This product complies with the RoHS Directive (EU 2002/95/EC).
Zener Diodes
MAZSxxxG Series
Silicon planar type
For constant voltage, constant current, waveform clip-
per and surge absorption circuit
■ Features
■ Package
•
• Low noise type
Code
• VZ rank classified(VZ = 2.4 V to 39 V)
SSMini2-F4
Pin Name
1: Anode
2: Cathode
•
■ Absolute Maximum Ratings Ta = 25°C
■ Marking Symbol
Parameter
Symbol
IFRM
Ptot
Rating
200
Unit
mA
mW
°C
Repetitive peak forward current
Total power dissipation *
Junction temperature
Refer to the list of the electrical
characteristics within part numbers
150
Tj
150
■ Internal Connection
Storage temperature
Tstg
−55 to +150
°C
Note) : With a printed circuit board
*
1
2
1
■ Common Electrical Characteristics Ta = 25°C 3°C *
Parameter
Symbol
VF
Conditions
Min
Typ
Max
Unit
V
Forward voltage
IF = 10 mA
0.9
1.0
2
Zener voltage *
VZ
IZ
Specified value
V
Reverse current
IR
VR Specified value
µA
Ω
Refer to the list of the
Zener rise operating resistance
Zener operating resistance
Temperature coefficient of zener voltage *
RZK
RZ
IZ
IZ
IZ
Specified value
Specified value
Specified value
electrical characteristics
within part numbers
Ω
3
SZ
mV/°C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Rated input/output frequency: 5 MHz
3. 1: The VZ value is for the temperature of 25°C. In other cases, carry out the temperature compensation.
*
2: Guaranteed at 20 ms after power application.
*
*
3: T = 25°C to 150°C
j
Publication date: October 2007
SKE00034BED
1
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZSxxxG Series
■ Electrical characteristics within part numbers (continued) Ta = 25°C 3°C
Temperature
coefficient of
zener voltage
SZ (mV/°C)
Reverse
current
IR (µA)
VR
Zener operating
resistance
Zener voltage
VZ (V)
Part Number
RZ (Ω)
RZK (Ω)
Marking symbol
IZ
(mA)
IZ
(mA)
IZ
IZ
(mA)
Min Nom Max
Max
Max
Max
Typ
(V)
(mA)
MAZS100G0L
MAZS100GLL
MAZS100GML
MAZS100GHL
MAZS110G0L
MAZS110GLL
MAZS110GML
MAZS110GHL
MAZS120G0L
MAZS120GLL
MAZS120GML
MAZS120GHL
MAZS130G0L
MAZS130GLL
MAZS130GML
MAZS130GHL
MAZS150G0L
MAZS150GLL
MAZS150GML
MAZS150GHL
MAZS160G0L
MAZS160GLL
MAZS160GML
MAZS160GHL
MAZS180G0L
MAZS180GLL
MAZS180GML
MAZS180GHL
MAZS200G0L
MAZS200GLL
MAZS200GML
MAZS200GHL
MAZS220G0L
MAZS220GLL
MAZS220GML
MAZS220GHL
MAZS240G0L
MAZS240GLL
MAZS240GML
MAZS240GHL
MAZS270G0L
MAZS270GLL
MAZS270GML
MAZS270GHL
MAZS300G0L
MAZS300GLL
MAZS300GML
MAZS300GHL
MAZS330G0L
MAZS330GLL
MAZS330GML
MAZS330GHL
9.40 10.00 10.60
9.44 9.70 9.92
9.75 10.00 10.25
10.07 10.30 10.59
10.40 11.00 11.60
10.40 10.70 10.94
10.73 11.00 11.28
11.05 11.30 11.60
11.40 12.00 12.70
11.40 11.70 11.96
11.73 12.00 12.33
12.06 12.30 12.68
12.40 13.00 14.10
12.40 12.70 12.99
12.73 13.00 13.40
13.25 13.70 14.08
13.90 15.00 15.60
13.90 14.30 14.76
14.60 15.00 15.35
14.95 15.30 15.60
15.30 16.00 17.10
15.30 15.70 16.09
15.70 16.00 16.50
16.26 16.70 17.10
16.90 18.00 19.10
16.90 17.30 17.76
17.55 18.00 18.45
18.20 18.70 19.10
18.80 20.00 21.20
18.85 19.30 19.81
19.50 20.00 20.50
20.15 20.70 21.19
20.80 22.00 23.30
20.80 21.30 21.86
21.45 22.00 22.55
22.10 22.70 23.24
22.80 24.00 25.60
22.80 23.30 23.97
23.50 24.00 24.70
24.35 25.00 25.60
25.10 27.00 28.90
25.30 26.00 26.70
26.30 27.00 27.70
27.30 28.00 28.70
28.00 30.00 32.00
28.30 29.00 29.70
29.30 30.00 30.80
30.20 31.00 31.80
