42-5073.fm Page 1 Thursday, August 12, 1999 11:08 AM
Cat. No. 42-5073/42-5074
OWNER’S MANUAL
Please read before using this equipment.
Portable Compact Disc Player
CD-3620 (42-5073)
CD-3640 (42-5074)
42-5073.fm Page 3 Thursday, August 12, 1999 11:08 AM
Hold — prevents accidentally chang-
ing the CD player’s control settings
and conserves battery life by locking
most controls when you turn off the
CD player.
The CD player’s advanced technology
makes it simple to operate. But, be
sure you read this Owner’s Manual
completely so you can take advantage
of all its advanced features.
Three Power Sources — let you
power your CD player from two stan-
dard or rechargeable nickel-cadmium
AA batteries, standard AC power (with
an optional AC adapter), or your vehi-
cle’s battery (with an optional DC
adapter).
We recommend you record the CD
player’s serial number here. The num-
ber is in the battery compartment.
Serial Number __________________
5- or 3-Inch CD Compatible
Important: You need a pair of stereo
headphones, amplified speakers, or a
home audio or car stereo system to
use your CD-3620/CD-3640. Your lo-
cal RadioShack store carries a com-
plete line of these items.
CDs that can be played on this player
have this mark on them:
3
42-5073.fm Page 4 Thursday, August 12, 1999 11:08 AM
CONTENTS
Power Sources ..................................................................................................... 5
Using Batteries ................................................................................................ 5
Installing Batteries ..................................................................................... 6
Using AC Power .............................................................................................. 7
Using Vehicle Battery Power ........................................................................... 8
Connections ......................................................................................................... 9
Connecting Earphones .................................................................................... 9
Listening Safely ......................................................................................... 9
Traffic Safety ............................................................................................. 9
Connecting Amplified Speakers .................................................................... 10
Connecting to a Home Audio System ............................................................ 10
Connecting to an Autosound System ............................................................ 10
Operation ............................................................................................................ 12
Playing a CD .................................................................................................. 12
Digital Anti-Shock System (DAS2) (CD-3640 only) ........................................ 13
Locking the Controls ...................................................................................... 14
Audible Search .............................................................................................. 14
Automatic Search Music System (ASMS) ..................................................... 14
Pause and Cue .............................................................................................. 14
Intro Scan ...................................................................................................... 15
Repeat Play ................................................................................................... 15
Random Play ................................................................................................. 16
Programmed Play .......................................................................................... 16
Troubleshooting ................................................................................................. 18
Care and Maintenance ....................................................................................... 19
CD Care Tips ................................................................................................. 20
FCC Information ............................................................................................ 20
Laser Safety .................................................................................................. 20
Specifications ..................................................................................................... 21
4
42-5073.fm Page 5 Thursday, August 12, 1999 11:08 AM
POWER SOURCES
You can power your CD player from:
• Two AA batteries
Cautions:
• Use only fresh batteries of the re-
quired size and recommended
type.
• Standard AC power, using an AC
adapter
• Do not mix old and new batteries,
different types of batteries (stan-
dard, alkaline, or rechargeable),
or rechargeable batteries of differ-
ent capacities.
• A vehicle’s battery power, using a
DC adapter
USING BATTERIES
All types of nickel-cadmium batteries
come fully discharged. Be sure to fully
charge the batteries before you use
them the first time.
You can power your CD player from
battery power using:
• Two AA alkaline batteries (such
as RadioShack Cat. No. 23-552)
Charging Tips
• Two special AA rechargeable
nickel-cadmium batteries (RSU
No. 11672508, available through
your local RadioShack store).
• It takes about 14 hours to charge
fully discharged nickel-cadmium
batteries in the CD player while it
is not being used to play CDs.
You can charge these batteries
while they are in the battery com-
partment using an AC or DC
adapter. (See “Using AC Power”
on Page 7 or “Using Vehicle Bat-
tery Power” on Page 8.)
