2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 2
u s e r
m a n u a l
Sleep
IMPORTADOR
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
3
p
m
E
IBL
AT
MP
CO
/
R
W
-R
CD
EXPORTER
Thomson Inc.
P. O. Box 1976
Indianapolis, IN 46206-1976
© 2006 Thomson Inc.
Trademark(s) ® Registered
Marca(s) ® Registrada(s)
Marque(s) ® Deposée(s)
RS2050
RS2054
It is important to read this instruction book prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.
Printed In China / Impreso en China
56160680
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 6
Important Information
Important Information
• Minimum distances around the apparatus for
sufficient ventilation .
EN Safety Precautions
Important Battery Information
Caution While Driving
EN
• Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a trained
technician.
• Never operate this product with the cabinet
removed.
• Do not use your System immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system to
malfunction.
• Keep your unit away from humid areas and
abnormally hot places.
• Do not touch the player with wet hands. If
any liquid enters the player cabinet, take the
player to a trained technician for inspection.
• This compact disc player uses a laser to read
the music on the disc. The laser mechanism
corresponds to the cartridge and stylus of a
record player. Although this product
incorporates a laser pick-up lens, it is
completely safe when operated according to
directions.
• Discs rotate at high speed inside the player. Do
not use damaged, warped, or cracked discs.
• Do not touch the pick-up lens which is located
inside the disc compartment. To keep dust
from collecting on the pick-up lens, do not
leave the compartment door open for an
extended period of time. If the lens becomes
dirty, clean it with a soft brush, or use an air
blower brush designed for camera lenses.
• The apparatus shall not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
• Remove the batteries to avoid leakage if you
do not use your remote control for more than
one month.
• Discard leaky batteries immediately as leaking
batteries may cause skin burns or other
personal injuries. Dispose of batteries in the
proper manner, according to provincial and
local regulations.
• Any battery may leak electrolyte under the
following circumstances:
- if mixed with a different battery type,
- if inserted incorrectly,
- if all batteries are not replaced at the same
time,
- if disposed of in fire, or
- if an attempt is made to charge a battery not
intended to be recharged.
Use of headphones while operating an
automobile or moving vehicle is not
recommended and is unlawful in some states and
areas. Be careful and attentive on the road. Stop
operation of the unit if you find it disruptive or
distracting while driving.
• The ventilation should not be impeded by
covering the ventilation opening with items,
such as newspaper,table-cloths,curtains,etc.
• No naked flame sources,such as lighted
candles,should be placed on the apparatus.
• Attention should be drawn to the
environmental aspects of battery disposal .
Don’t Infringe
Precautions for the mp3 Player
This product should only be used for the purposes
for which it is sold, that is, entertainment,
violating no copyright law. Any attempts to use
this product for which it is not intended is
unlawful and therefore not condoned by
Thomson.
• Do not use the unit immediately after
transportation from a cold place to a warm
place; condensation problem may result.
• Do not store the unit near fire, places with
high temperature or in direct sunlight.
• Do not operate or store unit in places with
frequent static electricity or electrical noise
(e.g. speaker, TV set).
• Clean the unit with a soft cloth or a damp
chamois leather. Never use solvents.
• The unit must only be opened by qualified
personnel.
Headset Safety
• Do not play your headset at high volume.
Hearing experts warn against extended high-
volume play.
• If you experience ringing in your ears, reduce
volume or discontinue use.
• You should use with extreme caution or
temporarily discontinue use in potentially
hazardous situations.
Even if your headset is an open-air designed to
let you to hear outside sounds, do not turn up
the volume so high that you are unable to
hear what is around you.
Note:
This unit may temporarily cease to function
if subjected to electrostatic disturbance.
To resume normal operation, it may be
necessary to cycle the power off and back
on or to remove and reinstall the batteries.
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 8
Table of Contents
Getting Started
FCC Information
Recording . . . . . . . . . . . . . . . . . . . .16
Content of Box
EN
Connections of Antennas and
Speakers
EN
Recording CD to mp3 player . . . . . . . . . . . . . .16
Recording Standby . . . . . . . . . . . . . . . . . . . .16
Instant Recording . . . . . . . . . . . . . . . . . . . . .16
Recording Tuner / AUX to mp3 player . . . . . .16
Instant Recording . . . . . . . . . . . . . . . . . . . . .16
Program Recording . . . . . . . . . . . . . . . . . . .17
Recording to USB device . . . . . . . . . . . . . . . . .17
Deleting Files from mp3 player / USB Device 17
• one main unit (with 2 main speakers);
• one remote control;
• one AM loop antennas;
• one mp3 Player;
Important Information
Table of Contents . . . . . . . . . . . . . . .1
3
4
• one user manual;
• one safety leaflet;
• Owner registration Card.
1
Getting Started . . . . . . . . . . . . . . . .2
Content of Box . . . . . . . . . . . . . . . . . . . . . . . . . .2
Connections of Antennas and Speakers . . . . .2
2
General Controls . . . . . . . . . . . . . . .4
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .5
Advanced Playback Controls . . . . .18
Intro/ Repeat/Random . . . . . . . . . . . . . . . . . . .18
Setting Up a Program List . . . . . . . . . . . . . . . .18
Rename Tracks . . . . . . . . . . . . . . . . . . . . . . . . .19
!
Warning:
Display . . . . . . . . . . . . . . . . . . . . . . .7
Use of this product is for your personal use
only. Unauthorized recording or duplication
of copyrighted material may infringe upon
the rights of third parties and may be
contrary to copyright laws.