31.00 33.00 35.00
31.20 32.00 32.80
32.20 33.00 33.80
33.20 34.00 34.90
10 or 10_ or 10− or 10^
10_
10−
10^
5
5
5
5
5
5
5
5
5
5
2
2
2
0.05 7.0
30
5
5
5
5
5
5
5
5
5
5
2
2
2
60
0.5
0.5
0.5
0.5
6.4
5
11 or 11_ or 11− or 11^
11_
11−
11^
0.05 8.0
0.05 9.0
30
30
60
80
80
80
80
80
7.4
8.4
9.4
5
5
5
5
5
5
5
5
5
2
2
2
12 or 12_ or 12− or 12^
12_
12−
12^
13 or 13_ or 13− or 13^
13_
13−
13^
0.05 10.0 35
0.05 11.0 40
0.05 12.0 50
0.05 13.0 60
0.05 15.0 80
0.05 17.0 80
0.05 19.0 100
0.05 21.0 120
0.05 23.0 160
0.05 25.0 200
15 or 15_ or 15− or 15^
15_
15−
15^
0.5 11.4
0.5 12.4
0.5 14.4
16 or 16_ or 16− or 16^
16_
16−
16^
18 or 18_ or 18− or 18^
18_
18−
18^
20 or 20_ or 20−- or 20^
20_
20−
20^
100 0.5 16.4
100 0.5 18.4
120 0.5 20.4
120 0.5 23.4
160 0.5 26.6
200 0.5 29.7
22 or 22_ or 22− or 22^
22_
22−
22^
24 or 24_ or 24− or 24^
24_
24−
24^
27 or 27_ or 27− or 27^
27_
27−
27^
30 or 30_ or 30− or 30^
30_
30−
30^
33 or 33_ or 33− or 33^
33_
33−
33^
SKE00034BED
3
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZSxxxG Series
■ Electrical characteristics within part numbers (continued) Ta = 25°C 3°C
Temperature
coefficient of
zener voltage
SZ (mV/°C)
Reverse
current
IR (µA)
VR
Zener operating
resistance
Zener voltage
VZ (V)
Part Number
RZ (Ω)
RZK (Ω)
Marking symbol
IZ
(mA)
IZ
(mA)
IZ
IZ
(mA)
Min Nom Max
Max
Max
Max
Typ
(V)
(mA)
MAZS360G0L
MAZS360GLL
MAZS360GML
MAZS360GHL
MAZS390G0L
MAZS390GLL
MAZS390GML
MAZS390GHL
34.00 36.00 38.00
34.10 35.00 35.90
35.10 36.00 36.90
36.10 37.00 37.90
37.00 39.00 41.00
37.10 38.00 39.00
38.00 39.00 40.00
39.00 40.00 41.00
36 or 36_ or 36− or 36^
36_
36−
36^
2
2
0.05 27.0 250
0.05 30.0 300
2
2
250 0.5 33.0
300 0.5 35.6
2
39 or 39_ or 39− or 39^
39_
39−
39^
2
SKE00034BED
4
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZSxxxG Series
Ptot Ta
IZ VZ
IZ VZ
250
200
150
100
50
100
10
100
10
Ta = 25°C
Static
Ta = 25°C
Static
charac-
teristics
Heat sink
Copper foil
0.8 mm × 0.8 mm
charac-
teristics
MAZS039
1
1
0.1
0.1
0.01
0.001
0.01
0.001
MAZS047
0
0
40
80
120
160
200
0
2
4
6
8
10
12
0
10
20
30
40
50
60
(
)
Ambient temperature Ta °C
(
)
(
)
V
Zener voltage VZ
V
Zener voltage VZ
IZ VZ
IZ VZ
RZ IZ
100
10
100
10
1000
100
10
Ta = 25°C
Tj = 25°C
Dynamic
charac-
Tj=25°C
Dynamic
charac-
MAZS024
MAZS390
teristics
teristics
1
1
MAZS160
MAZS043
0.1
0.1
MAZS068
MAZS082
MAZS100
MAZS062
MAZS056
0.01
0.001
0.01
0.001
MAZS051
MAZS039
MAZS047
1
0.1
0
10
20
30
40
50
60
0
2
4
6
8
10
12
1
10
100
1000
(
)
V
Zener voltage VZ
(
)
Zener voltage VZ
V
(
)
Zener current IZ mA
IF VF
SZ IZ
100
10
25
20
15
10
5
Ta = 25°C
MAZS240
MAZS160
1
MAZS100
MAZS068
0.1
0.01
MAZS039
MAZS024
0
−5
0
0.2
0.4
0.6
0.8
1.0
1.2
0
10
20
30
40
50
(
)
V
Forward voltage VF
(
)
Zener current IZ mA
SKE00034BED
5
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZSxxxG Series
PZSM tW
Zth tW
100
10
1
10
1
Ta = 25°C
PZSM
Heat sink
Copper foil 0.8 mm × 0.8 mm
tW
Non repetitive
Without heat sink (Typ. value)
MAZS075
MAZS039
With heat sink (Typ. value)
0.1
0.01
0.1
0.01
0.1
1
10
100
0.01
0.1
1
10
100
(ms)
Pulse width tW
Pulse width
( )
s
tW
SKE00034BED
6
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZSxxxG Series
SSMini2-F4
Unit: mm
0.80 +0.05
−
0.03
0.13 +0.05
−0.02
2
0 to 0.05
1
0.30 0.05
5°
SKE00034BED
7
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
|