Phase Technology Speaker IW500i User Manual

In-Wall Speaker  
IW500i  
Technical Information for System Engineers  
Key Features  
• BroadBeam® waveguide technology  
delivers a consistent dispersion pattern up  
to 10 kHz for maximum coverage area per  
speaker (EASE™ documented).  
• One 133 mm (5.25 in) polypropylene  
woofer and one 25 mm (1 in) convex alu-  
minum tweeter with FerroFluid cooling  
mounted to an M5 Motorboard.  
• 107 dB Max. SPL offers high output capa-  
bilities and reduced amplification costs.  
Specifications: IW500i  
• Rapid installation blind-mount system for  
quick and secure installation.  
System Type  
5.25" Coax, in wall, sealed (33 Watt transformer for  
25/70.7/100 Volt or 8 Ohm direct)  
8 ohm  
• Easy-access 6-position tap switch for 25,  
70.7 & 100 Volt applications with voice coil/8  
Ohm direct simplifies ordering & inventory  
tracking.  
Impedance (nominal) 1  
Sensitivity dB @ 2.83V/1M  
Sensitivity dB @ 1W/1M 2  
Frequency Response (- 3 dB) 3  
Frequency Response (-10 dB) 3  
Max. Program Power 4  
Max. Continuous Power RMS 5  
Max. Power SPL @ 1 M 6  
88.0 dB  
88.0 dB  
72 Hz - 22 kHz  
55 Hz - 22 kHz  
150 w  
75 w  
107.0 dB  
80º horizontal / 120º vertical  
• Included accessories: Mounting hardware,  
Paint mask, Hole template.  
• Optional accessory: pre-construction  
bracket (AC-IW5-PCB).  
Coverage Angle (-6 dB @ 2 kHz)  
• High-quality white paint finish. Custom  
paint colors optional.  
Coverage Angle (-6 dB @ 10 kHz) 120º horizontal / 120º vertical  
Coverage Angle (Avg. 2 - 10 kHz)  
Directivity Factor (Q)  
Directivity Index (DI) dB  
Tap Selector  
115º horizontal / 115º vertical  
4.2 (Averaged 100 HZ - 10 kHz) / 7.8 (2 kHz)  
5.6 dB (Averaged 100 HZ - 10 kHz) / 8.9 dB (2 kHz)  
6 Position rotary switch with 8 ohm direct  
Description  
The IW500i is a 5.25” coax in-wall loud-  
speaker that delivers effective low-end  
Transducer - Low Frequency Driver 1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround  
Transducer - High Frequency Driver 25mm (1in) Convex aluminum tweeter with waveguide  
response (55 Hz, -10 dB) and optimal off-  
axis performance (up to 10 kHz, EASE™  
documented). SoundTube’s proprietary  
Low Frequency Voice Coil  
Crossover Frequency  
Network Type: Low Pass  
Network Type: High Pass  
Enclosure Material  
Motor-board  
Grille  
Inputs  
Colors  
Height  
25.4 mm / 1.00 in  
3.0 kHz  
12 dB per octave, 2nd order  
12 dB per octave, 2nd order  
Injection molded ABS, glass fiber reinforced  
Cast aluminum  
BroadBeam® waveguide tweeter system deliv-  
ers consistent high-performance audio across  
the operating bandwidth. The IW500i speaker  
design incorporates a low-profile grille and  
6-position tap switch with an 8 Ohm bypass.  
Mounting hardware is included and features a  
fast and secure optimally engineered constant-  
tension mounting system. A pre-construction  
bracket is offered as an optional accessory.  
Powder coated steel  
Spring terminal  
White (only) Paintable  
11.84 in / 300.7 mm  
8.64 in / 219.5 mm  
3.90 in / 99.1 mm  
7.9 lb / 3.6 kg  
Width  
Depth  
Weight  
Shipping Weight  
Included Accessories  
Optional Accersories  
Packaging  
10.0 lb / 4.5 kg  
Paint mask, hole template  
Preconstruction bracket (AC-IW5-PCB)  
1 per box  
Applications  
Designed for in-wall applications, the  
IW500i is ideal for music and messaging in  
boardroom, church, corporate A/V, retail,  
hotel, hospital and education applications.  
For additional bass response down to 41 Hz  
(-10 dB), the CM1001d subwoofer may be  
used.  
Regulatory - CE  
Approved  
1
Impedance listed per IEC 60268-5 with  
a minimum less than 80% the nominal  
impedance  
Transformer Taps  
70.7 V Output  
100 V Output  
25 V Output  
2
3
1w1m sensitivity determined using  
nominal impedance  
33 w 103.0 dB  
17 w 100.5 dB  
9 w 97.5 dB  
6 w 96.0 dB  
3 w 93.0 dB  
5 w 95.0 dB  
3 w 93.0 dB  
1.3 w 89.0 dB  
0.63 w 86.0 dB  
33 w 103.0 dB  
17 w 100.5 dB  
9 w 97.5 dB  
6 w 96.0 dB  
Frequency response measured in half  
or full space as dictated by speaker  
mounting configuration  
4
Max program power is 3 dB above max  
continuous power  
5
6
7
Continuous power rating, EIA-426-B test  
Max output based on max continuous power  
Max useable SPL based on testing  
by NWAA Labs  
Patented SoundTube  
Technologies  
SoundTube Entertainment and the MSE  
Audio Group constantly develop new tech-  
nologies which enhance audio product  
performance. SoundTube Entertainment inno-  
© 2008 SoundTube Entertainment. All rights reserved. PN-TS-CMEZ REV 11.04.08  
 
