91VX SAW CHAIN
Oregon® 91VX saw chain features top performing Chamfer Chisel™ cutters.
The twin corners of the cutters on 91VX chain deliver superior performance
on the many popular saws which use low-profile 3/8"-pitch chain.
CHAIN PITCH AND GAUGE
PITCH
3/8”
GAUGE
91VX
.050”
KICKBACK – ANSI CLASSIFICATION
91VX saw chain may be capable of
kickback that could result in serious
injury to the saw operator or bystand-
ers. Do not use this saw chain unless
you have experience and specialized
training for dealing with kickback.
Saw chain with reduced kickback
potential is available.
Features
Benefits
Advanced geometry grind
•
•
Improved out-of-box grind
Dramatic speed improvements in all cut-
ting modes
RECOMMENDED TYPES OF USE
•
•
Extreme cutting efficiency, less feed force
required
Chamfer Chisel™ cutters with
special shaped low-vibration
heels
Twin cutting corners offering outstanding
performance, durability and easy mainte-
nance
Commercial
•
•
Less vibration than competitive chains
RECOMMENDED SAW SIZES
Ramp-shaped depth gauges
Blued cutters
The ramp-shape reduces kickback ener-
gies without affecting performance
•
•
Superior corrosion resistance
Base-cutter hardness consistency
91 VX is intended for use with elec-
tric saws and smaller gasoline-pow-
ered saws up to 2.5 cu. in. (41cc)
Sharpens with standard 5/32"
round file and file guide
•
Easy hand maintenance
Vibe-Ban™
•
Reduces vibration 25% or more at the saw
handle
RECOMMENDED BAR LENGTHS
LubriLink™
•
•
Help keep oil where it’s needed - on the
chain
Directs oil to the critical rivet flange/hole
interface
10 in. to 18 in. (25 to 46 cm)
Lubriwell™
•
•
Help carry oil around the full length of the
guide bar’s groove
Enhances lubrication of the bar nose
sprocket and bearings
KICKBACK-REDUCING FEATURES
Ramp-shaped
depth gauges
on each cutter
CUTTER SEQUENCE
Standard sequence: 91VX
91VX F&B
A107040
AB
0807
|