Advanced Navigation Controls . . .20
File Navigation . . . . . . . . . . . . . . . . . . . . . . . . .20
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Remote Control . . . . . . . . . . . . . . . . . . . . . .20
Tips on Playback Sequence of Disc . . . . . . . . .21
Settings . . . . . . . . . . . . . . . . . . . . . .8
Setting the Clock / Timer . . . . . . . . . . . . . . . . . .8
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Sound Features . . . . . . . . . . . . . . . .9
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . .9
Bass Boost and Equalizer . . . . . . . . . . . . . . . . . .9
mp3 Player . . . . . . . . . . . . . . . . . . .22
Turn On/Off the Player . . . . . . . . . . . . . . . . . . .23
Playback Controls . . . . . . . . . . . . . . . . . . . . . . .23
Adjusting the Volume . . . . . . . . . . . . . . . . . . .24
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Play modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Frequently Asked Questions . . . . . . . . . . . . . .24
Note:
1. AUX IN.
2. Main Speaker terminal tabs.
3. AM Loop antenna Jacks.
4. FM Pigtail Antenna.
CD and mp3 Disc Playback . . . . . . .10
Play / Pause Discs . . . . . . . . . . . . . . . . . . . . . . . .11
Stop and Searching Through a CD . . . . . . . . .12
Make sure the tracks are encoded in mp3
or Windows Media formats and supported
bitrates. Bitrates supported by the player:
mp3 – 32 to 320kbps
wma - 48 to 160kpbs
USB and mp3 player . . . . . . . . . . . .13
Connecting USB device to the Main Unit . . .13
Connecting / Disconnecting mp3 Player to the
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Selecting USB or mp3 player Mode . . . . . . . .14
Memory Usage . . . . . . . . . . . . . . . . . . . . . . . . .14
Troubleshooting Tips . . . . . . . . . . .25
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
mp3 Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Maintenance . . . . . . . . . . . . . . . . .27
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Handling CDs . . . . . . . . . . . . . . . . . . . . . . . . . . .27
CD Lens Care . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Technical Specification . . . . . . . . . . . . . . . . . . .27
Radio . . . . . . . . . . . . . . . . . . . . . . .15
Selecting Tuner Band . . . . . . . . . . . . . . . . . . . .15
Tuning to a Station . . . . . . . . . . . . . . . . . . . . . .15
Using Presets . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Auto Preset Programming . . . . . . . . . . . . . . . .15
Manually Setting Presets . . . . . . . . . . . . . . . . .15
Warranty . . . . . . . . . . . . . . . . . . . .28
2
1
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 10
Getting Started
General Controls
SOURCE - Selects among CD player, tuner, USB,
mp3 player and AUX.
Using the FM and AM Antennas
EN
Installation
To ensure sufficient ventilation, keep the spacings
Main Unit - Front View
EN
Before you use your audio system, you’ll want to
make sure both the FM and AM antennas are
positioned properly. Uncoil the FM antenna at
the back of the unit, making sure it is fully
extended (you may even want to tape it to the
wall behind the unit if possible. The higher the
better.) You’ll also need to connect the AM
antenna loop to the back of the unit if you listen
to AM stations. Rotate the AM loop antenna for
better reception.
BAND/INFO - In CD mode - Selects display
options to show track elapse time, track remain
time or disc remain time.
In mp3 / WMA mode - Shows ID3 tag.
In USB / mp3 player mode - Shows memory usage.
In Tuner mode - selects radio band.
shown below free from other surfaces:
R S 2 0 5 0
Sleep
DEMO/DIMMER
Front View
10 cm
10 cm
ON/
STANDBY
CD
R
S
2
0
5
0
Sleep
DEMO/DIMMER
ON/
STANDBY
CD
REC
USB - Starts and stops record to USB
mp3 player
10 cm
SOURCE
R
E
C
U
S
B
REC POR
TABLE PLAYER
device.
REC
mp3 player
BAND/INFO
BACK
SELECT
TUNE/PRESET
PORTABLE PLAYER - Starts and stops
PHONES
USB
REC PORTABLE PLAYER
SOURCE
REC
record to mp3 player.
BACK - In navigation mode - navigates
backwards.
In rename mode - edits previous alphabet
SELECT - In mp3 / WMA / USB stop mode - Enters
navigation mode.
In navigation mode - navigates forward.
In rename mode - confirms the editing alphabet
(PLAY/PAUSE) - Starts and pauses playback
for CD, USB and mp3 player.
BAND/INFO
BACK
SELECT
TUNE/PRESET
D
I
G
I
T
A
L
M
U
S
I
C
S
T
U
D
I
O
CD-R
/
R
W
C
O
M
P
A
T
I
B
L
E
mp3
Connecting the Speakers
PHONES
Speaker terminal tabs marked L are for left while
R are for right. Each speaker has a black
(negative) and a red (positive) wire. When
connecting the speakers, match the red wires to
the red jacks and the black wires to the black
jacks.
Side View
5 cm
10 cm
D
I
G
I
T
A
L
M
U
S
I
C
S
T
U
D
I
O
TUNE/PRESET - Stops CD, USB and mp3 player
In record mode - stops recording.
In Tuner mode - selects tune or preset mode.
(SKIP FORWARD) - In CD mode - Goes to
the next CD track and setting options; searches
forward through CD;
In USB and mp3 player mode - Skips to the next
file;
In Tuner mode - Tunes up radio frequency.
(SKIP BACKWARD) - In CD mode - Goes to
the previous CD track and setting options;
searches backward through CD;
Speaker Wire Connection
CD-R RW COMPATIBLE
/
mp3
ON/STANDBY - Press briefly to turn on and off
the unit.
DEMO/DIMMER - Activates and deactivates
demonstration.
Push Speaker terminal tab
Release tab to lock wire in
down to insert wire.
the terminal.
NOTE: Make sure the insulation
is completely removed from the
speaker wires at all connection points.
ends of the
In USB and mp3 player mode - Skips to the
previous file;
Tips:
In Tuner mode - Tunes down radio frequency.
In STANDBY mode, press ON/STANDBY to
turn the system on in the previously used
mode. Press SOURCE to select the
corresponding mode. Look at the display icons
to identify the current mode.
4
3
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 12
General Controls
General Controls
(LEFT/BACK) - In navigation mode - Navigates
backwards.