• When the nickel-cadmium batter-
ies fully charge, unplug the
adapter from the AC outlet or cig-
arette-lighter socket, then discon-
nect the adapter from the CD
player.
• Two standard AA rechargeable
nickel-cadmium batteries (such
as Cat. No. 23-125).
• You can play a CD while recharg-
ing the special nickel-cadmium
batteries; however, this will cause
the batteries to recharge more
slowly.
Your CD player does not recharge
standard AA rechargeable batter-
ies inside its battery compartment,
but you can charge them with an
external battery charger (Cat. No.
23-133).
• Always keep the charging termi-
nals on the rechargeable batteries
clean. Use a cotton swab dipped
in alcohol to clean the terminals.
• Under normal usage conditions,
nickel-cadmium batteries can be
recharged about 500 times.
5
42-5073.fm Page 6 Thursday, August 12, 1999 11:08 AM
• Fully discharge the batteries occa-
sionally by playing the CD player
until it no longer plays. Then fully
recharge the batteries. This helps
restore the batteries’ full charging
capacity.
Installing Batteries
• Avoid charging the batteries in a
hot environment (above 113°F) as
this can permanently reduce the
batteries’ charging capacity.
1. Press down on the battery com-
partment cover and slide it away
from the CD player, then lift the
cover.
Caution: Do not overcharge the bat-
teries. Overcharging can significantly
reduce the batteries’ useful life.
2. Place two AA batteries in the com-
partment as indicated by the po-
larity symbols (+ and –) marked
inside.
Important: This CD player is capable
of using rechargeable nickel-cadmium
batteries. At the end of the batteries’
useful life, they must be recycled or
disposed of properly. Contact your lo-
cal, county, or state hazardous waste
management authorities for informa-
tion on recycling or disposal programs
in your area. Some options that might
be available are: municipal curb-side
collection, drop-off boxes at retailers
such as your local RadioShack store,
recycling collection centers, and mail-
back programs.
3. Close the battery compartment
cover.
Replace or recharge the batteries
when
flashes on the display, the
sound distorts, or the volume weak-
ens.
Cautions:
• Always dispose of old batteries
promptly and properly; do not burn
or bury them.
• If you do not plan to use the CD
player for a month or more, re-
move and store the batteries.
• Never leave dead, old, or weak
batteries in the CD player. Batter-
ies can leak chemicals that cor-
rode or damage electronic
circuits.
6
42-5073.fm Page 7 Thursday, August 12, 1999 11:08 AM
Follow these steps to use an AC
adapter.
USING AC POWER
You can power the CD player from a
standard AC outlet using an AC
adapter, such as Cat. No. 273-1664.
Cautions:
• You must use an AC adapter that
supplies 6 volts, and delivers at
least 400 milliamps (CD-3620) or
500 milliamps (CD-3640). Its cen-
ter tip must be set to positive, and
its barrel plug must correctly fit the
1. Attach the 4.0 mm outer diameter/
1.7 mm inner diameter barrel plug
to the adapter cord, matching + on
the plug with TIP on the cord.
DC IN 6V
CD player’s
jack. The
2. Set the adapter’s voltage switch to
6V.
recommended adapter meets
these specifications. Using an
adapter that does not meet these
specifications could damage the
CD player or the adapter.
3. Insert the adapter’s barrel plug
DC IN 6V
into the CD player’s
jack.
4. Plug the other end of the adapter
into a standard AC outlet.
• When you finish using the AC
adapter, disconnect it from the AC
outlet first, then unplug it from the
CD player.
• Battery power disconnects when
you connect an AC adapter to the
CD player unless you are using
special
rechargeable
nickel-
cadmium batteries (see “Using
Batteries” on Page 5). If you plan
to use the CD player with AC
power for an extended period of
time (8 hours or more), remove
the special nickel-cadmium batter-
ies to prevent overcharging.
