Installation and Assembly:
SmartMount™ Universal Tilt Wall Mount
for 10" - 24" LCD Flat Panel Screens
Models: ST 630P, ST 630P-S, ST 630, ST 630-S
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
Features:
R
• Fits 10" to 24" LCD flat panel screens
• One-touch tilt for effortless positioning and adjustment of the screen
Max UL Load Capacity: 80 lb (36.3 kg)
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09
Parts List
ST 630P
Qty Part #
ST 630P-S ST 630
ST 630-S
Part #
Description
Part #
Part #
adapter plate
tilt assembly
Alligator® anchor
M4 x 10 mm phillips screw
M4 x 20 mm phillips screw
retaining spacer
#14 x 2-1/2" hex head wood screw
M5 x 6 mm screw
1
1
2
4
4
4
2
1
1
095-1346
095-0359
590-0097
504-9012
504-9020
590-5005
095-4346
095-0360
590-0097
504-9012
504-9020
590-5005
095-1346
095-0359
590-0097
504-9012
504-9020
590-5005
095-4346
095-0360
590-0097
504-9012
504-9020
590-5005
A
B
C
D
E
F
G
H
I
5S1-015-C03 5S1-015-C03 5S1-015-C03 5S1-015-C03
520-1023
520-1023
520-1114
560-1133
520-1114
560-1133
security driver
A
B
C
D
E
F
G
H
I
ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09
3 of 7
Installation to Single Wood Stud Wall
WARNING
• Make sure that the wall will safely support the combined load of the equipment and all attached hardware and
components.
Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based
on its edges, draw a vertical line down the stud’s center. Place tilt assembly (B) on wall as a template, making sure
that the two mounting holes are over the stud centerline. Level tilt assembly, and mark the center of the two holes.
Drill two 5/32" (4 mm) dia. holes 2-1/2" (65 mm) deep. Make sure that the tilt assembly is level, secure it using two
#14 x 2-1/2" wood screws (G) as shown.
1
Skip to step 2 on page 6.
WARNING
• Tighten wood screws so that tilt assembly is firmly attached, but do not overtighten. Overtightening can damage the
screws, greatly reducing their holding power.
• Never tighten in excess of 80 in. • lb (9 N.M.).
• Make sure that mounting screws are anchored into the center of the stud. The use of an "edge to edge" stud finder is
highly recommended.
• Hardware provided is for attachment of mount through standard thickness drywall or plaster into wood studs. Installers
are responsible to provide hardware for other types of mounting situations.
B
G
ISSUED: 04-27-05 SHEET #: 201-9421-10 10-27-09
4 of 7
|