NetComm Network Router 3G17WN User Manual

NetComm 3G18Wn/3G17Wn router and Blink 3G USB modem  
Blink 3G Internet Connection Setup Instructions:  
The following steps describe how to configure a NetComm 3G18Wn or 3G17Wn 3G router from  
factory default settings to Blink’s 3G Internet Service using a Blink 3G USB modem (Huawei E169).  
1. Connect your Blink 3G modem to the USB port on the NetComm 3G router.  
2. Using the supplied ethernet networking cable connect your computer to one of the LAN  
ports on the back of the NetComm 3G router.  
3. Power on the NetComm 3G router and allow a couple of minutes for the unit to start up.  
4. Using your web-browser (e.g Internet Explorer) open the address http://192.168.20.1.  
5. The following NetComm 3G18Wn/3G17Wn configuration page should be displayed.  
Page 1 of 3  
 
10. Under the ‘WWAN (3G)’ section the ‘Status’ should be reported as being ‘Up’. This is an  
indication that the NetComm 3G router is connected to the Internet.  
11. You should now be able to access the internet!  
If find that you are unable to browse the Internet at this point or would like to connect your  
computer wirelessly to the NetComm 3G router then please refer to the Quick Start Guide or User  
Guide (on supplied CD) for setup instructions.  
Page 3 of 3  
 

NEC Computer Monitor FE1250+ User Manual
NEC Telephone DSX 40 User Manual
NeumannBerlin Microphone EA 30B User Manual
Oceanic Scuba Diving Equipment 04106107 User Manual
Oki Printer 12i User Manual
Olympus Film Camera 101200 User Manual
Optimus Stereo Receiver STAV 3790 User Manual
Panasonic Telephone KX TC1105ALB User Manual
ParaBody Home Gym PBF506 User Manual
Partner Tech Lawn Mower P11597 User Manual