7
42-5073.fm Page 8 Thursday, August 12, 1999 11:08 AM
• Battery power disconnects when
you connect a DC adapter to the
CD player unless you are using
USING VEHICLE
BATTERY POWER
special
rechargeable
nickel-
You can power your CD player from
your vehicle’s battery using a DC
adapter, such as Cat. No. 273-1801.
cadmium batteries (see “Using
Batteries” on Page 5). If you plan
to use the CD player with vehicle
battery power for an extended pe-
riod of time (8 hours or more), re-
move the special nickel-cadmium
batteries to prevent overcharging.
Cautions:
• You must use a DC adapter that
supplies 6 volts and delivers at
least 500 milliamps. Its center tip
must be set to positive, and its
barrel plug must correctly fit the
Follow these steps to use your vehi-
cle’s battery power.
DC IN 6V
CD player’s
jack. The
recommended adapter meets
these specifications. Using an
adapter that does not meet these
specifications can damage the CD
player or the adapter.
• Disconnect the adapter from the
cigarette-lighter socket when you
are not using it, to prevent the ve-
hicle’s battery from being drained.
1. Attach the 4.0 mm outer diameter/
1.7 mm inner diameter barrel plug
to the adapter cord, matching the
+ on the plug with TIP on the cord.
• Always disconnect the adapter
from the cigarette-lighter socket
before you unplug it from the CD
player.
2. Set the adapter’s voltage switch to
6V.
3. Insert the adapter’s barrel plug
• If you park your vehicle in the sun,
temperatures inside can easily
reach levels that could damage
your CD player and your CDs. To
prevent heat damage, avoid leav-
ing your CD player or CDs in your
vehicle.
DC IN 6V
into the CD player’s
jack.
4. Plug the other end of the adapter
into your vehicle’s cigarette-lighter
socket.
8
42-5073.fm Page 9 Thursday, August 12, 1999 11:08 AM
CONNECTIONS
You can listen to your CD player by
connecting optional stereo earphones
or amplified speakers to the player’s
PHONES jack, or by connecting a
home audio or car stereo system to
the player’s LINE OUT jack.
Listening Safely
To protect your hearing, follow these
guidelines when you use earphones.
• Set the volume to the lowest set-
ting before you begin listening. Af-
ter you begin listening, adjust the
volume to a comfortable level.
You can mount your CD player in your
car using a mounting bracket. Your lo-
cal RadioShack store has a complete
line of mounting kits.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to per-
manent hearing loss.
CONNECTING
EARPHONES
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage your
hearing.
For private listening, plug a pair of ste-
reo earphones with a 1/8-inch plug (not
supplied) into the CD player’s
PHONES jack.
Traffic Safety
Do not wear earphones while operat-
ing a motor vehicle or riding a bicycle.
This can create a traffic hazard and
could be illegal in some areas.
Even though some earphones let you
hear some outside sounds when lis-
tening at normal volume levels, they
still can present a traffic hazard.
9
42-5073.fm Page 10 Thursday, August 12, 1999 11:08 AM
CONNECTING
AMPLIFIED SPEAKERS
CONNECTING TO AN
AUTOSOUND SYSTEM
To listen to your CD player through a
pair of amplified speakers, plug the
speakers’ 1/8-inch plug into the CD
You can listen to your CD player
through your autosound system in one
of three ways.
PHONES
player’s
jack.
If your autosound system has LINE IN
jacks, connect the supplied Y-cable’s
1/8-inch plug to the CD player’s
LINE
OUT
jack. Then connect the Y-cable’s
phono plugs to your autosound sys-
tem’s LINE IN input jacks. (If the jacks
on your equipment do not match the
plugs on the cable, check with your lo-
cal RadioShack store for the proper
cable adapter.)
PHONES Jack
CONNECTING TO A
HOME AUDIO SYSTEM
To listen to your CD player through
your home audio system’s amplifier/
receiver and full-size speakers, con-
nect the supplied Y-cable’s 1/8-inch
LINE OUT
plug to the CD player’s
jack.
Auto Sound System with
Two LINE IN Jacks
Then connect the Y-cable’s phono
plugs to the CD, AUX, or TV audio
LEFT and RIGHT input jacks on your
amplifier/receiver. (If the jacks on your
equipment do not match the plugs on
the Y-cable, check with your local Ra-
dioShack store for the proper cable
adapter.)