INTRO - In CD / USB and mp3 player mode - Turns
intro mode on or off to play the first 10 seconds
of each track / file.
CLOCK - Displays clock time. Press and hold to
enter clock setting mode.
ADD - In CD / USB / mp3 player mode - Adds
track / file to Program List.
- In CD / USB / mp3 player mode - Turns on/off
random playback.
TIMER - Enters timer setting mode. Activates and
deactivates timer.
DEL - When reviewing program, removes track /
file from Program List.
In USB / mp3 player mode - Removes file from the
connected mp3 player.
- Opens or closes the disc tray.
VOLUME CONTROL - Adjusts volume (except in
navigation mode).
In mp3 / WMA / USB navigation mode - Rotate
clockwise to navigate downwards and rotate
counter-clockwise to navigate upwards.
PHONES - Jack for connecting headphones
USB socket - connects USB devices
EN
Remote Control
EN
(RIGHT /ENTER) - Enters navigation mode
form mp3 / WMA / USB stop mode.
In navigation mode - Navigates forward.
BAND - In Tuner mode - selects radio band.
B. BOOST - Turns on or off Bass Boost.
FM ST - Selects between stereo and mono sound
in FM tuner mode.
EQ - Selects equalizer presets.
DEMO/DIMMER - Activates and deactivates
demonstration.
Adjusts the brightness of display.
CD INFO - In CD mode - Selects display options
to show track elapse time, track remain time or
disc remain time.
In mp3 / WMA mode - Shows ID3 tag.
In USB / memory card mode - Shows memory
usage.
ON
SOURCE
STANDBY
mp3 player
- connects mp3 player
BAND
FM ST
B.BOOST
EQ
DEMO/DIMMER
CD INFO
Note:
Refer to “mp3 Player” section on page 22-
24 for mp3 player operation details.
VOL
In rename mode - deletes current alphabet
REPEAT - In CD mode - Repeats a track or CD.
In USB / mp3 player mode - Repeats one file or
repeats all files.
SLEEP - Selects the time interval in minutes
before the unit turns off.
REC
USB
REC
- Mutes audio output.
PLAYER
VOL
or
- Decreases or Increases volume
PROG
ADD
DEL
INTRO
REPEAT
CLOCK
TIMER
SLEEP
level.
(SKIP BACKWARD) - In clock and timer
setting mode - Goes to the previous setting
option. In CD / USB / mp3 player mode - Goes to
the previous track; searches backward through
CD;
R S 2 0 5 0
In Tuner mode - Tunes down radio frequency.
(PLAY/PAUSE) - In CD / USB / mp3 player
mode - Starts and pauses playback.
ON/STANDBY - Press briefly to turn on and off
the unit.
SOURCE - Selects among CD player, tuner, USB,
mp3 player, and AUX.
(UP)- In navigation mode - Navigates
upwards and move up a list.
(SKIP FORWARD) - In clock and timer
setting mode - Goes to the next setting option. In
CD / USB / mp3 player mode - Goes to the next
track; searches forward through CD;
In Tuner mode - Tunes up radio frequency.
REC
USB - Starts and stops record to USB
In tuner mode - selects the next preset number.
In rename mode - selects alphabets
(DOWN)- In navigation mode - Navigates
downwards and move down a list.
In tuner mode - Selects the previous preset
number.
device.
REC
player.
PLAYER - Starts and stops record to mp3
TUNE/PRESET (STOP) - In TUNER mode -
Selects tune or preset mode.
In CD / USB / mp3 player mode - Stops playback;
In record mode - stops recording.
In rename mode - selects alphabets
PROG - In CD, USB, mp3 player and Tuner mode -
Enters program mode.
In navigation mode - enters rename mode and
store new file names
6
5
RS2050 EN 23/1/06 3:05 PM Page 14
General Controls
Settings
4. Press TIMER to change to Timer Off setting
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
Installing Batteries
EN
Showing Demonstration
Press DEMO/DIMMER to turn on/off
demonstration mode. The demonstration scrolls
through all display operations.
EN
The remote control must be inserted with 2
"AAA" or "UM-4" or "R03" batteries prior to use.
Follow the steps below to ensure correct
installation.
1. Open the battery compartment door by
pressing down on the tab and then lifting the
door out.
2. Insert “AAA”(UM4) batteries in the
compartment.
3. Replace the battery compartment door in
place.
OFF
0:00
Setting the Clock
1. Press and hold CLOCK on the remote control
5. Press TIMER to select source. Press
or
until the hour flashes on the display.
to select TUNER / REC TUNER / DISC / USB /
PLAYER.
2. Press
press CLOCK to shift to minute digits.
3. Press or to set the minute.
or
to set the hour and then
If TUNER REC is selected, press
to select the preset station.
or
4. Press CLOCK twice to save and quit settings.
PRE 01
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
Display
6. Press TIMER to set volume. Adjust VOLUME
CONTROL to select desired volume level.
VOL 10
Program - In program mode.
Repeat 1 / Repeat ALL - Indicates the repeat
option that is activated.
Repeat 1 - Repeats current track.
Repeat All - Repeats all the tracks.
Intro - Intro is activated so the first 10 seconds of
each track will be played.
Sleep
mp3 Repeat 1
WMA
Jazz Classic Rock Custom
All Intro
Program B.Boost
Setting the Timer
1. Press and hold TIMER on the remote control
until Timer On and the clock hour flashes on
the display.
7. Press TIMER to save and quit settings.
CDUSB
AUX REC mp3 Player Stereo RDS
Tuner
The timer is automatically activated once timer
setting is saved.
ON
Jazz / Classic / Rock / Custom - Current
equalizer setting.
B.Boost - Bass boost is activated.
- Random playback is activated in CD mode.
Sleep - Sleep is activated.
- Timer is activated.
- Currently in playback mode.
II - Currently in pause mode.
2:00
Activating the Timer
Press and release TIMER to turn on/off the alarm.
CD / Tuner / USB / mp3 player / AUX - indicates
the current mode.
