Panasonic DVD Player DVD S26 User Manual

The illustration shows DVD-S29 for U.S.A. and Canada.  
Operating Instructions  
DVD/CD PLAYER  
MULTI-FORMAT PLAYBACK  
DVD-RAM  
recorded with DVD video recorders etc.  
Model No.  
DVD-S29/DVD-S26  
Video & Still pictures (JPEG)  
DVD-Video/Video CD/CD  
sold on the market  
Movie, Music etc.  
If you have any questions contact  
DVD-R/DVD-RW/+R/+RW  
recorded and finalized with DVD video recorders etc.  
In the U.S.A.: 1-800-211-PANA(7262)  
In Canada: 1-800-561-5505  
Video (played as DVD-Video)  
CD-R/CD-RW  
recorded and finalized with personal computers etc.  
Music (WMA/MP3) & Still pictures (JPEG)  
See page 5 for details.  
For U.S.A.: The warranty can be found on page 20.  
For Canada: The warranty can be found on page 21.  
La referencia rápida en español se puede encontrar en la página 22, 23.  
Unless otherwise indicated, illustrations in these operating instructions are DVD-S29  
for U.S.A. and Canada.  
RQT8218-P  
P
PC  
PX  
 
Except for U.S.A. and Canada  
CAUTION!  
THIS PRODUCT UTILIZES A LASER.  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
DO NOT OPEN COVERS AND DO NOT REPAIR  
YOURSELF. REFER SERVICING TO QUALIFIED  
PERSONNEL.  
CLASS 1  
LASER PRODUCT  
WARNING:  
TO REDUCE THE RISK OF FIRE,  
ELECTRIC SHOCK OR PRODUCT  
DAMAGE, DO NOT EXPOSE THIS  
APPARATUS TO RAIN, MOISTURE,  
DRIPPING OR SPLASHING AND THAT  
NO OBJECTS FILLED WITH LIQUIDS,  
SUCH AS VASES, SHALL BE PLACED  
ON THE APPARATUS.  
(Inside of product)  
THE FOLLOWING APPLIES ONLY IN THE U.S.A.  
CAUTION:  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules.  
CAUTION!  
DO NOT INSTALL OR PLACE THIS UNIT IN A  
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER  
CONFINED SPACE. ENSURE THE UNIT IS WELL  
VENTILATED. TO PREVENT RISK OF ELECTRIC  
SHOCK OR FIRE HAZARD DUE TO  
These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause  
harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
Any unauthorized changes or modifications to this  
equipment would void the user’s authority to operate  
this device.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and  
(2) this device must accept any interference received,  
including interference that may cause undesired  
operation.  
The socket outlet shall be installed near the equipment  
and easily accessible or the mains plug or an  
appliance coupler shall remain readily operable.  
OVERHEATING, ENSURE THAT CURTAINS AND  
ANY OTHER MATERIALS DO NOT OBSTRUCT  
THE VENTILATION VENTS.  
DO NOT OBSTRUCT THE UNIT’S VENTILATION  
OPENINGS WITH NEWSPAPERS,  
TABLECLOTHS, CURTAINS, AND SIMILAR  
ITEMS.  
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
DO NOT PLACE SOURCES OF NAKED FLAMES,  
SUCH AS LIGHTED CANDLES, ON THE UNIT.  
DISPOSE OF BATTERIES IN AN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE SCREWS.  
NO USER-SERVICEABLE PARTS  
INSIDE.  
ENVIRONMENTALLY FRIENDLY MANNER.  
REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
THIS UNIT IS INTENDED FOR USE IN MODERATE  
CLIMATES.  
The lightning flash with arrowhead  
symbol, within an equilateral triangle, is  
intended to alert the user to the presence  
of uninsulated “dangerous voltage” within  
the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of  
electric shock to persons.  
This product may receive radio interference caused by  
mobile telephones during use. If such interference is  
apparent, please increase separation between the  
product and the mobile telephone.  
The exclamation point within an  
equilateral triangle is intended to alert the  
user to the presence of important  
operating and maintenance (servicing)  
instructions in the literature accompanying  
the appliance.  
3
 
IMPORTANT SAFETY INSTRUCTIONS  
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating  
instructions handy for future reference.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s  
instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding-type plug  
has two blades and a third grounding prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by  
the manufacturer, or sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is  
damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate normally, or has  
been dropped.  
Product Service  
1. Damage requiring service—The unit should be serviced by qualified service  
personnel if:  
Product information  
(a) The AC power supply cord or AC adaptor has been damaged; or  
(b) Objects or liquids have gotten into the unit; or  
For product information or assistance with product operation:  
(c) The unit has been exposed to rain; or  
In the U.S.A., refer to “Customer Services Directory” on page 20.  
(d) The unit does not operate normally or exhibits a marked change in  
performance; or  
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at  
closest to you.  
(e) The unit has been dropped or the cabinet damaged.  
2. Servicing—Do not attempt to service the unit beyond that described in these  
operating instructions. Refer all other servicing to authorized servicing personnel.  
3. Replacement parts—When parts need replacing ensure the servicer uses parts  
specified by the manufacturer or parts that have the same characteristics as the  
original parts. Unauthorized substitutes may result in fire, electric shock, or other  
hazards.  
4. Safety check—After repairs or service, ask the servicer to perform safety checks to  
confirm that the unit is in proper working condition.  
4
 
Discs that can be played  
Operations in these instructions are described mainly with the formats. The icons such  
as [RAM] show the formats.  
Handling precautions  
Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable).  
Do not write on the label side with a ball-point pen or other writing instrument.  
Do not use record cleaning sprays, benzine, thinner, static electricity prevention  
liquids or any other solvent.  
Do not use scratch-proof protectors or covers.  
Do not use the following discs:  
– Discs with exposed adhesive from removed stickers or labels (rented discs etc).  
– Discs that are badly warped or cracked.  
– Irregularly shaped discs, such as heart shapes.  
DVD-RAM [RAM] [JPEG]  
[RAM] Recorded with devices using Version 1.1 of the  
Video Recording Format (a unified video recording  
standard), such as DVD video recorders, DVD video  
cameras, personal computers, etc.  
[JPEG] Recorded using the DCF (Design rule for Camera  
File system) Standard Version 1.0. To play JPEG files,  
select “Play as Data Disc” (page 15, Other Menu).  
DVD-Video [DVD-V]  
Example:  
Tips for making WMA/MP3 and JPEG discs (For CD-R/CD-RW)  
Discs marked with the  
labels containing the region  
number “1” or “ALL”  
1
Discs must conform to ISO9660 level 1 or 2 (except for extended formats).  
This unit is compatible with multi-session but if there are a lot of sessions it takes more  
time for play to start. Keep the number of sessions to a minimum to avoid this.  
If groups were created away from the root like “002 group” in the illustration below, the  
eighth one onwards is displayed on the same vertical line in the menu screen.  
2
1
ALL  
4
DVD-R (DVD-Video)/DVD-RW (DVD-Video) [DVD-V]  
Discs recorded and finalized§ on DVD video recorders or  
DVD video cameras  
There may be differences in the display order on the menu screen and computer screen.  
This unit cannot play files recorded using packet write.  
Naming folders and files  
(Files are treated as content and folders are treated as  
groups on this unit.)  
At the time of recording, prefix folder and file names. This  
should be with numbers that have an equal number of digits,  
and should be done in the order you want to play them (this  
may not work at times).  
e.g. [MP3]  
iR (Video)/iRW (Video) [DVD-V]  
root  
Discs recorded and finalized§ on DVD video recorders or  
DVD video cameras  
001 group  
Video CD [VCD]  
Including SVCD (Conforming to IEC62107)  
001 track.mp3  
002 track.mp3  
003 track.mp3  
002 group  
Files must have the extension:  
“.WMA” or “.wma”  
“.MP3” or “.mp3”  
“.JPG”, “.jpg”, “.JPEG” or “.jpeg”  
[WMA]  
You cannot play WMA files that are copy protected.  
This unit is not compatible with Multiple Bit Rate (MBR: a  
file that contains the same content encoded at several different bit rates).  
[MP3]  
This unit is not compatible with ID3 tags.  
Compatible sampling rate: 8, 11.02, 12, 16, 22.05, 24, 32, 44.1, and 48 kHz  
001 track.mp3  
CD [CD] [WMA] [MP3] [JPEG] [VCD]  
002 track.mp3  
003 track.mp3  
004 track.mp3  
003 group  
This unit can play CD-R/RW recorded with the above  
formats. Close the sessions or finalize§ the disc after  
recording.  
001 track.mp3  
002 track.mp3  
003 track.mp3  
[WMA] [MP3] [JPEG] This unit also plays HighMAT discs.  
§A process that allows play on compatible equipment.  
It may not be possible to play the above discs in all cases due to the type of disc or  
condition of the recording.  
Discs that cannot be played  
DVD-Audio, DVD-ROM, CD-ROM, CDV, CD-G, SACD, Divx Video Discs and Photo CD,  
DVD-RAM that cannot be removed from their cartridge, 2.6-GB and 5.2-GB DVD-RAM,  
and “Chaoji VCD” available on the market including CVD, DVCD and SVCD that do not  
conform to IEC62107.  
[JPEG]  
JPEG files taken on a digital camera that conforms to the DCF Standard Version 1.0 are displayed.  
– Pictures taken using digital camera functions not supported by DCF like automatic  
picture rotation may not be displayed.  
– Files that have been altered, edited or saved with computer picture editing software  
may not be displayed.  
This unit cannot display moving pictures, MOTION JPEG and other such formats, still  
pictures other than JPEG (e.g. TIFF) or play pictures with attached audio.  
Note about using a DualDisc  
The digital audio content side of a DualDisc does not meet the technical  
specifications of the Compact Disc Digital Audio (CD-DA) format so play may not be  
possible.  
5
 