Amplifier/Receiver with
LEFT and RIGHT Input Jacks
10
42-5073.fm Page 11 Thursday, August 12, 1999 11:08 AM
If your autosound system has a CD in-
put jack, you need a stereo /8-inch
If your autosound system has a cas-
sette player but no CD INPUT or LINE
IN jacks, you can use a CD-to-
cassette adapter, such as Cat. No. 12-
1951. Insert the cassette adapter into
your car’s cassette player just as you
would insert a regular cassette. Then
connect the CD-to-cassette adapter’s
cord to the CD player’s PHONES jack.
1
patch cable, such as Cat. No. 42-
2387. Connect one end to the CD
player’s LINE OUT jack and the other
end to the autosound system’s CD IN-
PUT jack.
Auto Sound System with
CD Input Jack
PHONES Jack
11
42-5073.fm Page 12 Thursday, August 12, 1999 11:08 AM
OPERATION
To display the current track’s
elapsed time, hold down MEM-
ORY/E-BASS until the elapsed
time appears. To return to the cur-
rent track number, hold down
MEMORY/E-BASS again until the
current track number appears.
PLAYING A CD
1. Set HOLD to OFF.
CD-3620 CD-3640
2. Press to open the disc compart-
ment. Then handling the CD by its
edges, carefully place it, label side
up, over the compartment’s center
hub. Press gently on the CD’s
center so the CD lies flat in the
compartment. Then close the
compartment cover.
4. Adjust the volume to a comfort-
able listening level.
• If you connected headphones,
amplified speakers, or a CD-to-
cassette adapter to the CD
player’s PHONES jack, set VOL-
UME on the CD player to the
desired level.
3. Press PLAY/PAUSE
. The CD
player automatically turns on, 00
flashes on the display, then Track
1 begins to play. The display
shows the current track number.
• If you connected the CD
player’s LINE OUT jack to your
home audio system or your
car’s stereo, use the volume
controls on those systems to
set the desired volume level.
12
42-5073.fm Page 13 Thursday, August 12, 1999 11:08 AM
• To enhance the bass sound,
briefly press MEMORY/E-BASS.
BASS appears. To return to nor-
mal sound, press MEMORY/E-
BASS again. BASS disappears.
center hub and lift the CD. Then
close the compartment cover.
DIGITAL ANTI-SHOCK
SYSTEM (DAS2)
(CD-3640 ONLY)
Your CD-3640 contains special cir-
cuits to overcome sound skipping
problems caused by shock or vibra-
tion. This means you can carry the CD
player anywhere you go or use it in
your vehicle. When you turn on the
anti-shock system, the CD player con-
tinuously saves the next few seconds
of music in memory. During a shock or
vibration that would normally make a
track skip or pause, the CD player
plays directly from memory.
5. When the last track finishes play-
ing, the display alternately shows
the total number of tracks and to-
tal playing time of the CD for
about 2 minutes, then the CD
player automatically turns off. To
stop play and turn off the CD
player sooner, press STOP/CLEAR
twice.
To turn on the anti-shock system, set
DAS on the left side of the CD player
to IN. If the CD player is playing a CD,
the sound briefly stops and DAS ap-
pears.
Notes:
• E-Bass turns off when the CD
player is turned off.
• If you press STOP during play,
the CD player exits INTRO,
RANDOM, and REPEAT play.
To turn off the anti-shock system, set
DAS to OUT. The sound briefly stops
and DAS disappears.
6. To remove the CD, press
to
open the disc compartment. Be
sure the CD has stopped spin-
ning, then press the tab in the
center of the disc compartment’s
13
42-5073.fm Page 14 Thursday, August 12, 1999 11:08 AM
Note: The CD player consumes addi-
tional battery power when you use the
anti-shock system. When you use the
CD player in a stable location, turn off
the system to conserve battery power.
