Patton electronic Digital Camera 3088 User Manual

RocketLink-G™ Model 3088 Series  
G.SHDSL NTU with Fixed  
Serial Interfaces  
Quick Start Guide  
Important—This is a Class A device and is intended for use in a light industrial environment. It is not  
intended nor approved for use in an industrial or residential environment.  
Document Number: 03325U7-001 Rev. C  
Part Number: 07M3088-QS  
Revised: July 17, 2008  
Sales Office: +1 (301) 975-1000  
Technical Support: +1 (301) 975-1007  
 
2.0 Power up the NTU  
Your G.SHDSL NTU comes with one of the following power supply options:  
External AC adaptor with detachable power cord  
External DC power supply with terminal block connector (model 48V-PSM3)  
2.1 Models with external AC adaptor  
1. Connect female plug of the AC power cord to the AC adaptor provided.  
2. Connect the barrel-type connector of the AC adaptor to the Power connector on the RocketLink-G.  
3. Insert the male plug of the AC power cord into an AC power outlet (100–240 VAC).  
2.2 Models with external DC power supply  
The 36-60 VDC DC to DC adapter is supplied with the DC version of the Model 3088. The black and red leads  
plug into a DC source (nominal 48VDC) and the barrel power connector plugs into the barrel power supply jack  
on the 3088. (See figure 1).  
To Power  
To -48VDC  
Supply Jack  
Source  
-Vin  
Black lead (-V)  
Red lead (+V)  
+Vin  
Barrel power connector  
Figure 1. DC Power Supply  
Model 3088 Quick Start Guide  
3
 
Console  
TM / ERR  
Terminal  
DSL  
Power  
Figure 2. Model 3088/CA front panel  
2.3 Power up indication  
Verify that the Power LED (see figure 2) illuminates and remains lit.  
3.0 Connect the G.SHDSL port  
1. Obtain single-twisted-pair cable with an RJ-45 plug connector at each end.  
2. Plug one end of the cable into the RJ-45 socket (labelled DSL) on the RocketLink-G NTU.  
If you are connecting to a DSL service, plug the other end of the cable into the RJ-45 wall  
socket that provides your G.SHDSL service.  
If connecting to another RocketLink-G, verify the other end of the cable is connected to the  
DSL port on other RocketLink-G and the DSL port is correctly configured.  
3. When a DSL link is established, the front-panel DSL LED will turn on.  
4.0 Connect the serial port  
Your RocketLink-G comes with one of the following serial WAN ports for connection to an NTU:  
V.35 (DB-25F)—Model 3088/CA  
X.21 (DB-15)—Model 3088/D  
T1/E1 (120-Ohm RJ-48C and dual 75-Ohm BNC connectors)—Model 3088/K  
T1/E1 (RJ-48C)—Model 3088/T  
4
Model 3088 Quick Start Guide  
 
Connect the serial cable to the RocketLink-G serial port as follows:  
1. Attach the male connector of the serial cable to the female serial connector on the RocketLink-G.  
2. Attach the other end of the cable to the serial connector on the local serial NTU.  
Note The V.35 interface is wired as a DCE. To connect the V.35 interface to third-party equipment wired as a  
DCE, you must use a tail-circuit cable. You can purchase a tail-circuit cable from a datacom-supply ven-  
dor. A tail-circuit cable will cross-over the necessary V.35 signals so that the two DCE interfaces  
can communicate.  
Note You can connect the V.35 interface to an M/34 connector using Patton’s Model 2-34F25M  
interface adapter.  
Note The X.21 interface is wired as a DCE. If you need to change the orientation ti DTE, refer to section “Con-  
necting the Model 3088/D (X.21) Serial Interface” in the Model 3088 Series Getting Started Guide,  
The X.21 interface requires a cable with a male DB-15 connector.  
Note You can configure the T1/E1 interface to either recover the network clock from the T1/E1 line or supply  
the network clock for the T1/E1 line.  
5.0 Additional information  
For detailed information about installing, configuring, operating, and troubleshooting, refer to the Model 3088  
Series Getting Started Guide on the enclosed Patton CD-ROM or at www.patton.com/manuals.  
A.0 Compliance Information  
A.1 Compliance  
EMC:  
FCC Part 15, Class A  
EN55022, Class A  
EN55024  
GOST-R  
Safety:  
UL 60950-1/CSA C22.2 N0. 60950-1  
IEC/EN60950-1  
AS/NZS 60950-1  
GOST-R  
PSTN Regulatory:  
FCC Part 68  
CS03  
Model 3088 Quick Start Guide  
5
 