STEP 1 Connection to a television  
Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.  
Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.  
Turn off all equipment before connection and read the appropriate operating instructions.  
Connect the terminals of the same color.  
Television  
With COMPONENT VIDEO IN  
With VIDEO IN or S VIDEO IN  
AUDIO IN  
COMPONENT  
VIDEO IN  
AUDIO IN  
VIDEO  
IN  
or  
S VIDEO  
IN  
R
L
R
L
S video cable§  
Audio/video  
Video  
cables  
Audio/video cable  
(included)  
Not used  
cable (included)  
Y
P
B
R
Y
P
B
R
L
L
P
P
Back of the  
unit  
R
R
Please connect directly to TV.  
Please connect directly to TV.  
§When using this connection, the audio cable  
(red and white plugs) should also be connected.  
Select “Darker” from the “Black Level Control” (page 16,  
“Video” tab).  
To enjoy progressive video  
Connect to a progressive output compatible television.  
Set “Video Output Mode” to “480p”, then follow the instructions  
on the menu screen (page 15, Picture Menu).  
You can connect the audio cable to the 2-  
channel audio input terminals of an analog  
amplifier or system component to enjoy  
stereo sound.  
All Panasonic televisions with 480p input connectors  
are compatible. Consult the manufacturer if you have another  
brand of television.  
6
 
Connect the AC power supply cord last  
Enjoying multi-channel surround sound  
AC power supply cord (included)  
Y
P
B
R
L
Amplifier with a built-in  
Coaxial cable  
To household AC outlet  
L
decoder or a decoder-  
R
P
AC IN  
amplifier combination  
Conserving power  
This unit consumes a small amount of power, even when it is turned off  
(1 W). To save power when the unit is not to be used for a long time,  
unplug it from the household AC outlet.  
R
Please connect directly to TV.  
COAXIAL IN  
Change “PCM Digital Output”, “Dolby Digital” and “DTS Digital Surround”  
(page 17, “Audio” tab).  
Except U.S.A. and Canada  
If the power plug does not fit your AC outlet, use the  
power plug adaptor (included).  
If it still doesn’t fit, contact an electrical parts distributor  
for assistance.  
STEP 2 The remote control  
Insert so the poles (i and j) match those in the remote control. Mishandling of batteries can cause electrolyte leakage which can  
Batteries  
Do not use rechargeable type batteries.  
Do not:  
damage items the fluid contacts and may cause a fire.  
R6/LR6, AA  
Remove if the remote control is not going to be used for a long period  
of time. Store in a cool, dark place.  
mix old and new batteries.  
use different types at the same time.  
heat or expose to flame.  
take apart or short circuit.  
Use  
Aim at the remote control sensor (page 8), avoiding obstacles, at a  
maximum range of 7 m (23 feet) directly in front of the unit.  
attempt to recharge alkaline or manganese batteries.  
use batteries if the covering has been peeled off.  
STEP 3 QUICK SETUP  
Turn on the television and select the appropriate video input on the television.  
QUICK OSD FL SELECT OPEN/CLOSE  
1
2
3
4
5
ADVANCED  
AV  
ADVANCED  
DISC REVIEW ENHANCER SURROUND  
SOUND  
ENHANCEMENT  
DIRECT NAVIGATOR  
PLAY LIST  
MENU  
RETURN  
SETUP  
SETUP  
ENTER  
TOP MENU  
FUNCTIONS  
ENTER  
ENTER  
RETURN  
Power ON.  
Shows QUICK SETUP  
screen.  
Follow the message  
and make the settings. QUICK SETUP.  
Press to finish  
Press to exit.  
SUBTITLE AUDIO ANGLE/PAGE SETUP  
PLAY MODE PLAY SPEED ZOOM  
GROUP  
To change these settings later  
Select “QUICK SETUP” (page 17, “Others” tab).  
7
 
Basic play  
2Open the disc tray.  
1Power ON.  
Stop  
Pause  
Remote control sensor  
[DVD-S29]  
Displaying current playback  
condition page 9  
3Load the disc.  
4Start play.  
Load double-sided discs so the label for the side you want to play is facing up.  
[RAM] Remove discs from their cartridges before use.  
[DVD-S26]  
Reviewing titles/programs to  
play page 9  
QUICK OSD  
ADVANCED  
FL SELECT OPEN/CLOSE  
Repeat play  
2
4
1
AV  
ADVANCED  
Select “Repeat” or “A-B Repeat” (page 14, Play Menu).  
DISC REVIEW ENHANCER SURROUND  
SOUND  
ENHANCEMENT  
Skip  
1
4
2
5
8
0
3
6
Search  
(during play)  
(during pause)  
[RAM] Can also skip to the markers.  
PICTURE MODE  
CM SKIP  
Slow-motion  
Up to 5 steps  
7
CANCEL  
9
QUICK REPLAY  
Press [1] (PLAY) to restart play.  
[VCD] Slow-motion, forward direction only  
10  
SKIP  
SLOW/SEARCH  
Stop  
STOP  
PAUSE  
PLAY  
The position is memorized when “!” flashes on the display.  
Press [1] (PLAY) to resume.  
Press [] to clear the position.  
Pause  
DIRECT NAVIGATOR  
TOP MENU  
PLAY LIST  
MENU  
Press [1] (PLAY) to restart play.  
Discs continue to rotate while menus are displayed. Press [] when you finish to  
preserve the unit’s motor and your television screen.  
Total title number may not be displayed properly on iR/iRW.  
Standby/on switch (Í/I)  
Press to switch the unit from on to standby mode or vice versa. In standby mode, the  
unit is still consuming a small amount of power.  
[Except\U.S.A.\and\Canada]  
If you are experiencing problems, refer to troubleshooting guide (page 18, 19).  
Standby/on indicator (Í)  
When the unit is connected to the AC mains supply, this indicator lights up in standby  
mode and goes out when the unit is turned on.  
8
 