AUTOMATIC SEARCH
MUSIC SYSTEM (ASMS)
You can use ASMS before or during
regular or programmed play (see “Pro-
grammed Play” on Page 16) to quickly
locate any track on a CD.
LOCKING THE
CONTROLS
While the CD is stopped, repeatedly
press
or
to move backward
To prevent accidentally turning the CD
player on or off, or changing the track
or forward to the desired track. Press
PLAY/PAUSE
to play the track.
to return to
HOLD
ON
you are listening to, slide
No controls work except
to
.
,
VOLUME
,
During play, press
DAS
HOLD
.
(CD-3640 only), and
the beginning of the current track.
Press again to return to the be-
HOLD OFF
trols again.
Slide
to
to operate the con-
ginning of the previous track. To move
to the beginning of the next track,
press
.
AUDIBLE SEARCH
PAUSE AND CUE
Use audible search during play to rap-
idly search forward or backward for a
specific section of a track. During au-
dible search, the CD plays at a lower
volume and a higher speed. The cur-
rent track’s elapsed time appears on
the display.
To temporarily pause play, press
PLAY/PAUSE
the display. Press
again to resume play.
.
flashes on
PLAY/PAUSE
PLAY/PAUSE
You can also use
to select (cue) a track before playing.
When the CD player is stopped, press
To search forward, hold down
To search backward, hold down
.
.
or
to select the track you
PLAY/
To resume normal play, release the
control.
want to cue. Then press
PAUSE
twice.
flashes.
14
42-5073.fm Page 15 Thursday, August 12, 1999 11:08 AM
To cue a track in a programmed se-
quence (see “Programmed Play” on
REPEAT PLAY
Page 16), press PLAY/PAUSE
to
Your CD player can repeatedly play a
single track, the entire CD, or a pro-
grammed sequence (see “Pro-
grammed Play” on Page 16).
pause the CD.
press or
you want to cue.
flashes. Then
to display the track
To play the cued track, press PLAY/
PAUSE
To repeat a single track, before or
during play, repeatedly press PLAY
.
MODE until
1 appears. At the end
of the track, the CD player repeatedly
plays it.
INTRO SCAN
The intro scan feature automatically
plays the first 10 seconds of each
track on a CD.
1
During play, repeatedly press PLAY
MODE until INTRO appears on the
display. Intro scan starts from the first
track.
To repeat an entire CD or a series of
programmed tracks, before or during
regular or programmed play, repeat-
To return to normal play, press PLAY
MODE so INTRO disappears from the
display. The CD player resumes nor-
mal play.
edly press PLAY MODE until
ALL
appears. When the CD player reaches
the end of the CD or the programmed
sequence, it returns to the first track
and continuously replays all the
tracks.
Notes:
• Intro scan plays the tracks in the
programmed order if you have
programmed a sequence (see
“Programmed Play” on Page 16).
ALL
• You can use
and
to
skip through the tracks.
To cancel repeat play, repeatedly
press PLAY MODE until
1 and
ALL disappear.
15
42-5073.fm Page 16 Thursday, August 12, 1999 11:08 AM
selection number advances by
one and the track number on the
display returns to 00.
RANDOM PLAY
In random play, the CD player plays
all the tracks once in random order,
then automatically stops. To start ran-
dom play at any time, repeatedly
5. Repeat Steps 3 and 4 for each
track you want to program, up to
24 tracks.
PLAY MODE
press
until RANDOM ap-
Note: When you store the 24th
track in memory, FuLL appears.
pears.
Note: If you select random play during
programmed play, the CD player
stops the programmed sequence and
starts random play of all tracks.
6. To play the programmed se-
PLAY/PAUSE
quence, press
.
PGM appears and the first track in
the sequence plays.
While the programmed sequence
PLAY
To cancel random play, press
MODE
plays, you can use
or
so RANDOM disappears.
to move forward or backward in
the sequence.