TBR12 & 13 (K and T models)  
AS/ACIF S016:2001 (K and T models)  
AS/ACIF S043:2003  
-1979, expires 21.04.2011(3088/T/EUI)  
-1980, expires 21.04.2011(3088/K/EUI)  
-1981, expires 21.04.2011(3088/D/EUI)  
-1982, expires 21.04.2011(3088/CA/EUI)  
A.2 FCC Part 68 (ACTA) Statement  
This equipment complies with Part 68 of FCC rules and the requirements adopted by ACTA. On the bottom side of  
this equipment is a label that contains—among other information—a product identifier in the format US:  
AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.  
The method used to connect this equipment to the premises wiring and telephone network must comply with the  
applicable FCC Part 68 rules and requirements adopted by the ACTA.  
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that  
temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone com-  
pany will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with  
the FCC if you believe it is necessary.  
The telephone company may make changes in its facilities, equipment, operations or procedures that could  
affect the operation of the equipment. If this happens the telephone company will provide advance notice in  
order for you to make necessary modifications to maintain uninterrupted service.  
If trouble is experienced with this equipment, for repair or warranty information, please contact our company. If  
the equipment is causing harm to the telephone network, the telephone company may request that you discon-  
nect the equipment until the problem is resolved.  
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public ser-  
vice commission or corporation commission for information.  
1.3 Radio and TV Interference (FCC Part 15)  
This equipment generates and uses radio frequency energy, and if not installed and used properly—that is, in  
strict accordance with the manufacturer's instructions—may cause interference to radio and television recep-  
tion. This equipment has been tested and found to comply with the limits for a Class A computing device in accor-  
dance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable  
protection from such interference in a commercial installation. However, there is no guarantee that interference  
will not occur in a particular installation. If the equipment causes interference to radio or television reception,  
which can be determined by disconnecting the cables, try to correct the interference by one or more of the fol-  
lowing measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna,  
and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and  
receiver are on different branches).  
6
Model 3088 Quick Start Guide  
 
1.4 Industry Canada Notice  
This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is con-  
firmed by the registration number. The abbreviation, IC, before the registration number signifies that registra-  
tion was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications  
were met. It does not imply that Industry Canada approved the equipment.  
This Declaration of Conformity means that the equipment meets certain telecommunications network protective,  
operational and safety requirements. The Department does not guarantee the equipment will operate to the  
user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to  
the facilities of the local telecommunications company. The equipment must also be installed using an acceptable  
method of connection. In some cases, the company’s inside wiring associated with a single line individual service  
may be extended by means of a certified connector assembly (telephone extension cord). The customer should  
be aware that compliance with the above condition may not prevent degradation of service in some situations.  
supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give  
the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for  
their own protection that the ground connections of the power utility, telephone lines and internal metallic water  
pipe system, are connected together. This protection may be particularly important in rural areas.  
A.5 EC Declaration of Conformity  
(See section A.6 “EG-Konformitätserklärung” for German version.)  
Product Description: RocketLink-G 3088 Series  
This equipment conforms to the requirements of Council Directive 1999/5/EC on the approximation of the laws  
of the member states relating to Radio and Telecommunication Terminal Equipment and the mutual recognition  
of their conformity.  
The safety advice in the documentation accompanying the products shall be obeyed.  
The conformity to the above directive is indicated by the CE sign on the device.  
The signed Declaration of Conformity can be downloaded from www.patton.com/certifications/.  
A.6 EG-Konformitätserklärung  
(see section A.5 “EC Declaration of Conformity” for English version)  
Produktbezeichnung: RocketLink-G 3088 Sendereihe  
Die bezeichneten Produkte stimmen in der von uns in Verkehr gebrachten Ausführung mit den Vorschriften fol-  
gender Richtlinie überein:  
R&TTE 1999/5/EG  
Richtlinie des europäischen Parlaments und des Rates zur Angleichung der Rechtsvorschriften der  
Mitgliedstaaten über Funkanlagen und Telekommunikations-Endeinrichtungen und die gegenseitige  
Anerkennung ihrer Konformität.  
Model 3088 Quick Start Guide  
7
 