REC - Recording is activated.
Stereo - In FM tuner mode, indicates stereo
sound is selected.
- Folder in navigation mode.
- Track in navigation mode.
mp3 / WMA - Current CD format.
2. For setting time, press
hour and then press TIMER to shift to minute
or
to set the
The timer icon
activated.
is displayed when timer is
digits.
3. Press
or
to set the minute.
8
7
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 16
Settings
CD and mp3 Disc Playback
Adjust Sleep Time
Press SLEEP again when the remaining sleep time
is displayed to change sleep time.
EN Sleep Mode
Important CD and mp3/WMA
EN
Notes on mp3/WMA Disc:
Information
You can select the time interval in minutes before
the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep
mode is activated.
•
Use .mp3 as the extension when converting
audio files into mp3 for saving onto
CD-R(W) or CD-ROM, e.g. Abc08.mp3.
Do not use any other extension e.g. .doc,
.pdf.
• Do not use the .mp3 extension for other
text or non-audio data files as this may
result in serious malfunction and harmful
noise interference.
• For better quality in mp3/WMA disc
playback, the CD quality should be
recorded 128kbps or above.
Disc data size > 650MB is not
recommended.
Total files and folders in the disc should
not exceed 250, it also depends on the
length of the file/folder names.
For mixed mode discs, only one mode will
be selected for playback depending on the
recording format.
To ensure good performance, wait until
the disc changer completely reads the disc
before proceeding.
mp3 files in CD ROM EXTRA format disc
cannot be recognized.
CD-R / RW
This unit is compatible with
CD-RW/ CD-R discs for
playback.
Note:
Sleep is automatically de-activated when
the unit is turned off.
Notes on CD-R/RW Disc:
View Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time.
•
Do not affix any type of labels to either
side (recordable or labeled side) of a
CD-R/RW disc as this may result in the
unit malfunctioning.
•
• To avoid damages to the CD-R/RW disc, do
not open the disc compartment door while
the disc is being read.
• Do not load an unrecorded CD-R/RW disc
into the unit. This may take a longer time
to read the disc.
• Playback capability for CD-RW discs
may vary due to variations in the
quality of the CD-RW disc and the
recorder used to create the disc.
•
Sound Features
•
•
•
Volume Control
Rotate the volume control on the main unit or
Using Preset Equalizer Curves
Press EQ to toggle among FLAT, JAZZ, CLASSIC,
ROCK, and CUSTOM. The display shows your
selection briefly and the relative icon lights on
the display.
press VOL
or
on the remote control to
adjust volume level. The volume level shows
briefly on the display.
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press
to cycle among displayed bass and treble
range levels.
3. While BAS and TRE is displayed, adjust volume
control to set the associated gain between
-10 - +10.
Bass Boost
Press B.BOOST to turn on/off boosting the bass
frequency. The B.Boost icon lights on the display
when it is activated.
or
Muting Audio
4. Press EQ to exit.
Press
on the remote to cut the sound
(Remote Only). MUTE flashes on the display.
or
EQ
BAS +08
EQ
TRE +02
10
9
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 18
CD and mp3 Disc Playback
CD and mp3 Disc Playback
EN Loading Discs
Play and Pause Disc
Stop Playback
Searching Through a CD
EN
1. Press SOURCE repeatedly to select CD mode.
• To play disc in the disc compartment,
During playback, press
The unit returns to navigation mode briefly
(approx. 10 seconds) before entering stop mode.
to stop playback.
• Press
next track.
• Press and hold
/
to skip to the previous or
2. Press OPEN/CLOSE
to open the disc
- press
in stop mode to begin playback.
compartment.
3. Insert disc with label facing up.
• During mp3 / WMA playback, the display show
ID3 tags (Title, Artist and Album).
/
to search through
a CD while it is playing.
4. Press OPEN/CLOSE
again to close the disc
Navigation mode:
compartment.
Audio CD
mp3 / WMA CD
If the disc is a mp3 / WMA CD, the respective MP3
and WMA icon lights on the display during
playback.
Audio CD
mp3 / WMA CD
Tips:
00:48
02
0:01
0:00
TRACK 01
FOLDERS
In CD stop mode, press
navigation mode and show disc menu.
to enter
TRACK 01
ID3 tag
In CD navigation mode, press
to return to stop mode.
• Press
during playback to
Stop mode:
Note:
pause disc. Press again to resume.
Audio CD
mp3 / WMA CD
Be sure to remove disc from the disc
compartment before moving or transporting
the unit!
43:55
184
TOTAL 12
TRACKS
Attention:
Do not push to force closing of the tray
during CD playback or tray opening.
12
11
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 20
USB and mp3 player
USB and mp3 player
The playback controls of USB devices and mp3
player are basically the same. Connect the devices
first before starting playback.
EN
Disconnecting the mp3 player
Selecting USB or mp3 player
Mode
Press SOURCE repeatedly to select USB or mp3
player mode.
Skipping Files
EN
•
Press
/
to skip to the previous or
to search through
from the Main Unit
next file.
• Press and hold
Press eject button on the right side of the unit to
disconnect the player from the Audio System.
/
Connecting USB devices to the
Main Unit
a file while it is playing.
Insert the USB port of the USB device you want to
connect into the USB connector of the main unit.
Unplug the device to disconnect.
USB / mp3 player Playback
Features
Start and Pause Playback
Memory Usage
Press BAND/INFO on the main unit or CD/INFO
on remote to view memory usage on the USB
device or the mp3 player.
Connecting the mp3 Player to the
Main Unit
Press PLAY / PAUSE
to start or pause
playback.
1. Press and hold the lock button on the back of
the player and push the USB connector out
from the player.
MP3
Press to
disconnect player
PLAYER
PUSH
EJECT
Stop Playback
Press
to stop playback operations.
2. Insert the USB port of the mp3 player into the
USB connector for the player of the main unit.