In-Wall Speaker  
IW500i  
Technical Information for System Engineers  
Horizontal Beamwidth  
180  
150  
120  
90  
60  
30  
-3dB  
-6dB  
-9dB  
0
Hertz  
Vertical Beamwidth  
180  
150  
120  
90  
60  
30  
0
-3dB  
-6dB  
-9dB  
Hertz  
Directivity Index (DI)  
20  
15  
10  
5
0
-5  
-10  
Hertz  
 
In-Wall Speaker  
IW500i  
Technical Information for System Engineers  
Polar Plots  
Horizontal  
Vertical  
250 Hz  
500 Hz  
1,000 Hz  
125 Hz  
0
0
0
0
0
0
0
0
330  
30  
330  
30  
330  
30  
330  
30  
-6  
-12  
-18  
-24  
-30  
-36  
-6  
-6  
-12  
-18  
-24  
-30  
-36  
-6  
-12  
-18  
-24  
-30  
-36  
-12  
300  
60  
300  
60  
300  
60  
300  
60  
-18  
-24  
-30  
270  
-36  
90  
270  
90  
270  
90  
270  
90  
240  
120  
240  
120  
240  
120  
240  
120  
210  
150  
210  
150  
210  
150  
210  
150  
180  
180  
180  
180  
4,000 Hz  
8,000 Hz  
10,000 Hz  
2,000 Hz  
0
0
0
0
0
0
0
0
330  
30  
330  
30  
330  
30  
330  
30  
-6  
-12  
-18  
-24  
-30  
-36  
-6  
-12  
-18  
-24  
-30  
-36  
-6  
-6  
-12  
-18  
-24  
-30  
-36  
-12  
300  
60  
300  
60  
300  
60  
300  
60  
-18  
-24  
-30  
-36  
270  
90  
270  
90  
270  
90  
270  
90  
240  
120  
240  
120  
240  
120  
240  
120  
210  
150  
210  
150  
210  
150  
210  
150  
180  
180  
180  
180  
Technical data, EASE plots, SoundTubeSPEC software & product downloads available at www.soundtube.com  
Mechanical Drawings  
Side  
Top  
Front  
219.5 mm  
(8.64 in)  
300.95 mm  
(11.85 in)  
300.7 mm  
(11.84 in)  
100.44 mm  
(3.95 in)  
200.05 mm  
(8.66 in)  
Optional Accessories - Pre-Construction Bracket  
Included Accessories  
N/A  
SoundTube Entertainment manufactures a complete line of speakers for:  
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing  
All SoundTube products are designed and engineered in the USA.  
 

Peavey Musical Instrument Amplifier Duel 212 User Manual
Pentax Digital Camera Optio S5i User Manual
Philips Air Cleaner AC4144 00 User Manual
Philips CD Player AZ1027 12 User Manual
Philips Cordless Telephone CD2354S User Manual
Philips Network Card SDJ6028 User Manual
Philips Network Card WUB1110 User Manual
Philips Surge Protector SPP4410WA User Manual
Philips Switch SPS1596WA User Manual
ProForm Home Gym PFEL39014 User Manual