   
Die Sicherheitshinweise in der mitgelieferten Produktdokumentation sind zu beachten.  
Die Konformität mit der oben erwähnten Richtlinie wird durch das CE-Zeichen auf dem  
Gerät bestätigt.  
Die unterzeichnete Konformitätserklärung kann heruntergeladen werden von: www.patton.com/  
certifications/.  
A.7 Authorized European Representative  
D R M Green  
European Compliance Services Limited.  
Oakdene House, Oak Road  
Watchfield,  
Swindon, Wilts SN6 8TD, UK  
8
Model 3088 Quick Start Guide  
 
Copyright statement  
Copyright © 2007, Patton Electronics Company. All rights reserved.  
The information in this document is subject to change without notice. Patton Electronics assumes no  
liability for errors that may appear in this document.  
Trademarks statement  
The term RocketLink-G is a trademark of Patton Electronics Company. All other trademarks presented in this docu-  
ment are the property of their respective owners.  
Patton support headquarters in the USA  
Online support: Available at www.patton.com  
E-mail support: E-mail sent to [email protected] will be answered within 1 business day  
Telephone support: Standard telephone support is available five days a week—from 8:00 am to  
5:00 pm EST (1300 to 2200 UTC/GMT)—by calling +1 (301) 975-1007  
Support via VoIP: Contact Patton free of charge by using a VoIP ISP phone to call sip:[email protected]  
Fax: +1 (253) 663-5693  
Alternate Patton support for Europe, Middle East, and Africa (EMEA)  
Telephone support: Standard telephone support is available five days a week—from 8:00 am to  
5:00 pm CET (0900 to 1800 UTC/GMT)—by calling +41 (0)31 985 25 55  
Fax: +41 (0)31 985 25 26  
Note For additional service and support information, refer to the “Contacting Patton for assistance” chapter  
of the RocketLink-G 3088 Getting Started Guide located on the CD-ROM that came with your RocketLink-G  
Warranty, Trademark, & Compliance Information  
For warranty, trademark and compliance information, refer to the RocketLink-G 3088 Getting Started Guide located  
on the CD-ROM that came with your NTU or available online at www.patton.com.  
In accordance with the requirements of council directive 2002/96/EC on Waste of  
Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate  
this product from other waste and scrap and deliver to the WEEE collection system in  
your country for recycling.  
Model 3088 Quick Start Guide  
9
 
NOTES  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
10  
Model 3088 Quick Start Guide  
 
NOTES  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
Model 3088 Quick Start Guide  
11  
 
NOTES  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
12  
Model 3088 Quick Start Guide  
 

Miele Washer W 863 User Manual
NEC Computer Monitor colour monitor User Manual
NEC Flat Panel Television V423AVT User Manual
NETGEAR Security Camera WNDR3700v4 User Manual
NordicTrack Home Gym NTTL09992 User Manual
Oceanic Scuba Diving Equipment 04 8930 07 User Manual
Olicom Network Router A400A User Manual
One for All Universal Remote URC 7532 User Manual
Ozark Trail Tent WMT 1410 User Manual
Panasonic Answering Machine KX TG2670N User Manual