Side View
The unit enters navigation mode for 10 seconds
before entering stop mode.
Stop Mode
Navigation Mode
R
S
2
0
5
0
02
02
Sleep
DEMO/DIMMER
ON/
STANDBY
CD
TRACKS
FOLDERS
Insert mp3 player here
mp3 player
SOURCE
R
E
C
U
S
B
REC PORTABLE PLAYER
mp3
BAND/INFO
BACK
SELECT
TUNE/PRESET
player
eject
PHONES
button
Tips:
Insert USB device here
D
I
G
I
T
A
L
M
U
S
I
C
S
T
U
D
I
O
In stop mode, press
(RIGHT / ENTER)
CD-R
/
RW COMPATIBLE
mp3
to enter navigation mode and show disc menu.
In navigation mode, press
to return to stop mode.
(LEFT / BACK)
14
13
RS2050 EN 23/1/06 3:16 PM Page 22
Recording
Radio
Recording to mp3 player or USB device are
basically the same. You can record CD, Tuner or
AUX files to the mp3 player or USB device.
Auto Preset Programming
(FM only)
EN Selecting Tuner Band
EN
Tips:
1. Press SOURCE to enter Tuner mode.
2. Press BAND/ INFO to select between FM MW
or LW Radio band.
Press and hold the BAND/ INFO button for 2
seconds to scan stations in FM band. The stations
will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is
automatic upon pressing the button. You can
stop the automatic scan by pressing any button,
but the erased stations cannot be recovered.
If CD playback is already started,
recording will begin instantly when REC
PORTABLE PLAYER is pressed.
Recording CD to mp3 Player
Recording Standby
1. Connect the mp3 player to the USB port, “USB
Connected” will show on the display.
2. In CD stop mode, CD navigation mode or CD
Tuning to a Station
If CD playback is stopped, playback and
recording will start instantly when REC
PORTABLE PLAYER is pressed.
Press
or
to select frequencies. Press
and hold
or
to scan frequencies.
pause mode, press REC
PORTABLE
PLAYER.
3. Press
to start CD playback and recording
will begin. This is indicated by the REC
mp3Player icon on the display.
Using Presets
FM
Tips:
AUTO
The tuner can be in either TUNE or PRESET mode.
• Press to toggle TUNE and PRESET
mode until “Program” lights on the display.
4. Press
to stop recording.
Recording
Recording stops automatically when
CD stops (Example: end of disc is reached).
Manually Setting Presets
• Press
or
to access the previous or
0:20
next preset station.
1. Press the
mode.
2. Press
button to enter TUNE
SONG NAME
Recording Tuner / AUX to mp3
player
Instant Recording
1. In Tuner or AUX mode, press REC
PORTABLE PLAYER to start recording.
Recording
or to access the desired
Program
FM02
Example
frequency.
3. Press the PROG button once and the most
recently accessed program location flashes on
the display.
91.10MHZ
(To record only selected tracks from a CD):
1. Create a CD program by following instructions
under “Setting Up a Program List” on page 18.
2. In CD stop mode or navigation mode, press
P:02
FM
Tips:
Under PRESET mode, press
can only acess the preset stations. Manaully
tuning is not accessible in this mode.
REC
PORTABLE PLAYER.
91.10MHZ
91.10MHZ
3. From normal playback mode, press PROG to
enter program play mode. Playback and
recording begins automatically. The Prog
icon lights and REC mp3Player icon
flashes on the display.
or
Example
4. If a different program location is preferred,
1. In radio mode, select the station to record
(refer to page 15 for details).
press
or
to move to the desired
4. Press
or REC
PORTABLE PLAYER to
preset number (1-32).
5. Press PROG to store the selected frequency at
that preset.
stop recording.
2. Press REC
PORTABLE PLAYER to start
recording.
Instant Recording
3. Press
or REC PORTABLE PLAYER to
stop recording.
1. In CD playback mode, press REC
PORTABLE PLAYER to start recording. REC
mp3Player icon flashes on the display.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and
stereo mode. (Remote Only) “STEREO” is
displayed in stereo mode.
Note:
The encoding bitrate for tuner, CD
and AUX signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
16
15
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 24
Advanced Playback Controls
Recording
In CD / USB / mp3 mode, advanced playback
controls allow you to sample, repeat and radom
playback files, set up a Program List. In mp3 /
WMA / USB mode, allow you to rename tracks.
Program Recording
Recording to USB Device
Follow the steps of “Recording CD / Tuner /
EN
Setting Up a Program List
1. In navigation mode, use the navigation
controls to select the track to add to Program
List.
2. Press ADD to save the selected track into the
next available program location.
3. Repeat steps 1 to 3 to store more tracks into
program memory.
EN
Use Program Recording to preset the unit to
record your favorite radio program.
1. Press and hold TIMER on the remote control
until Timer On and the clock hour flashes on
the display.
AUX to mp3 player” in the last section by
pressing REC
USB instead of REC
PORTABLE PLAYER. REC USB will flashes on the
display while recording.
Sampling Files
Press INTRO on the remote control to play the
first 10 seconds of each track/file.
INTRO is displayed when sampling is activated.
Press INTRO again to turn intro mode off.
2. For setting time, press
or
to set
the hour and then press TIMER to shift to
minute digits.
Tips:
3. Press
or
to set the minute.
Make sure “write protect” is turned
off in the USB device during
recording.
4. Press TIMER to change to Timer Off setting
with clock time flashing. Repeat steps 2 & 3 or
timer off time setting.
P:02
Repeat
ADD TO
5. Press TIMER repeatedly to select REC TUNER.
Press REPEAT on the remote control to toggle
repeat options:
6. Press
station.
or
to select the preset
Repeat the current file (Repeat 1),
Repeat all the tracks (Repeat All), or
Normal playback.
Deleting Files from mp3
Player/USB device
7. Press TIMER to set volume. Adjust VOLUME
CONTROL to select desired volume level.