PROGRAMMED PLAY
7. After the last programmed track
ends, the CD player stops. To
manually stop the CD before the
You can program up to 24 tracks on a
CD to play in any order you choose,
and you can program the same track
to play more than once.
STOP/
end of the sequence, press
CLEAR
.
• To replay the programmed se-
PLAY/PAUSE
within 2 minutes.
quence, press
Follow these steps to program and
play a sequence.
• To check the programmed se-
PLAY/PAUSE
1. Press
the CD player, then press
CLEAR
to start
STOP/
MEMORY/E-
quence, press
BASS
within 2 minutes. The dis-
.
play shows the number of the
first programmed track. Each
MEMORY/E-BASS
2. Hold down
until
the selection number (01) and the
track number (00) appear as PGM
flashes.
MEMORY/E-
time you press
BASS
, the display shows the
number of the next track in the
sequence.
3. Repeatedly press either
or
to display the number of the
first track you want to program.
MEMORY/E-BASS
4. Press
to store
the selected track number. The
16
42-5073.fm Page 17 Thursday, August 12, 1999 11:08 AM
• To add to the end of a pro-
grammed sequence, hold down
MEMORY/E-BASS until the first
programmed track appears,
then repeatedly press MEM-
ORY/E-BASS (within 2 minutes)
until track number 00 appears.
Then follow Steps 3 and 4.
If you do not press a button within
2 minutes after the CD player
stops, it turns off and clears the
programmed sequence.
To clear the programmed se-
quence sooner, press STOP/
CLEAR
twice.
17
42-5073.fm Page 18 Thursday, August 12, 1999 11:08 AM
TROUBLESHOOTING
With proper care and handling, your CD player should give you years of trouble-
free service. However, if your CD player is not working properly, follow these sug-
gestions to see if you can eliminate the problem. If you still have a problem, take
the CD player to your local RadioShack store for assistance.
Problem
Possible Cause
Suggestion
Operation controls do
not work.
Hold function is active.
No power.
Set HOLD to OFF.
Check the batteries or
adapter.
CD is loaded, but it does CD is loaded upside
Reload the CD, label side
up.
not start.
down.
CD is dirty.
Clean the CD or try a differ-
ent CD. See “CD Care Tips”
on Page 20.
The sound skips.
CD is dirty or scratched. Clean the CD or try a differ-
ent CD. See “CD Care Tips”
on Page 20.
Vibration is heavy.
Try not to vibrate the CD
player.
Try activating the anti-shock
system. (CD-3640 only)
Moisture condenses on Wait 1 hour for the moisture
the pickup lens. to evaporate.
18
42-5073.fm Page 19 Thursday, August 12, 1999 11:08 AM
CARE AND MAINTENANCE
Your Optimus CD-3620/CD-3640 Portable Compact Disc Player is an example of
superior design and craftsmanship. The following suggestions will help you care for
your CD player so you can enjoy it for years.
Keep the CD player dry. If it gets wet, wipe it dry immediately. Liquids
might contain minerals that can corrode the electronic circuits.
Use and store the CD player only in normal temperature environ-
ments. Temperature extremes can shorten the life of electronic de-
vices, damage batteries, and distort or melt plastic parts.
Keep the CD player away from dust and dirt, which can cause prema-
ture wear of parts.
Handle the CD player gently and carefully. Dropping it can damage
circuit boards and cases and can cause the CD player to work im-
properly.
Use only fresh batteries of the required size and type. Old batteries
can leak chemicals that damage your CD player’s electronic parts.
Wipe the CD player with a damp cloth occasionally to keep it looking
new. Do not use harsh chemicals, cleaning solvents, or strong deter-
gents to clean the CD player.
Modifying or tampering with the CD player’s internal components can cause a mal-
function and might invalidate your CD player’s warranty and void your FCC authori-
zation to operate it. If your CD player is not performing as it should, take it to your
local RadioShack store for assistance.
19
42-5073.fm Page 20 Thursday, August 12, 1999 11:08 AM
CD CARE TIPS
FCC INFORMATION
• Do not place anything but a CD in
the disc tray. Doing so can dam-
age the drive mechanism.
