
Click Finish to complete the setup.
4
6
2
8
7106504041
|