8. Press TIMER to save and quit settings.
The timer is automatically activated once timer
setting is saved. Recording will start at the
preset time.
1. In navigation mode, select the file to delete
using the navigation buttons (Refer to
“Navigation Controls” for details.)
Tips:
Random Playback
You can create a program of up to 32 tracks.
Press
on the remote control to turn on/off
random playback.
activated.
icon is displayed when it is
SONG01
Tips:
Tips:
To view elapsed recording time and
remaining time, press BAND/INFO on
the main unit or CD INFO on the remote in
recording mode.
2. Press DEL on the remote control.
DEL
In CD stop mode, press PROG to toggle
between program mode and normal mode.
YES
NO
*
Elapsed
3. Rotate the Volume button on the main unit or
press or on the remote
control to select Yes to delete or No to cancel.
0:22
recording
time
Remaining
Time
146:14
Note:
4. Press SELECT on the main unit or
on the
remote control to confirm selection.
Each source mode has an individual Program
List.
04
TRACKS
Deleting All Files
In navigation mode, press and hold DEL on the
remote control to delete all the files on the mp3
player.
18
17
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 26
Advanced Navigation Controls
Advanced Playback Controls
Remote Control
Playing a Program List
While in PROGRAM stop mode , press
If you are not currently in program mode, press
PROG to enter program mode. Program playback
begins automatically.
Rename Tracks
You can rename tracks in USB device or mp3
player.
EN
File Navigation
Main Unit
EN
.
ON
SOURCE
STANDBY
1. In mp3 / WMA / USB navigation mode, press
PROG on the remote control to enter rename
mode.
BAND
FM ST
B.BOOST
EQ
mp3 player
DEMO/DIMMER
Display Program List
2. Press
or
to select alphabets.
USB
PORTABLE PLAYER
SOURCE
REC
REC
CD INFO
3. Press SELECT to confirm the current alphabet
and move to the next alphabet.
4. Press PROG to confirm and store the new file
name after editing the last alphabet.
1. While the CD player is stopped, press
PROG to enter PROGRAM mode. Program
playback begins automatically after entering
program mode.
BAND/INFO
BACK
SELECT
TUNE/PRESET
VOL
5. Press BACK to edit the previous alphabet.
6. Press DELETE to delete the alphabet.
To display program list, press
.
PHONES
REC
USB
REC
PLAYER
PROG 30
PROG
INTRO
REPEAT
CLOCK
TIMER
SLEEP
2. Press
/
repeatedly to view
each track assignment in the program list.
D
I
G
I
T
A
L
M
U
S
I
C
S
T
U
D
I
O
R S 2 0 5 0
Deleting from Program List
1. While in PROGRAM mode, press
select the program to delete.
2. Press DEL.
/
to
(LEFT / BACK)- Navigates backwards.
Returns to the previous navigation menu level.
Returns to stop mode from navigation mode.
(RIGHT / ENTER)- Navigates forward.
Enters navigation mode from mp3 / WMA / USB
stop mode.
Enters current folder and shows the first
file/folder from current folder.
(UP) - Navigates upwards.
Enters navigation mode from mp3 / WMA / USB /
memory card stop mode.
Selects previous file/folder on the navigation
menu.
(DOWN)- Navigates downwards.
Enters navigation mode from mp3 / WMA / USB
stop mode.
Selects next file/folder from the navigation menu.
ADD - In mp3 / WMA / USB navigation mode -
adds the selected file into Program List.
DEL - When reviewing program, removes the
selected file from Program List.
SELECT - Enters navigation mode from mp3 /
WMA / USB stop mode.
Enters selected folder in navigation mode.
Begins playback of the selected file in navigation
mode.
BACK - Goes back up one level in navigation
mode; returns to stop mode from navigation
mode when at root level.
3. Press
No and Yes.
4. Press to confirm selection.
/
to select between
Deleting the Entire Program List
1. While in PROGRAM mode, press
to select the program to delete.
2. Press and hold DEL.
/
REC
USB - Starts and stops record to USB
device.
REC
PORTABLE PLAYER - Starts and stops
record to mp3 player.
Volume Control - Rotate clockwise to navigate
downwards.
Rotate counter-clockwise to navigate upwards.
In USB / mp3 mode - Deletes selected file.
20
19
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 28
Advanced Navigation Controls
mp3 Player
Insert battery into the player
1. Slide the battery door by following the
EN
EN
Note:
Tips on Playback Sequence of Disc
direction of arrow.
This unit may temporarily cease to function
if subjected to electrostatic disturbance.
To resume normal operation, it may be
necessary to cycle the power off and back
on or to remove and reinstall the batteries.
•
•
Check that the mp3/WMA disc is created with a single folder structure. Refer to the
diagram below for playback sequence details on multi-level folder structure.
For example, folders and songs from level 2 are played before moving on to play
folders and songs from level 3.
2. Insert a “AAA”(UM4) battery with polarities
corresponding to the indications in the
compartment.
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
A
D
3. Replace the door to the battery compartment.
8
9
Folder 1.1
Song 1.1.1
Song 1.1.2
Folder 1
10 Song 1.1.3
E
F
G
General Controls
13
Song 1.2.1.1
Folder 1.2.1
Folder 1.2
Folder 2.1
14 Song 1.2.1.2
Song 1.2.1.3
15
B
11
Song 2.1.1
Song 2.1.2
Folder 2
12
3
4
5
Song 2.2
Song 2.3
Song 2.4
C
- Press once to turns the unit on. In play
mode, press once to starts and pause music
playback.
- In stop mode, press once to turn off the
unit. Press once to stop music playback.
- Skips to the previous song or the
beginning of the current song. Press and hold to
scan backwards.
USB lock button - Press and hold and push the
USB connector out form the unit.
VOL + / - - Increases and decreases the volume
level.
M - Selects among playback options. (repeat one,
repeat all, random playback, repeat random
playback)
6
7
Song 3.1
Song 3.2
Folder 3
1
2
Song 4
Song 5
DSP - Selects among DSP modes (Flat, Bass, Pop,
Rock, Jazz)
-Skips to the next song. Press and hold to
scan forward.