This equipment complies with the lim-
its for a Class B digital device as spec-
ified in Part 15 of FCC Rules. These
limits provide reasonable protection
against radio and TV interference in a
residential area. However, your CD
player might cause TV or radio inter-
ference even when it is operating
properly. To eliminate interference,
you can try one or more of the follow-
ing corrective measures:
• During playback, a severe shock
or jolt could make the CD’s rota-
tion speed change suddenly and
produce some noise. This is not a
malfunction.
• Always handle a CD by the edges
and keep it in its protective case
or sleeve when it is not in use.
Fingerprints and scratches on the
CD’s surface can prevent the la-
ser beam from correctly reading
the digital information. To clean
the CD, use a CD cleaner kit (Cat.
No. 42-226).
• Increase the distance between the
CD player and the radio or TV.
• Use outlets on different electrical
circuits for the CD player and the
radio or TV.
• Consult your local RadioShack
store if the problem still exists.
• A scratch on the CD’s surface can
make the CD skip or stop playing.
If the CD gets scratched, use
Scratch ’n Fix (Cat. No. 42-127) to
repair the scratch.
LASER SAFETY
This unit employs a laser. Only quali-
fied service persons should remove
the cover or attempt to service this de-
vice, due to possible eye injury.
• Keep CDs dry. A water drop can
act as a lens and affect the laser
beam focus.
Warning: The use of controls or ad-
justments or the performance of pro-
cedures other than specified herein
can result in hazardous exposure to
laser light.
20
42-5073.fm Page 21 Thursday, August 12, 1999 11:08 AM
SPECIFICATIONS
Audio
Frequency Response (±3 dB) ............................................................ 20–20,000 Hz
Dynamic Range .............................................................................................. 80 dB
Signal-to-Noise Ratio ...................................................................................... 80 dB
Harmonic Distortion at 1 kHz ......................................................................... 0.07%
Separation at 1 kHz ........................................................................................ 70 dB
Wow/Flutter .................................................................................... Not Measurable
Headphones Output (10% THD at 32 ohm) ..................................... 6 mW + 6 mW
Line Output ...................................................................................................... 0.6 V
Disc
Diameter ............................................................... Standard 5-Inch and 3-Inch CDs
Signal Format
Sampling Frequency .................................................................................. 44.1 kHz
Oversampling ............................................................................................. 8 Times
Quantization Number ............................................................ 16-Bit Linear/Channel
Transmission Bit Rate ............................................................... 4.3218 Mb/Second
Signal-Processing Rate ........................................................................... 352.8 kHz
Pick-Up
Tracking System ........................................................ 3-Beam Tracking Servo Type
Object Lens Drive System .......................................... 2-Dimensional Parallel Drive
Optical Source ....................................................................... Semiconductor Laser
Wavelength .................................................................................................. 780 nm
21
42-5073.fm Page 22 Thursday, August 12, 1999 11:08 AM
General
Power Requirements ................................................ DC 3V; Two AA Size Alkaline
or Special Rechargeable Nickel-Cadmium Batteries (Not Supplied),
Optional AC Adapter (273-1664),
or Optional DC Adapter (273-1801)
Power Consumption .......................................................................................... 8 W
Battery Life (EIAJ Method)
CD-3620 ............................................................................................... 9 Hours
2
CD-3640 ...................................................................... 7.5 Hours with DAS off
Dimensions (HWD) ................................................................ 13/16 × 51/4 × 6 Inches
(30 × 134 × 153 mm)
Weight (without batteries)
CD-3620 ........................................................................................ 9 oz (255 g)
CD-3640 ..................................................................................... 9.1 oz (258 g)
Included Accessory ..................................................................................... Y-Cable
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
22
42-5073.fm Page 23 Thursday, August 12, 1999 11:08 AM
NOTES
23
42-5073.fm Page 24 Thursday, August 12, 1999 11:08 AM
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN-
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of in-
cidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
8A7
Printed in Thailand
|