Hard Disk Drive (HDD)
Installation Instructions
c53_105_hdd.jpg
for HDD Part Number 70043502
59387901
Installation
1. Turn off the printer (1).
2. Unplug the power cord (2).
3. Detach the interface cable from the
back of the printer (3).
C6100_1.jpg
3
4. Open the top cover.
C6100_2.jpg
5. Open the front cover.
C6100_3.jpg
4
6. Loosen the thumbscrew holding the
printer side cover in place.
C6100_4.jpg
5
7. Lift up on the ends. Remove the side
panel from the printer.
C6100_5.jpg
6
8. Locate the slot (1) on the control board
shield.
C6100_10.jpg
7
9. Remove the HDD from its shipping
package.
10.Insert the top of the HDD cage into the
slot on the control board shield.
C6100_11.jpg
8
11.Tighten the thumbscrews (1) to secure
the HDD.
C6100_12.jpg
12.Insert the HDD cable firmly into the
connector.
C6100_13.jpg
9
13.Replace the side panel on the printer.
Use the thumbscrew to secure the
panel.
C6100_4.jpg
14.Close the front cover.
C6100_15.jpg
10
15.Close the top cover.
C6100_16.jpg
16.Attach the interface cable.
17.Plug in the power cord.
18.Turn on the printer.
11
Verify the Installation
Print the MenuMap
Note: The MenuMap is a list of the current
menu settings.
Keypad.jpg
1. Press + one or more times until
INFORMATION MENU appears on the
display.
2. Press ENTER twice.
The MenuMap prints.
3. Look at the top of the printout.
“HDD: installed” should appear.
If it doesn’t (you see “HDD:
uninstalled”)
Repeat the “Installation” steps until it
does.
12
Change the Driver Setting
Windows®
Postscript Emulation Driver
1. Click Start → Settings → Printers
[Printers and Faxes for XP].
2. Right click the appropriate printer icon.
Click Properties.
Windows XP, 2000 and NT 4.0
a. Click the Device Settings tab.
b. Scroll down to Installable Options.
Click Hard Disk.
Windows Me and 98
a. Click the Device Options tab.
b. Scroll down to Installable Options.
Click Printer Hard Disk.
3. Select Installed
4. Click OK. Close the Printers (Printers
and Faxes) dialog box.
13
PCL Driver
1. Click Start → Settings → Printers
[Printers and Faxes for XP].
2. Right click the PCL printer icon. Click
Properties.
3. Click the Device Option tab.
4. Click Printer Hard Disk.
5. Click OK. Close the Printers (Printers
and Faxes) dialog box.
Macintosh®
Mac OS 9.1+
1. Activate Chooser from the Apple menu.
2. Select LaserWriter 8.
3. Click Printer → Setup.
4. Click Configure.
5. Select Hard Disk in the Change
drop-down menu.
6. Change the setting of the next
drop-down menu to Installed.
7. Click OK twice.
8. Close Chooser.
14
Mac OS X to X.1
No activation is required.
Mac OS X.2
1. Activate Print Center from Local Hard
Drive → Applications → Utilities →
Print Center.
2. Highlight the printer name. Select
from the menu Printers → Show Info.
3. Choose Installable Options from the
drop down menu.
4. Click the box next to Hard Disk to
enable the option.
5. Click Apply Changes. Exit to the
desktop.
Macintosh OS X.3+
1. Activate the Printer Setup Utility from
Local Hard
Drive → Applications → Utilities
→ Printer Setup Utility.
2. Highlight the printer name. Select
from the menu Printers → Show Info.
3. Choose Installable Options from the
drop down menu.
4. Click the box next to Hard Disk to
enable the option.
5. Click Apply Changes. Exit to the
desktop.
15
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Phone: (800) 654-3282
FAX: (856) 222-5320
59387901
|