Convenient functions  
[DVD-S29]  
Displaying current playback condition  
QUICK OSD  
Group skip  
ENTER  
Quick On Screen Display  
[WMA] [MP3] [JPEG]  
(Main unit)  
Press [QUICK OSD].  
[VCD] forward direction only  
e.g. [DVD-V]  
Current playback number  
Frame-by-frame  
(during pause)  
Elapsed play time  
ENTER  
[RAM] [DVD-V] [VCD]  
Chapter  
Title  
1
1
Time  
0 : 00 : 22  
Select  
Register  
Playback condition  
Return to  
previous  
screen  
Program Playback  
RETURN  
On-screen  
ENTER  
item select  
Play mode  
To exit the screen, press [QUICK OSD].  
Current position  
[RAM] [DVD-V] [VCD] [CD]  
e.g. To select 12: [S10] [1] [2]  
[WMA] [MP3] [JPEG]  
1
4
7
2
5
8
0
3
6
Reviewing titles/programs to play  
[DVD-S26]  
ADVANCED  
Enter  
number  
DISC REVIEW  
ENTER  
Advanced Disc Review  
[RAM] [DVD-V] (Except iR/iRW) (Normal playback only)  
9
e.g. To select 123: [1]  
[2]  
[3]  
[ENTER]  
(Main unit)  
10  
1
2
Press [ADVANCED DISC  
REVIEW].  
Press [1] (PLAY) when  
you find a title/program to  
play.  
[DVD-V]  
Shows a disc top menu.  
[RAM]  
DIRECT NAVIGATOR  
Chapter  
Title  
1
1
Time  
0 : 00 : 22  
Plays the programs (page 13).  
TOP MENU  
PLAY LIST  
[DVD-V]  
Shows a disc menu.  
[RAM]  
Disc  
You can also review each 10 minutes. Select “Interval Mode” (page 16, “Advanced  
Disc Review” in “Disc” tab).  
menu  
Plays a play list (page 13).  
This may not work depending on the play position.  
MENU  
[VCD] with playback control  
Shows a disc menu.  
RETURN  
SOUND  
Enjoying clear sound  
ENHANCEMENT  
Sound Enhancement  
[RAM] [DVD-V] [VCD] [CD] [WMA] [MP3]  
Number display ,------. Time display  
FL SELECT  
Main unit display  
You can enjoy clear sound by adding higher frequency signals not recorded on the disc.  
Press [SOUND ENHANCEMENT] to select  
Information screen  
[JPEG]  
SUBTITLE  
Functions  
“On”.  
This does not work when Advanced Surround  
page 10) is on.  
This may not work depending on the discs recording.  
 
Sound Enhancement On  
(
9
Convenient functions  
PLAY SPEED  
Recalling recommended audio/video setting  
AV  
ENHANCER  
Changing play speed [RAM] [DVD-V]  
AV Enhancer  
During play, press [PLAY SPEED] to select  
“Fast”, “Normal” or “Slow”.  
Functions  
By pressing just one button the disc type is automatically determined  
and the best audio and video settings are configured.  
Functions  
Play Speed x1.4  
Normal  
Fast  
Fine adjustments  
While the menu is displayed  
Press [21] to increase or decrease the playing  
Press [AV ENHANCER] to select “On”.  
This may not work depending on the discs recording.  
AV Enhancer On  
Slow  
speed from k0.6 to k1.4 in 0.1 units.  
When AV Enhancer is on, you cannot change the individual settings indicated below.  
Audio settings:  
Press [1] (PLAY) to return to the normal play.  
After you change the speed  
Advanced Surround (below), Sound Enhancement (page 9),  
Dialogue Enhancer (page 15)  
Video settings:  
Advanced Surround (left) and Sound Enhancement (page 9) do not work.  
– Audio output switches to 2 ch.  
– 96 kHz sampling frequency is converted to 48 kHz.  
This may not work depending on the discs recording.  
Picture Mode (below)  
ADVANCED  
CM SKIP  
Enjoying virtual surround  
Advanced Surround  
SURROUND  
Skipping a minute forward [RAM] [DVD-V] (Except iR/iRW)  
[RAM] [DVD-V] [VCD] (2 or more channels)  
Convenient when you want to skip commercials etc.  
During play, press [CM SKIP].  
This may not work depending on the play position.  
Press [ADVANCED SURROUND] to select “SP 1”,  
“SP 2”,“HP 1”or “HP 2”.  
Functions  
SP (Speaker) 1 Natural  
HP (Headphone) 1 Natural HP 2 Enhanced Off  
SP 2 Enhanced  
Advanced Surround SP1  
ZOOM  
Zoom [RAM] [DVD-V] [VCD]  
When using discs recorded with surround sound, sound seems to come from  
speakers on either side of you.  
When using headphones from the connected equipment, select “HP 1” or “HP 2”.  
Optimum seating position is 3 to 4 times the distance between the front left and right  
speakers or the width of the television if using the television’s speakers.  
Do not use in combination with surround effects on other equipment.  
This feature expands the letterbox picture to fit the screen.  
Press [ZOOM] to select the preset aspect ratio or  
“Auto”. (Just Fit Zoom)  
Functions  
Just Fit Zoom  
a1.00  
Fine adjustments (Manual Zoom)  
PICTURE MODE  
Press [21] while the menu is displayed.(Press and hold to alter faster.)  
–from k1.00 to k1.60 (in 0.01 units), from k1.60 to k2.00 (in 0.02 units)  
Picture Mode [RAM] [DVD-V] [VCD] [JPEG]  
GROUP  
Press [PICTURE MODE] to select the picture  
quality for movie viewing.  
Starting play from a selected group [WMA] [MP3] [JPEG]  
Functions  
A folder on WMA/MP3 and JPEG discs is treated as a “Group”.  
Normal:  
Normal images  
Picture Mode Normal  
1
2
While stopped, press [GROUP].  
Press [3 4] or the numbered buttons to select a  
group and press [ENTER].  
Cinema1:  
Mellows images and enhances detail in dark  
scenes.  
Functions  
Cinema2:  
Sharpens images and enhances detail in dark scenes.  
Group Search  
1
Animation: Suitable for animation  
Dynamic: Enhances the contrast for powerful images.  
10  
 
Changing soundtracks  
[DVD-V] (with multiple soundtracks) [RAM] [VCD]  
AUDIO  
QUICK REPLAY  
Quick replay (Only when the elapsed play time can be displayed)  
(Except iR/iRW)  
Press [AUDIO] to select the soundtrack.  
Press [QUICK REPLAY] to skip back a few seconds.  
This may not work depending on the discs recording.  
Functions  
Audio  
[RAM] [VCD]  
You can use this button to select “L, “R” or “LR”.  
[DVD-V] (Karaoke discs)  
Press [21] to select “On” or “Off” of vocals. Read the disc’s instructions for details.  
1
PLAY MODE  
Program/Random play [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]  
Signal type/data  
LPCM/Î Digital/DTS/MPEG: Signal type  
kHz (Sampling frequency)/bit/ch (Number of channels)  
Example: 3/2 .1ch  
While stopped, press [PLAY MODE].  
Program ---) Random---) Off (Normal play)  
^-------------------------------------------b  
.1: Low frequency effect  
(not displayed if there is no signal)  
0: No surround  
Disable HighMAT disc play to use random and program play. Select “Play as Data  
Disc” in Other Menu (page 15).  
1: Mono surround  
2: Stereo surround (left/right)  
1: Center  
Program play (up to 32 items)  
1
Press the numbered buttons to select the  
items (page 9, Enter number).  
Repeat this step to program other items.  
Press [1] (PLAY).  
2: Front leftiFront right  
e.g. [DVD-V]  
3: Front leftiFront rightiCenter  
Choose a title and chapter.  
Title Chapter  
No.  
1
Time  
Changing subtitles [DVD-V] (with subtitles) [VCD] (SVCD only)  
1
Play  
SUBTITLE  
2
Clear  
[RAM] (On/Off only with discs that contain subtitle on/off information)  
Clear all  
Selecting all the items (on the disc or in the title or group)  
Press [ENTER] and [3 4] to select “ALL, then press  
[ENTER] again to register.  
[DVD-V] [VCD]  
Press [SUBTITLE] to select the subtitle language.  
On iR/iRW, a subtitle number may be shown for subtitles that  
are not displayed.  
Functions  
Changing the program  
Press [3 4] to select an item.  
To change an item, repeat step 1.  
Subtitle  
Off  
To clear/display the subtitles  
Press [2 1] to select “On” or “Off”.  
To clear an item, press [CANCEL] (or select “Clear” and press [ENTER]).  
[RAM]  
Press [ANGLE/PAGE] to skip page by page.  
Press [SUBTITLE] to select “On” or “Off”.  
Clearing the whole program  
Subtitle on/off information cannot be recorded using Panasonic DVD Recorders.  
Select “Clear all” and press [ENTER]. The whole program is also cleared when the unit  
is turned off or the disc tray is opened.  
Angle select [DVD-V] (with multiple angles)  
ANGLE/PAGE  
e.g. [DVD-V]  
Random play  
Still picture rotation [JPEG]  
Random Playback  
1
[DVD-V] [WMA] [MP3] [JPEG] Press the numbered  
buttons to select a group or a title (page 9,  
Enter number).  
Press [ANGLE/PAGE] to select the angle or rotate the  
e.g. [DVD-V]  
Choose a title.  
Title  
1
still picture.  
Functions  
to start  
PLAY  
0
~
9
to select  
2
Press [1] (PLAY).  
Angle  
1/4  
To exit the program or random mode  
Press [PLAY MODE] several times while stopped.  
 