Note:
LOCK - Slide the switch to lock or unlick the keys
of the player
Headphones Jack - Insert headphones here.
(USB port) - Use the USB port to connect to
the Audio System.
•
•
Folder playback sequence is indicated by the letters A to G.
Song playback sequence is indicated by the numbers (1 to 15) in front of the song name.
22
21
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 30
mp3 Player
mp3 Player
EN Display Overview
Stop Playback
Adjusting the Volume
DSP
EN
1. Shows current volume level.
• During playback, press
The total number of tracks is display.
• Press in stop mode to turn the unit off.
to stop playback.
Press VOL +/- to adjust the volume.
Press the DSP button repeatedly to select among
DSP modes:
FLAT > BASS > POP > ROCK > JAZZ
The current selection shows briefly on the display.
Key Lock
• To avoid accidental key activation, slide the key
4
3
5
2
1
Skipping Tracks
• To skip to the next track, press and release the
lock switch to the left.
The Lock icon
can be seen on display.
0 0 1 0 0 : 2 8
• Slide to the switch to the right to unlock.
D S P
F L AT
button.
• To go to the previous track, press and release
the
button.
Play modes
2. The relative play mode indicator lights
to show current selection.
- repeat track
During playback, press M repeatedly to select
among the following playback modes:
Normal playback
Note:
Scan Tracks
•To scan backwards in the track that is playing,
press and hold the
•To scan forwards in the track that is playing,
When the unit is in off mode and the key
lock switch is at the LOCK position,
pressing the PLAY / ON key will cause the
display to show the key lock icon for three
seconds.
- repeat all
- random playback
Repeat Track -
Repeat All -
Random Playback -
Repeat Random Playback -
button.
- repeat random playback
press and hold the
button.
3.
4.
is displayed when the
key lock function is activated.
shows the battery level.
Note:
5. This section shows song information.
If the elapsed time of the playing track is
less than 0:04, pressing Skip backward once
will return to previous track.
The information in this section presumes you’ve
successfully transferred files to the mp3 player,
and you’re ready to play some music.
If the elapsed time of the playing track is
more than 0:04, pressing Skip backward
once will return to the beginning of the
current track.
Turn On/Off the mp3 player
Press
to turn the unit on/off. Playback starts
automatically from the first track.
Play / Pause
•
In stop mode, press
to start playback of
selected track. Current track number, elapsed
playback time and track title show on display.
Check for Updates
Frequently Asked Questions
and firmware upgrades for our Lyra Digital Audio
Player. You must update your system after new
downloads have been made in order for the new
applications to be executed.
lyra.com
• To pause playback, press
during
playback. Press
playback.
again to resume
001 00:28
SONG NAME
24
23
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 32
Troubleshooting Tips
Troubleshooting Tips
EN Main Unit
mp3 Player
EN
Problem Solution
Problem Solution
Problem Solution
Problem Solution
The player • Battery may be inserted
USB display • Check connection between
does not
turn on
when
PLAY
button
pressed.
incorrectly. (Refer to P.23)
• Battery may be empty.
does not
appear
when
connected
to
your unit and the computer.
System will • Check power cord for a secure
CD sound
skips
• Clean the disc.(Refer to P.28)
not turn
on
connection.
• Check disc for warping,
scratches, or other damage.
• Check if something is causing
the system to vibrate. If so,
move the system.
• Make sure the speakers are at
least 3 feet away or on a
different surface from the
main unit.
• Unplug the unit for a moment,
and then plug into power
source again.
computer.
• Check the outlet by plugging in
another device.
Skipping
tracks or
• Repeat or random function may
be activated. (Refer to P.25)
The player
does not
respond to
key
• To reset the unit, turn the
player off by removing the
battery. Reinsert the battery
properly and turn the player
on again to resume normal
operations. (Refer to P.23)
No sound
• Increase the volume setting.
(Refer to P.9)
bad sound • There may be strong magnetic
quality?
fields (e.g. too close to TV) near
the unit.
• Low Battery level. Replace with
new one.(Refer to P.23)
• Check connection to speakers.
(Refer to P.3)
• Check that you have selected
the appropriate function: CD,
Tuner.(Refer to P.4)
• Make sure mute is off.
• Make sure headphones are not
plugged in.
operations?
Remote
control
does not
work
• Check that the batteries are
properly installed.(Refer to
P.7)
• Replace weak batteries.
• Check the system is plugged
into power source.
• Point the remote directly at
the system’s front panel.
• Move closer to the system.
• Remove any obstacles
between the remote and the
system.
Cannot
perform
playback?
• LOCK function may be
activated.(Refer to P.25)
• There may be no mp3 tracks in
the card or internal memory.
• Memory Card may be damaged.
Poor radio • Check antenna
reception
connection.(Refer to P.3)
• Move antenna.
Cannot
• Make sure audio tracks are
encoded in the mp3 or
Windows Media formats at
supported bitrates.
Bitrates support by the player:
mp3 – 32 to 320 kbps
wma – 48 to 160 kbps
• WMA files may be DRM
protected and you don’t have
the proper rights (license) to
play the files.
• Turn off nearby electrical
appliances, such as hair dryer,
vacuum cleaner, microwave,
fluorescent lights.
playback
tracks on
the player.
CD does
not play
• Check that CD is in the
tray.(Refer to P.11)
• Check that CD label is facing
up.(Refer to P.11)
• Check that PAUSE mode is not
on.(Refer to P.11)
Note:
Check the website and/or
application help system of the
music download service provider
from where the content was
purchased from for license
acquisition details.
For more information on how
license acquisition works, go to
• Check that CD function is
selected.(Refer to P.4)
• Use CD lens cleaner.(Refer to
P.28)
• Clean the disc.(Refer to P.28)
• Try another CD.