11  
Using navigation menus  
Playing WMA/MP3/JPEG discs [WMA] [MP3] [JPEG]  
TOP MENU  
MENU  
You can play JPEG files on DVD-RAM or play HighMAT discs without using the HighMAT function (page 15, “Play as Data Disc” in Other Menu).  
Using the submenu  
Playing items in order (Playback Menu)  
1
2
3
Press [MENU].  
Press [FUNCTIONS].  
Press [3 4] to select an item and press [ENTER].  
While the menu is displayed  
Playback Menu  
All  
Press [3 4] to select  
“All”, “Audio” or “Picture”  
WMA/MP3/JPEG  
Total 434  
WMA/MP3  
JPEG  
Audio  
Total 7  
Groups and content  
Content only  
Groups only  
and press [ENTER].  
To display/exit the screen,  
press [TOP MENU].  
Multi  
List  
Tree  
Picture  
Total 427  
Thumbnail images [JPEG]  
To the next group  
Thumbnail  
Next group  
Previous group  
to select and press ENTER  
Playing from the selected item (Navigation Menu)  
To the previous group  
1
2
3
Press [MENU].  
WMA/MP3 and JPEG  
WMA/MP3 only  
JPEG only  
All  
Audio  
Picture  
Press [3421] to select the group and press [ENTER].  
To play content in the group in order  
Press [ENTER].  
To start play from the selected content  
Press [34] to select and press [ENTER].  
To switch between guide messages and the elapsed play time indicator  
To search by a content or group title (see below)  
Help display  
Find  
Searching by a content or group title  
Group and content number currently playing  
N
avigation  
M
enu  
JPEG  
5
1
Press [MENU].  
002 My favorite2 005 Japanese 001 Lady Starfish  
:JPEG  
Press [2 1] to highlight a group title to search a group, or a content title to search  
Perfume  
001 My favorite1  
002 My favorite2  
001 Brazilian  
002 Chinese  
003 Czech  
001 Lady Starfish  
002 Metal Glue  
its content.  
003 Life on Jupiter  
004 Starperson  
2
3
Press [FUNCTIONS].  
Press [3 4] to select “Find” and  
:WMA/MP3  
004 Hungarian  
005 Japanese  
006 Mexican  
007 Philippine  
008 Swedish  
009 Piano  
¢
A
Find  
press [ENTER].  
010 Vocal  
4
Press [3 4] to select a character and  
Group 005/023  
Content 0001/0004  
RETURN to exit  
press [ENTER].  
Repeat to enter another character.  
Lower case is also searched.  
Number currently selected  
FUNCTIONS  
to display the sub menu  
Group  
Content  
Press [6 5] to skip between A, E, I, O and U.  
Press [2] to erase a character.  
Erase the asterisk (¢) to search for the titles starting with that character.  
Press [ANGLE/PAGE] to skip page by page.  
To listen to WMA/MP3 while showing a JPEG image on the screen  
Select a JPEG first, and then select WMA/MP3.  
(The opposite order is not effective.)  
5
6
Press [1] to select “Find” and press [ENTER].  
The search result screen appears.  
To exit the screen, press [MENU].  
Press [3 4] to select the content or group and press [ENTER].  
 
12  
PLAY LIST  
DIRECT NAVIGATOR  
Playing CD [CD]  
Playing RAM discs [RAM]  
MENU  
Titles appear with CD text playback.  
Titles appear only if you have entered them.  
You cannot edit play lists and titles.  
e.g. CD text  
CD Text  
1/23  
2
01  
1
2
Press [MENU].  
Press [3 4] to select the  
track and press [ENTER].  
Disc Title:  
Disc Artist:  
Track Title:  
All By Artist  
Pink Island  
Long John Platinum  
Track Artist: SHIPWRECKED  
Playing the programs  
1.  
2.  
3.  
4.  
Ashley at Prom  
City Penguin  
Formura one  
1
2
Press [DIRECT NAVIGATOR].  
Soccer  
Baseball  
5.  
6.  
Press [ANGLE/PAGE] to skip page by  
page.  
To exit the screen, press [MENU].  
Neanderthal  
Cartoons  
Trilobites  
White Dwarf  
Discovery  
7.  
8.  
Direct Navigator  
Press [3 4] or the numbered buttons  
to select the program.  
9.  
10.  
RETURN  
to exit  
to select and press  
ENTER  
Press [ANGLE/PAGE] to skip page by page.  
Press [FUNCTIONS] to switch between guide  
messages and the elapsed play time indicator.  
To select a 2-digit number  
e.g. 23: [S10] [2] [3]  
Press [1] to show the contents of the  
program.  
Date  
11/ 1(WED)  
On  
Contents  
No.  
T i t l e  
Monday feature  
1
2
3
4
5
0:05 AM  
1:05 PM  
2:21 PM  
3:37 PM  
11:05 AM  
1/  
2/  
3/  
1
2
3
(MON)  
(TUE)  
(WED)  
Auto action  
Cinema  
Music  
Playing HighMATTM discs [WMA] [MP3] [JPEG]  
4/10(THU)  
Baseball  
TOP MENU MENU  
0
9
to select  
RETURN to exit  
3
Press [ENTER].  
While the menu is displayed  
Press [3421] to select then press [ENTER].  
Playing a play list (Only when the disc contains a play list)  
Menu:  
Play list:  
Play starts.  
1
2
Press [PLAY LIST].  
Press [3 4] or the numbered buttons  
to select the play list.  
P l a y l i s t  
Takes you to the next menu which  
shows play lists or another menu.  
No. Date  
Length  
0:00:01  
T i t l e  
1
2
3
4
5
11/1  
City Penguin  
Ashley at Prom  
Formula one  
Soccer  
1/  
2/  
3/  
1
2
3
0:01:20  
1:10:04  
0:10:20  
0:00:01  
Press [ANGLE/PAGE] to skip page by page.  
4/10  
Baseball  
To return to the menu screen, press [TOP MENU] then press [RETURN] several times.  
6
4/11  
4/ 15  
4/ 17  
4/ 20  
4/22  
0:00:01  
0:01:10  
0:13:22  
0:05:30  
0:07:29  
City Penguin  
Ashley at Prom  
Formula one  
Soccer  
To select a 2-digit number  
e.g. 23: [S10] [2] [3]  
Press [ENTER].  
7
To change the menu background, press [FUNCTIONS].  
The background changes to the one recorded on the disc.  
To display/exit the screen, press [TOP MENU].  
8
9
10  
Baseball  
3
0
9
to select and press ENTER  
RETURN to exit  
Selecting from the list  
1
2
During play, press [MENU].  
P l a y l i s t  
All By Artist  
No.  
Pink Island  
Content title  
Press [2] then [3 4] to switch among  
“Playlist”, “Group” and “Content” lists.  
Press [1] then [3 4] to select an item  
and press [ENTER].  
1
2
3
4
5
6
Few times in summer  
Playlist  
Group  
Less and less  
And when was born  
I
Content  
Quatre gymnopedies  
You've made me sad  
3
I
can't quit him  
7
8
9
Evening glory  
Wheeling spin  
Velvet Cuppermine  
Press [ANGLE/PAGE] to skip page by page.  
10 Ziggy starfish  
To exit the screen, press [MENU].  
0
9
to select  
ENTER to play  
RETURN to exit  
13  
 
Using On-Screen Menus  
1
2
3
4
Select  
Go to the next  
menu  
Select  
1
4
7
2
5
8
0
3
6
RETURN  
FUNCTIONS  
ENTER  
ENTER  
9
Register  
Register  
10  
Return to the previous menu  
Select the menu.  
Press.  
Make the settings.  
Press to exit.  
Items shown differ depending on the type of software.  
Main menus  
Other Settings  
(page 10, Changing play speed)  
(page 10, Recalling recommended audio/video setting)  
Play Speed  
AV Enhancer  
To start from a specific item  
Program, Group, Title  
Chapter, Track  
Playlist, Content  
Play Menu  
To skip incrementally or decrementally§ (Time Slip for play only)  
(Only when the elapsed play time can be displayed, [JPEG] The Repeat and Marker  
1. Press [ENTER] twice to show Time Slip indicator.  
2. Press [3 4] to select the time and press [ENTER].  
Press and hold [3 4] to alter faster.  
functions can be used.)  
Time  
Select an item to be repeated.  
Repeat  
To start from a specific time§ (Time Search)  
To change remaining/elapsed time display  
To repeat a specified section  
Press [ENTER] at the starting and ending points.  
Press [ENTER] again to cancel.  
[RAM] (still picture part): Does not work.  
A-B Repeat  
(page 11, Changing soundtracks)  
To display the current bitrate or sampling frequency  
To show thumbnail images  
Audio  
To mark up to 5 positions to play again  
Thumbnail  
Subtitle  
(page 11, Changing subtitles)  
Press [ENTER] (The unit is now ready to accept markers.)  
To mark a position:  
[ENTER] (at the desired point)  
To recall a marker recorded on DVD-Video recorders  
(page 11, Angle select)  
Marker (VR)  
Angle  
To mark another position:[2 1] to select “¢[ENTER]  
Marker  
Except [RAM]  
To recall a marker:  
To erase a marker:  
[2 1] [ENTER]  
[2 1] [CANCEL]  
(page 11, Still picture rotation)  
Rotate Picture  
This feature doesn’t work during program and random play.  
Markers you add clear when you open the disc tray or switch the  
unit to standby.  
To turn on/off slideshow  
To change the slideshow timing (0–30 sec)  
Slideshow  
(right)  
Other  
(page 9, Reviewing titles/programs to play)  
Advanced  
Disc Review  
Settings  
§ Except iR/iRW  
14  
 