• Switch to another function
(Tuner) then back
to CD. (Refer to P.4)
This unit may temporarily cease to
function if subjected to electrostatic
disturbance. To resume normal
operation, it may be necessary to cycle
the power off and back on or to remove
and reinstall the batteries.
26
25
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 34
Maintenance
Limited Warranty (U.S.)
Disconnect the audio system from the power
source before performing any maintenance.
What your warranty covers:
• Defects in materials or workmanship.
EN
CD Lens Care
EN
When your CD lens gets dirty it can also cause the
system to output poor sound quality. To clean the
lens you will need to purchase a CD lens cleaner
which can maintain the output sound quality of
your system. For instructions on cleaning the CD
lens, refer to the ones accompanying the lens
cleaner.
For how long after your purchase:
• One year from date of purchase for labor and parts
• Warranty period for rental units begins with the first rental or 45 days from date of shipment to the
rental firm, whichever comes first.
Cleaning
Clean the exterior of the system using a soft dust
cloth.
What we will do:
CD Player
CAUTION! This system operates with a laser. It
• Pay any Authorized RCA Audio Service Center the labor charges to repair your unit.
• Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished
replacement parts required to repair your unit.
Technical Specification
Power supply: 120V~60Hz
must be opened by only a qualified technician.
Dimensions ( H x W x D mm):
Unit size - 214 x 152 x 229
Speaker - 243 x 150 x 195
CD player: Response curve (+/- 2dB): 60Hz to 5kHz
Rating Plate: Look for it at the back of the set.
Maximum size of Mass Storage Class device
supported: 20GB
How you get service:
Handling CDs
•
Take your unit to any Authorized RCA Audio Service Center. To identify your nearest Authorized
RCA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
Show the Authorized Service Center Representative your evidence of purchase date or first rental.
• Do not touch the signal surfaces. Hold CDs by
the edges, or by one edge and the hole.
• Do not affix labels or adhesive tapes to the
label surfaces.
•
• Pick up your unit when repairs are completed.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product
is within the warranty period must be presented to obtain warranty service. For rental firms, proof
of first rental is also required.
• Do not scratch or damage the label.
CDs rotate at high speeds inside the player.
• Do not use damaged (cracked or warped) CDs
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit.
Any additional information should be obtained from your dealer.)
• Installation and related adjustments.
• Signal reception problems not caused by your unit.
• Damage from misuse or neglect.
• Cleaning of audio heads.
• Batteries.
• A unit that has been modified or incorporated into other products or is used for institutional or
other commercial purposes.
• A unit purchased or serviced outside the U.S.A.
• Acts of nature, such as but not limited to lightning damage.
Cleaning CDs
• Dirty CDs can cause poor sound quality. Always
keep CDs clean by wiping them gently with a
soft cloth from the inner edge toward the
outer perimeter.
• If a CD becomes dirty, wet a soft cloth in water,
wring it out well, wipe the dirt away gently,
and then remove any water drops with a dry
cloth.
• Do not use record cleaning sprays or antistatic
agents on CDs. Also, never clean CDs with
benzene, thinner, or other volatile solvents
which may cause damage to disc surface
Product Registration:
• Please complete and mail the Product Registration Card packed with your product. It will make it
easier to contact you should it ever be necessary. The return of the card is not required for warranty
coverage.
28
27
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 36
Limited Warranty (Canada)
Limited Warranty (U.S.)
What your warranty covers:
• Defects in materials or workmanship.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL
EN
EN
OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO
VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON INC., ITS AGENTS OR EMPLOYEES
SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY
OF THE CONSUMER. THOMSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF
ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER
OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF
INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
For how long after your purchase:
• One year from date of purchase for labor and parts
• The warranty period for rental units begins with the first rental or 45 days from date of shipment to
the rental firm, whichever comes first.
What we will do:
• Pay any Authorized RCA Audio Service Center the labor charges to repair your unit.
• Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished
replacement parts required to repair your unit.
How you get service:
• Take your unit to any Authorized RCA Audio Service Center. To identify your nearest Authorized
RCA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
• Show the Authorized Service Center Representative your evidence of purchase date or first rental.
• Pick up your unit when repairs are completed.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product
is within the warranty period must be presented to obtain warranty service. For rental firms, proof
of first rental is also required.
How State Law relates to warranty:
• Some states do not allow the exclusion nor limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not
apply to you.
• This warranty gives you specific legal rights, and you also may have other rights that vary from state
to state.
What your warranty does not cover:
If you purchased your unit outside the United States:
• This warranty does not apply. Contact your dealer for warranty information.
• Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit.
Any additional information should be obtained from your dealer.)
• Installation and related adjustments.
• Signal reception problems not caused by your unit.
• Damage from misuse or neglect.
• Cleaning of audio heads.
Service calls which do not involve defective materials or workmanship are not covered by
this warranty. Costs of such service calls are the sole responsibility of the purchaser.
• Batteries.
• A unit that has been modified or incorporated into other products or is used for institutional or
other commercial purposes.
• A unit purchased or serviced outside Canada.
• Acts of nature, such as but not limited to lightning damage.
Product Registration:
• Please complete and mail the Product Registration Card packed with your product. It will make it
easier to contact you should it ever be necessary. The return of the card is not required for warranty
coverage.
30
29
2050_fr_CS196 final_EN 16/1/06 5:35 PM Page 38
Limited Warranty (Canada)
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO
EN
VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON MULTIMEDIA LTD., ITS AGENTS OR
EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS
WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY
OF THE CONSUMER. THOMSON MULTIMEDIA LTD. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE PROVINCIAL LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How Provincial Laws relates to warranty:
• This warranty gives you specific legal rights which are in addition to statutory warranties that may
vary from Province to Province.
If you purchased your unit outside Canada:
• This warranty does not apply. Contact your dealer for warranty information.
Service calls which do not involve defective materials or workmanship are not covered by
this warranty. Costs of such service calls are the sole responsibility of the purchaser.
31
|