Picture Menu  
Picture Mode  
Other Menu  
Setup  
(page 10, Picture Mode)  
(page 16, Changing the player settings)  
480i (interlace) ,------. 480p (progressive)  
When you select “480p” and a confirmation screen appears, select  
Yes” only if connecting to a progressive output compatible  
television.  
Select “Play as Data Disc” to play JPEG files on DVD-RAM or  
to play a HighMAT disc without using the HighMAT function.  
Play as DVD-VR  
Play as HighMAT  
or  
Video Output  
Mode  
Play as Data Disc  
If you have chosen “480p”  
(
above), select the method of conversion  
for progressive output to suit the type of material.  
Auto1 (normal): Detects 24 frame-per-second film content and  
appropriately converts it.  
Auto2: Compatible with 30 frame-per-second film content in  
addition to 24 frame-per-second film content.  
Video: Select when using Auto1 and Auto2, and the video content  
is distorted.  
Transfer  
Mode  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D  
symbol are trademarks of Dolby Laboratories.  
Audio Menu  
“DTS” and “DTS 2.0 i Digital Out” are trademarks of Digital Theater Systems, lnc.  
(page 10, Enjoying virtual surround)  
Advanced Surround  
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed  
for limited viewing uses only.  
To make the dialogue in movies easier to hear  
[DVD-V] (Dolby Digital, DTS, 3-channel or over, with the dialogue  
recorded in the center channel)  
Dialogue  
Enhancer  
This product incorporates copyright protection technology that is protected by method  
claims of certain U.S. patents and other intellectual property rights owned by  
Macrovision Corporation and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
On ,------. Off  
(page 9, Enjoying clear sound)  
Sound Enhancement  
With AUDIO OUT connections (page 6)  
Switch on if sound is distorted.  
On ,------. Off  
Attenuator  
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.  
Display Menu  
HighMAT™ and the HighMAT logo are either trademarks or  
registered trademarks of Microsoft Corporation in the United  
States and/or other countries.  
Off, Date, Details  
0 to s60 (in 2 units)  
Auto, 0 to s7  
Information  
Subtitle Position  
Subtitle Brightness  
To select how to show images made for 4:3 aspect screens on  
a 16:9 aspect television  
Normal: Laterally stretches images.  
Windows Media, and the Windows logo are trademarks,  
or registered trademarks of Microsoft Corporation in the  
United States and/or other countries.  
4:3 Aspect  
Auto:  
The standard setting is “Shrink”. However this  
automatically changes to “Zoom” with a letterbox picture.  
Shrink: Images appear in the center of the screen.  
Zoom: Expands to 4:3 aspect ratio.  
WMA is a compression format developed by Microsoft  
Corporation. It achieves the same sound quality as MP3  
with a file size that is smaller than that of MP3.  
(page 10, Zoom)  
(page 10, Zoom)  
Off, On, Auto  
Just Fit Zoom  
Manual Zoom  
GUI See-through  
GUI Brightness  
s3 to r3  
15  
 
Changing the player settings  
1
2
3
4
5
Select  
Select  
Select  
1
4
7
2
5
8
0
3
6
SETUP  
SETUP  
ENTER  
ENTER  
ENTER  
9
Register  
Go right  
10  
Register  
Shows Setup menu.  
Select the tab.  
Select the item.  
Make the settings.  
Press to exit.  
The settings remain intact even if you switch the unit to standby.  
Underlined items are the factory preset.  
“Video” tab  
TV Aspect  
4:3 Pan&Scan: Regular aspect television (4:3)  
Choose the setting to The sides of the widescreen picture are cut off so  
The QUICK SETUP enables successive settings of the items in the shaded area.  
suit your television  
it fills the screen (unless prohibited by the disc).  
and preference.  
4:3 Letterbox: Regular aspect television (4:3)  
Widescreen picture is shown in the letterbox  
style.  
“Disc” tab  
Audio  
Choose the audio  
language.  
Subtitle  
Choose the subtitle  
language.  
Menus  
Choose the  
language for disc  
menus.  
Advanced Disc  
Review  
English  
Other¢¢¢¢  
French  
Spanish  
French  
Original§1  
Spanish  
§2  
16:9: Widescreen television (16:9)  
TV Type  
Select to suit the  
type of television.  
Standard (Direct View TV)  
LCD TV/Projector  
Plasma TV  
CRT Projector  
Projection TV  
Automatic§3 English  
Other¢¢¢¢  
§2  
Time Delay  
0ms  
20ms  
100ms  
40ms  
60ms  
§2  
English  
French  
Spanish  
Other¢¢¢¢  
When connected with an 80ms  
AV amplifier and Plasma  
display, adjust if you  
notice the audio is out of  
sync with the video.  
Changing the menu language from QUICK SETUP also  
changes this setting.  
Intro Mode: Reviews each title/program.  
Interval Mode: Reviews each 10 minutes.  
Still Mode  
Automatic  
Select how to review  
Specify the type of  
picture shown when  
paused.  
Field:  
The picture is not blurred, but picture quality is  
(➜  
page 9).  
lower.  
Ratings  
Set a ratings level to  
limit DVD-Video play. 0 Lock All: To prevent play of discs without ratings levels.  
Follow the on-  
Setting ratings (When level 8 is selected)  
8 No Limit  
Frame:  
Overall quality is high, but the picture may appear  
blurred.  
1 to 7  
Black Level Control Lighter: When connected through VIDEO OUT or  
When setting a ratings level, a password screen is shown.  
Follow the on-screen instructions.  
Do not forget your password.  
A message screen will be shown if a DVD-Video exceeding the  
ratings level is inserted in the unit. Follow the on-screen instructions.  
Change the black  
level of the picture if  
you connected a  
television through  
the COMPONENT  
VIDEO OUT  
S VIDEO OUT.  
Darker: When connected through COMPONENT VIDEO  
screen instructions.  
OUT.  
terminals.  
16  
 
§1  
§2  
§3  
The original language designed on the disc is selected.  
Input a code number referring to the table (below).  
If the language selected for “Audio” is not available, subtitles appear in that language  
(If available on the disc).  
“Audio” tab  
PCM Digital Output Up to 48 kHz: When connected to equipment compatible  
Check the digital input  
limitations of the  
equipment you  
connect using  
COAXIAL terminal and  
select the maximum  
sampling frequency of  
PCM digital output.  
with 44.1 or 48 kHz  
Up to 96 kHz: When connected to equipment compatible  
with 88.2 or 96 kHz  
Signals from copy-protected discs are converted to 48 or  
44.1 kHz.  
Some equipment cannot handle sampling frequencies of  
88.2 kHz, even if they can handle 96 kHz. Read your  
equipment’s operating instructions for details.  
Language code list  
Abkhazian:  
Afar:  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
Hausa:  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
Romanian:  
Russian:  
8279  
8285  
8377  
8365  
7168  
8382  
Hebrew:  
Hindi:  
Afrikaans:  
Albanian:  
Ameharic:  
Arabic:  
Samoan:  
Sanskrit:  
Hungarian:  
Icelandic:  
Indonesian:  
Interlingua:  
Irish:  
Scots Gaelic:  
Serbian:  
Dolby Digital  
Bitstream PCM  
Select “Bitstream” when the  
equipment can decode the  
bitstream (digital form of multi-  
channel data). Otherwise,  
select “PCM”. (If the bitstream  
is output to the equipment  
without a decoder, high levels  
of noise can be output and  
may damage your speakers  
and hearing.)  
Armenian:  
Assamese:  
Aymara:  
Serbo-Croatian: 8372  
Shona:  
Sindhi:  
8378  
8368  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
With COAXIAL  
Italian:  
connections (  
page 7)  
Azerbaijani:  
Bashkir:  
Japanese:  
Javanese:  
Kannada:  
Kashmiri:  
Kazakh:  
Kirghiz:  
Singhalese:  
Slovak:  
Slovenian:  
Somali:  
Spanish:  
Sundanese:  
Swahili:  
Swedish:  
Tagalog:  
Tajik:  
DTS Digital Surround  
Bitstream PCM  
Basque:  
With COAXIAL  
Bengali; Bangla: 6678  
connections (  
page 7)  
Bhutani:  
Bihari:  
Breton:  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
Korean:  
Kurdish:  
Laotian:  
Latin:  
Bulgarian:  
Burmese:  
Byelorussian:  
Cambodian:  
Catalan:  
Chinese:  
Corsican:  
Croatian:  
Czech:  
Dynamic Range  
Compression  
Off  
Latvian, Lettish: 7686  
Tamil:  
On:  
Adjusts for clarity even when the volume is low through  
compressing the range of the lowest sound level and  
the highest sound level. Convenient for late night  
viewing. (Only works with Dolby Digital)  
Lingala:  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8083  
7065  
8076  
8084  
8065  
8185  
Tatar:  
Lithuanian:  
Macedonian:  
Malagasy:  
Malay:  
Telugu:  
Thai:  
Tibetan:  
Tigrinya:  
Tonga:  
Turkish:  
Turkmen:  
Twi:  
Ukrainian:  
Urdu:  
Uzbek:  
Vietnamese:  
Volapük:  
Welsh:  
Wolof:  
Xhosa:  
Yiddish:  
Yoruba:  
Zulu:  
Danish:  
Dutch:  
Malayalam:  
Maltese:  
“Display” tab  
Menu Language  
English:  
Esperanto:  
Estonian:  
Faroese:  
Fiji:  
Maori:  
English  
On  
Français  
Off  
Español  
Marathi:  
Moldavian:  
Mongolian:  
Nauru:  
On-Screen Messages  
“Others” tab  
FL Dimmer  
Changes the brightness  
of the unit’s display.  
Auto Power Off  
Finnish:  
Nepali:  
French:  
Norwegian:  
Oriya:  
Bright  
Dim  
Frisian:  
Auto: The display is dimmed, but brightens only when you  
Galician:  
Georgian:  
German:  
Greek:  
Pashto, Pushto:  
Persian:  
perform some operations.  
Polish:  
On:  
The unit switches to standby mode after about 30  
minutes in the stop mode.  
Portuguese:  
Punjabi:  
Greenlandic:  
Guarani:  
Gujarati:  
Off  
Yes  
Quechua:  
Rhaeto-Romance: 8277  
QUICK SETUP  
No  
Re-initialize Setting Yes: The password screen is shown if “Ratings” (page 16)  
are set. Please enter the same password. After “INI” on  
the display disappears, turn the unit off and on again.  
This returns all values  
in the Setup menus to  
the default settings.  
No  
17  
 
Troubleshooting guide  
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to  
the “Customer Services Directory” on page 20 if you reside in the U.S.A., or refer to the “Product information” on page 4 if you reside in Canada. In other areas, consult your dealer  
for instructions. (Reference pages are shown in parentheses.)  
Power  
Subtitle position  
is wrong.  
Adjust the position. (“Subtitle Position” in Display Menu) (15)  
No power.  
Insert the AC power supply cord securely into the household  
AC outlet. (7)  
No subtitles.  
Display the subtitles. (11)  
The unit is  
When “Auto Power Off” is set to “On”, the unit automatically  
switches to standby after approximately 30 minutes in the  
stop mode. (17)  
The subtitles  
overlap closed  
captions recorded  
on discs.  
Clear the subtitles. (11)  
automatically  
switched to the  
standby mode.  
No operation  
In A-B repeat,  
point B is  
automatically set.  
The end of an item becomes point B when it is reached.  
No response  
when any buttons  
pressed.  
This unit cannot play discs other than the ones listed in  
these operating instructions. (5)  
The unit may not be operating properly due to lightning,  
static electricity or some other external factor. Turn the unit  
off and then back to ON. Alternatively, turn the unit off,  
disconnect the AC power supply cord, and then reconnect it.  
Condensation has formed: Wait 1 to 2 hours for it to  
evaporate.  
Repeat play is  
automatically  
canceled.  
A-B repeat is canceled when you press [QUICK REPLAY].  
Repeat play may be canceled when you press [CM SKIP] or  
[ADVANCED DISC REVIEW].  
Picture incorrect  
Picture distorted.  
Ensure that the unit is not connected through a video  
cassette recorder. (6)  
Make sure that progressive output has not been selected  
when the connected television is not progressive compatible.  
Press and hold [CANCEL] until the picture displays correctly.  
The settings will return to “480i”.  
No response  
when remote  
control buttons  
pressed.  
Check that the batteries are installed correctly. (7)  
The batteries are depleted: Replace them with new ones. (7)  
Point the remote control at the remote control sensor and  
operate. (8)  
No picture or  
sound.  
Check the video or audio connection. (6, 7)  
Check the power or input setting of the connected  
equipment.  
Picture size  
doesn’t fit the  
screen.  
Change “TV Aspect” in “Video” tab. (16)  
Use the television to change the aspect. If your television  
does not have that function, change “4:3 Aspect” in Display  
Menu. (15)  
Check that the DVD-RAM has something recorded on it.  
You have forgotten While stopped, press and hold [QUICK OSD] [DVD-S29] or  
your ratings  
password.  
Reset all the settings  
to Factory Preset.  
[ADVANCED DISC REVIEW] [DVD-S26] and [;] on the unit  
and then also press and hold [< OPEN/CLOSE] on the unit  
until “Initialized” disappears from the television. Turn the unit  
off and on again. All settings will return to the default values.  
Change the Zoom setting. (10)  
The television  
may display  
incorrectly or  
colors appear  
faded.  
Menu not  
displayed  
correctly.  
PAL discs cannot be played.  
Specific operation impossible or incorrect  
It takes time  
before play starts.  
[MP3]  
Play may take time to begin when an MP3 track has still  
picture data. Even after the track starts, the correct play time  
will not be displayed, however this is normal.  
Restore the zoom ratio to a1.00. (10)  
Set “Subtitle Position” in Display Menu to “0”. (15)  
Set “4:3 Aspect” in Display Menu to “Normal”. (15)  
Turn off TV’s zoom function.  
The program and  
random play  
functions do not  
work. [DVD-V]  
These functions do not work with some DVD-Videos.  
Auto zoom  
function does not  
work well.  
Use the other preset aspect ratios or manual adjustment. (10)  
Menu doesn’t  
appear. [VCD] with  
playback control  
Press [] twice and then press [1] (PLAY).  
Zoom function may not work well, especially in dark scenes  
and may not work depending on the type of disc.  
18  
 
Progressive video  
Unit displays  
“noPLAy”  
There is ghosting  
when progressive  
output is on.  
This problem is caused by the editing method or material  
used on DVD-Video, but should be corrected if you use  
interlace output. Change “Video Output Mode” in Picture  
Menu to “480i”. (15)  
You inserted a disc the unit cannot play; insert one it can. (5)  
You inserted a blank disc.  
You inserted a disc that has not been finalized. (5)  
“U11”  
The disc may be dirty. (21)  
Pictures not in  
progressive  
output.  
If the unit is connected to the television through VIDEO OUT  
or S VIDEO OUT, output will be interlace.  
“H∑∑”  
∑∑ stands for a  
number.  
Trouble may have occurred. The number following “H”  
depends on the status of the unit. Turn the unit off and then  
back to ON. Alternatively, turn the unit off, disconnect the AC  
power supply cord, and then reconnect it.  
If the service numbers fail to clear, note the service number  
and contact a qualified service person.  
Closed captions  
not displayed.  
When progressive output is on, closed captions will not be  
displayed.  
Sound incorrect  
Sound distorted.  
“nodISC”  
You haven’t inserted a disc: Insert one.  
You haven’t inserted the disc correctly: Insert it correctly. (8)  
Select “Off” in “Advanced Surround”. (10)  
Select “On” in “Attenuator” in Audio Menu if it causes  
distortion with AUDIO OUT connections. (15)  
Noise may occur when playing WMA files.  
Television displays  
/”  
The operation is prohibited by the unit or disc.  
Piercing noise  
comes from the  
speakers.  
If you have connected a digital amplifier which does not  
include decoder, be sure to select “PCM” in “Dolby Digital” or  
“DTS Digital Surround” in “Audio” tab. (17)  
“Cannot display  
group xx, content  
xx”  
You are trying to play incompatible groups or content. (5)  
Effects do not  
work.  
None of the audio effects work when the unit is outputting  
bitstream signals from the COAXIAL terminal. (7)  
Some audio effects do not work or have less effect with  
some discs.  
Advanced Surround and Sound Enhancement do not work if  
you have changed the play speed.  
“Check the disc”  
This disc may be dirty. (21)  
“This disc may  
not be played in  
your region”  
You can only play DVD-Video if their region number is “1”,  
“ALLor multiple region number including “1”. (5)  
No on-screen  
display.  
Select “On” in “On-Screen Messages” in “Display” tab. (17)  
No sound  
There may be a pause in sound when you change the play  
speed.  
Recording  
Cannot record to  
digital recording  
equipment.  
You cannot record WMA/MP3.  
You cannot record DVDs that have protection preventing  
digital recording.  
(Incorrect sound  
recorded.)  
You cannot record DVDs if the recording equipment cannot  
handle signals with a sampling frequency of 48 kHz.  
Make the following settings:  
– Advanced Surround:  
– PCM Digital Output:  
– Dolby Digital/DTS Digital Surround:  
Off (10)  
Up to 48 kHz (17)  
PCM (17)  
19  
 
Limited Warranty (ONLY FOR U.S.A.)  
Panasonic Consumer Electronics Company,  
Panasonic Puerto Rico, Inc.  
Division of Panasonic Corporation of North America  
Ave. 65 de Infantería, Km. 9.5  
One Panasonic Way Secaucus, New Jersey 07P09a4 nasonic DVD Player Limited Warranty  
San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
Limited Warranty Coverage  
Some states do not allow the exclusion or limitation of incidental or consequential damages, or  
limitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you.  
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer  
Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) will, for the  
length of the period indicated on the chart below, which starts with the date of original purchase (“Limited  
Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with  
a new or a refurbished product. The decision to repair or replace will be made by the warrantor.  
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from  
state to state. If a problem with this product develops during or after the Limited Warranty period, you  
may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to  
the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.  
Product or Part Name  
DVD Player  
Parts  
Labor  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR  
RESPONSIBILITY.  
One (1) Year  
Ninety (90) Days  
Rechargeable Batteries  
(in exchange for defective item)  
Customer Services Directory  
Ten (10) Days  
Not Applicable  
Obtain Product Information and Operating Assistance; locate your nearest Dealer or  
Servicenter; purchase Parts and Accessories; or make Customer Service and Literature  
requests by visiting our Web Site at:  
During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts”  
warranty period, there will be no charge for parts. You must mail-in your product during the warranty  
period. If non-rechargeable batteries are included, they are not warranted. This Limited Warranty only  
applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty  
is extended only to the original purchaser and only covers product purchased as new. A purchase  
receipt or other proof of original purchase date is required for Limited Warranty service.  
or, contact us via the web at:  
Mail-In Service  
You may also contact us directly at:  
For assistance in the continental U.S.A. in obtaining repairs please ship the product to:  
1-800-211-PANA (7262),  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.  
Panasonic Services Company  
Customer Servicenter  
Suite B  
For hearing or speech impaired TTY users, TTY: 1-877-833-8855  
4900 George McVay Drive  
McAllen, TX 78503  
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910.  
Accessory Purchases  
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the  
original carton. Include a letter detailing the complaint and provide a day time phone and/or email  
address where you can be reached.  
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by  
visiting our Web Site at:  
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE  
REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF  
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR  
THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.  
or, send your request by E-mail to:  
You may also contact us directly at:  
Limited Warranty Limits And Exclusions  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)  
Panasonic Services Company  
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT  
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER  
damages which occurred in shipment, or failures which are caused by products not supplied by the  
warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication,  
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper  
maintenance, power line surge, lightning damage, modification, or commercial use (such as hotel, office,  
restaurant, or other business), rental use of the product, or service by anyone other than a Factory  
Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.  
20421 84th Avenue South, Kent, WA 98032  
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)  
For hearing or speech impaired TTY users, TTY : 1-866-605-1277  
Service in Puerto Rico  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY  
COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH  
OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove  
or re-install an installed unit if applicable, travel to and from the servicer, loss of or damage to media or  
images, data or other recorded content. The items listed are not exclusive, but are for illustration only.)  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF  
Panasonic Puerto Rico, Inc.  
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
Phone (787)750-4300, Fax (787)768-2910  
F1104  
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.  
20  
 
Limited Warranty (ONLY FOR CANADA)  
Panasonic Canada Inc.  
5770 Ambler Drive, Mississauga, Ontario L4W 2T3  
PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY  
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect, or at its option, replace the product for a period as stated below from  
the date of original purchase.  
Technics Audio Product  
Panasonic Audio & DVD Product  
Accessories including rechargeable batteries  
One (1) year, parts and labour  
One (1) year, parts and labour  
Ninety (90) days  
LIMITATIONS AND EXCLUSIONS  
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage for which the product was not designed, misused or abused,  
damaged during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell  
batteries are also excluded from coverage under this warranty.  
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required before warranty service is performed.  
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE.  
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.  
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be  
applicable.  
WARRANTY SERVICE  
For product operation and information assistance, please contact your Dealer or our Customer Care Centre at: Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca  
For product repairs, please contact one of the following:  
Your Dealer who will inform you of an authorized Servicentre nearest you.  
A Panasonic Factory Servicentre listed below:  
Richmond,  
Calgary, Alberta  
Mississauga, Ontario  
Lachine, Québec  
British Columbia  
Panasonic Canada Inc.  
12111 Riverside Way  
Richmond, BC  
Panasonic Canada Inc.  
6835-8 St. N. E.  
Calgary, AB  
T2E 7H7  
Panasonic Canada Inc.  
5770 Ambler Dr.  
Mississauga, ON  
L4W 2T3  
Panasonic Canada Inc.  
3075, rue Louis A. Amos  
Lachine, QC  
th  
V6W 1K8  
H8T 1C4  
Tel: (604) 278-4211  
Fax: (604) 278-5627  
Tel: (403) 295-3955  
Fax: (403) 274-5493  
Tel: (905) 624-8447  
Fax: (905) 238-2418  
Tel: (514) 633-8684  
Fax: (514) 633-8020  
IF YOU SHIP THE PRODUCT TO A SERVICENTRE  
Carefully pack and send prepaid, adequately insured and preferably in the original carton.  
Include details of the defect claimed, and proof of date of original purchase.  
Maintenance  
Clean this unit with a soft, dry cloth  
Never use alcohol, paint thinner or benzine to clean this unit.  
Clean discs  
Wipe with a damp cloth and then wipe dry.  
Before using chemically treated cloth, read the instructions that came with the cloth carefully.  
Cleaning of the lens is generally not necessary although this depends on the  
operating environment.  
Do not use commercially available lens cleaners as they may cause malfunction.  
21  
 
Specifications  
Referencia rápida en español  
Signal system:  
Operating temperature range:  
NTSC  
95 F)  
Pickup:  
Wave length:  
Conexión a un televisor  
Televisor  
i5 to  
i
35  
oC (  
i
41 to  
i
x
662 nm/785 nm  
[U.S.A.] CLASS IIa/CLASS I  
[Others] CLASS 2/CLASS 3A  
[U.S.A.\and\Canada] AC 120 V, 60 Hz  
[Others] AC 110–240 V, 50/60 Hz  
9 W  
Operating humidity range: 5 to 90 % RH (no condensation)  
Discs played [8 cm (3 z) or 12 cm (5 z)]:  
(1) DVD (DVD-Video)  
Laser power:  
Power supply:  
(2) DVD-RAM (DVD-VR, JPEG§4, 5  
(3) DVD-R/RW (DVD-Video)  
)
AUDIO IN  
VIDEO  
IN  
R
L
Power consumption:  
Power consumption in standby mode: approx. 1 W  
Dimensions (WkDkH):  
(4)  
iR/RW (Video)  
(5) CD, CD-R/RW [CD-DA, Video-CD, SVCD§1  
,
Cable de audio/  
vídeo (incluido)  
430 mmk248 mmk43 mm  
(16 15/16zk9 12/16zk1 11/16z)  
approx. 2.14 kg (4.7 lb)  
MP3§2, 5, WMA§3, 5, JPEG§4, 5, HighMAT Level 2  
(Audio and Image)]  
Mass:  
Video output:  
Output level:  
1 Vp-p (75 )  
Pin jack  
[Note]  
Output connector:  
Number of connectors:  
S-video output:  
Specifications are subject to change without notice. Mass  
and dimensions are approximate.  
1 system  
Y output level:  
C output level:  
Output connector:  
Number of connectors:  
Component video output:  
Y output level:  
1 Vp-p (75 )  
0.286 Vp-p (75 )  
S terminal  
§1  
Conforming to IEC62107  
Compatible compression rate: between 32 kbps and  
§2  
320 kbps  
1 system  
480p/480i)  
§3  
Compatible compression rate: between 48 kbps and  
(
1 Vp-p (75 )  
0.7 Vp-p (75 )  
0.7 Vp-p (75 )  
Parte posterior del aparato  
A una toma de CA  
320 kbps  
Exif Ver 2.1 JPEG Baseline files  
P
P
B
output level:  
output level:  
§4  
R
Picture resolution: between 320k240 and 6144k4096  
Output connector: Pin jack (Y: green, PB: blue, PR: red  
)
pixels (sub sampling is 4:2:2 or 4:2:0)  
The total combined maximum number of recognizable  
Number of connectors:  
Audio output:  
1 system  
§5  
audio and picture contents and groups: 4000 audio  
and picture contents and 400 groups.  
Output level:  
Output connector:  
Number of connectors:  
Audio performance:  
(1) Frequency response:  
DVD (linear audio):  
2 Vrms (1 kHz, 0 dB)  
Pin jack  
2 channel: 1 system  
Cable de alimentación  
de CA (incluido)  
4 Hz–22 kHz (48 kHz sampling)  
4 Hz–44 kHz (96 kHz sampling)  
4 Hz–20 kHz  
L
CD Audio:  
(2) S/N ratio:  
R
AC IN  
CD Audio:  
115 dB  
(3) Dynamic range:  
DVD (linear audio):  
CD Audio:  
100 dB  
98 dB  
Conecte el cable de alimentación de CA el último.  
(4) Total harmonic distortion:  
CD Audio:  
Digital audio output:  
0.0025 %  
Pin jack  
Coaxial digital output:  
22  
 
Hasta 5 pasos  
Pulse [1] (PLAY) para reiniciar la  
reproducción.  
[VCD] Cámara lenta, en sentido de  
avance solamente  
Búsqueda  
(durante la  
PREPARACIÓN RÁPIDA  
Encienda el televisor y seleccione la entrada de vídeo apropiada en el mismo.  
SLOW/SEARCH  
reproducción)  
Encienda.  
Cámara lenta  
1
(durante la pausa)  
Muestra la pantalla QUICK SETUP.  
[RAM] También puede saltar a  
marcadores.  
SETUP  
SKIP  
2
Salto  
Pulse [3 4] para seleccionar  
3
RETURN  
“Español” y pulse [ENTER].  
Salto de grupo  
[WMA] [MP3] [JPEG]  
ENTER  
ENTER  
Siga el mensaje y haga los ajustes.  
[VCD] Sentido de avance solamente  
Pulse para terminar PREPARACIÓN  
Cuadro a  
4
ENTER  
RÁPIDA.  
cuadro  
ENTER  
(durante la pausa)  
[RAM] [DVD-V] [VCD]  
Pulse para salir.  
SETUP  
5
Seleccionar  
Selección de  
elemento en  
pantalla  
Vuelta a la  
RETURN  
Reproducción básica  
ENTER  
pantalla  
anterior  
Registrar  
Encienda.  
1
2
(
Aparato principal)  
[RAM] [DVD-V] [VCD] [CD]  
1
4
7
2
5
8
0
3
6
Ej.: Para seleccionar 12:  
Abra la bandeja del disco.  
[S10] [1] [2]  
Introducción  
de números  
OPEN/CLOSE  
ENTER  
[WMA] [MP3] [JPEG]  
Ej.: Para seleccionar 123:  
9
(Aparato principal)  
10  
[1]  
[2]  
[3]  
[ENTER]  
Introduzca el disco.  
3
4
[DVD-V]  
DIRECT NAVIGATOR  
PLAY  
Inicie la reproducción.  
Muestra un menú inicial de disco  
[RAM]  
Reproduce los programas.  
(Aparato principal)  
TOP MENU  
PLAY LIST  
[DVD-V]  
La posición se memoriza cuando “!”  
parpadea en el visualizador.  
Pulse [1] (PLAY) para proseguir.  
Pulse [] para borrar la posición.  
Menú del  
disco  
STOP  
Muestra un menú del disco  
Parada  
[RAM]  
Reproduce una lista de reproducción.  
MENU  
[VCD] con control de reproducción  
Muestra un menú del disco  
Pulse [1] (PLAY) para reiniciar la  
reproducción.  
PAUSE  
RETURN  
Pausa  
23  
 
Main feature index  
(Reference pages are shown in parentheses.)  
Displays current playback  
condition (9)  
Changes the unit’s display (9)  
QUICK OSD  
ADVANCED  
FL SELECT OPEN/CLOSE  
AV  
ADVANCED  
DISC REVIEW ENHANCER SURROUND  
To enjoy virtual surround (10)  
Reviews titles/programs  
to play (9)  
SOUND  
ENHANCEMENT  
1
4
2
5
8
0
3
6
To enjoy clear sound (9)  
PICTURE MODE  
CM SKIP  
Recalls recommended  
audio/video setting (10)  
To select the preset picture  
quality (10)  
7
CANCEL  
9
Skips a minute forward (10)  
QUICK REPLAY  
10  
Skips back a few seconds (11)  
SKIP  
SLOW/SEARCH  
STOP  
PAUSE  
PLAY  
Shows a disc top menu (9)  
or program list (13)  
This manual was printed with soy based ink.  
DIRECT NAVIGATOR  
TOP MENU  
PLAY LIST  
MENU  
Shows a disc menu (9, 12, 13)  
or play list (13)  
[U.S.A.\and\Canada\  
Shows On-Screen Menus (14)  
ENTER  
§
As an ENERGY STAR® Partner,  
FUNCTIONS  
RETURN  
Panasonic has determined that  
this product meets the ENERGY STAR®  
guidelines for energy efficiency.  
Changes angles or rotates  
still pictures (11)  
Changes subtitles (11)  
SUBTITLE AUDIO ANGLE/PAGE SETUP  
Changes soundtracks (11)  
Program/random play (11)  
PLAY MODE PLAY SPEED ZOOM  
GROUP  
§For Canada only: The word “Participant” is used in place of the  
word “Partner”.  
Selects groups to play (10)  
Changes play speed (10)  
Changes the zoom ratio (10)  
[U.S.A.]  
[Canada]  
pr  
Panasonic Puerto Rico, Inc.  
Panasonic Consumer Electronics Company,  
Division of Panasonic Corporation of North America  
One Panasonic Way Secaucus, New Jersey 07094  
Panasonic Canada Inc.  
Ave. 65 de Infantería, Km. 9.5  
5770 Ambler Drive, Mississauga, Ontario L4W 2T3  
San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
\Others]  
Panasonic Marketing Europe G.M.B.H. Wiesbaden  
N. (a Division of Panasonic Marketing G.M.B.H.)  
Military Sales Department  
6200 Wiesbaden-Biebrich, Hagenauerstr.  
43 Germany  
Matsushita Electric Industrial Co., Ltd. Corporate  
Management Division for the Americas  
Sales Office for North America  
Tokyo Panasonic Sales Section  
32nd Floor, World Trade Center 4-1, Hamamatsu-cho,  
2-Chome, Minato-Ku, Tokyo 105-6132, Japan  
RQT8218-P  
C 2005 Matsushita Electric Industrial Co., Ltd.  
Printed in China  
F0405AK0  
 

Miele Freezer F 12020 S User Manual
Miller Electric Welder FCAW SS User Manual
MSi Computer Hardware MS 6590 User Manual
MTD Edger 24596 8 User Manual
MXL Ventilation Hood USB007 User Manual
NEC Computer Monitor R 37 Xtra User Manual
Nielsen Kellerman GPS Receiver ClearNav User Manual
Nokia Satellite TV System 120T User Manual
Onkyo Stereo Receiver HT R518 User Manual
Panamax Power Supply MAX 5510 User Manual