NEC Solutions (America), Inc.
Visual Systems Division
NP1000/2000 Installation Guide
Desktop and Ceiling Mount
v 1.1
Contents
Product Description, Lens Specs, Screen/Aspect Ratio
Notes and Formulas _________________________________
Pg 1
Pg 2
Pg 3
Pg 4
Pg 5
Pg 6
Pg 7
Pg 8
Pg 9
Diagrams & Distance Charts;
Lens Shift Adjustable Range
4:3
16:9___
_______ __
_______ __
Cabinet Dimensions_____________ ________
Lens Dimensions_______________
Ceiling Mount Dimensions________
Ceiling Mount Dimensions________
Input Panel and Control Codes
_______
_______
_______
______
Product Description
Type:
3 panel LCD projector,
0.8 p-Si TFT w/MLA
Dimensions: 15.7”(W) x 5.9”(H) x 14.1”(D)
Weight:
16.1 lbs
Resolution: 1024 x 768 (4:3) / 1024 x 576 (16:9)
Brightness: NP1000 – 3500 ANSI Lumens
NP2000 – 4000 ANSI Lumens
Manual: Lens Shift, Horizontal & Vertical /Zoom/ Focus
Network Ready, integrated wired/optional wireless
Lens Specifications
NP01FL: Throw Ratio: ~ 0.8:1
Focal Length: 13.2mm
F/#:2.3
NP03FL: Throw Ratio:~1.94 - 3.07:1
Focal Length:31.6 – 50.2mm
F/#:2.2 _____________
Focal Length:48.8 - 77.6mm
F/#:2.2____ _________
Screen Sizes: 40”-150”
Screen Sizes: 40” - 500”
NP02FL: Throw Ratio: ~1.18 - 1.54:1 Focal Length: 19.42 - 25.26mm NP04FL: Throw Ratio:2.98 -4.77:1
Screen Sizes: 30” - 500”
F/#:2.2
_________
Screen Sizes: 60” - 500”
NP05FL: Throw Ratio:4.62 - 7.02:1
Screen Sizes: 80” - 500”
_
Standard: Throw Ratio:~1.5 - 2.0:1
Focal Length:24.4 - 32.5mm
Focal Length:76.6 - 116.5mm
F/#:2.2
Screen Sizes: 30” – 500” F/#:1.7
Screen/Aspect Ratio
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.
Notes
ƒ
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
•
•
•
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3:
Projection Formulas:
Definitions:
NP01FL:
NP02ZL:
Standard:
NP03ZL:
NP04ZL:
NP05ZL:
C = 0.8325H – 1.33
W = Image Width
H = Image Height (size)
C = Throw distance
C(Wide) = 1.2220H – 1.798 --------- C(Tele) = 1.5894H – 1.795
C(Wide) = 1.5455H – 2.022 --------- C(Tele) = 2.0555H – 2.015
C(Wide) = 2.0069H – 2.830 --------- C(Tele) = 3.1710H – 2.840
C(Wide) = 3.0537H – 4.830 --------- C(Tele) = 4.8860H – 4.850
C(Wide) = 4.8275H – 7.625 --------- C(Tele) = 7.3379H – 7.645
4:3 Screen Formulas:
W = H x 4/3
H = W x 3/4
Diagonal = W x 5/4
16:9 Screen Formulas:
W = H x 16/9
Note: Tilting the front of the projector from level up or down by
H = W x 9/16
more than 45° could reduce lamp life up to 20%.
Screen Diagonal = W x 18.358/16
NP1000/2000
Page 1 of 9
NEC Solutions (America), Inc.
Visual Systems Division
NP1000/2000 Installation Guide
Desktop and Ceiling Mount
v 1.1
Projection Distance and Screen Size for Ceiling Mount
The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of
installation.
Distances are in inches. For millimeters multiply by 25.4.
Ceiling Mount Installation
C
X
Throw Distance
7.72"
Screen Top
Screen Ctr
Shift Range
Lens Offset From
Mount Pipe
X=Distance from lens to mount ctr
Standard: X=7.03"
NP01FL: X=8.03"
NP02FL: X=7.78"
NP03FL: X=7.83"
NP04FL: X=7.44"
NP05FL: X=7.41"
3.30"
Desktop Installation
Note: Lens shift feature is not available with NP10FL
(rear lens) NP10FL should be used only for
“zero degree” / “no-offset” applications.
C
Throw Distance
Screen Ctr
3.45"
Screen Bottom
Distance Chart for popular 16:9 screens
Zoom Lenses
Rear Lens
Screen Size (16:9)
Standard
NP02ZL
NP03ZL
NP04ZL
NP05ZL
NP01FL
1.5 - 2.0:1
inches
1.18 - 1.54:1
inches
1.94 - 3.07:1
inches
2.98 - 4.77:1
inches
4.62 - 7.02:1
inches
Diagonal Width(H) Height (V)
0.8:1
inches
65.24
inches inches
inches
45
92
80
87
121.6 - 162.4 96.0 - 125.4 157.7
250.8
239.5
260.8
276.1
288.3
386.0
420.2
444.7
464.2
366.4
399.5
423.1
442.0
579.4
630.8
667.4
696.8
100
106
110
119
123
133
135
159
161
229
275
367
459
49
52
71.1
75.2
78.5
85.2
87.7
95.1
96.8
NA
132.4 - 176.8 104.5 - 136.5 171.8 - 273.0
140.1 - 187.1 110.6 - 144.4 181.8 - 288.9
146.3 - 195.3 115.5 - 150.8 189.8 - 301.6
158.7 - 211.8 125.3 - 163.5 205.9 - 326.9
163.3 - 217.9 129.0 - 168.3 211.9 - 336.5
177.2 - 236.4 140.0 - 182.6 230.0 - 365.0
180.3 - 240.5 142.4 - 185.8 234.0 - 371.3
212.8 - 283.7 168.1 - 219.1 276.1 - 437.9
214.3 - 285.8 169.3 - 220.7 278.1 - 441.1
307.1 - 409.1 242.6 - 316.1 398.6 - 631.4
368.9 - 491.3 291.5 - 379.7 478.8 - 758.2
92
96
54
104
107
116
118
139
140
200
240
320
400
58.8
60
312.8 - 503.3
321.9 - 518.0
349.4 - 561.9
355.5 - 571.7
419.6 - 674.3
422.7 - 679.2
605.9 - 972.4
494.4 - 755.5
508.9 - 777.5
552.4 - 843.6
562.0 - 858.2
663.4 - 1012.3
668.2 - 1019.7
957.9 - 1459.9
65
66
78
79
NA
113
135
180
225
NA
NA
728.1 - 1167.8 1151.0 - 1753.5
NA
492.6 - 655.7 389.2 - 506.8 639.4 - 1011.9 972.4 - 1558.7 1537.2 - 2340.5
616.3 - 820.2 487.0 - 634.0 799.9 - 1265.6 1216.7 - 1949.6 1923.4 - 2927.5
NA
Note:
For screen sizes not indicated on the projection tables, use the formulas on page 1.
NP1000/2000
Page 3 of 9
NEC Solutions (America), Inc.
Visual Systems Division
NP1000/2000 Installation Guide
Desktop and Ceiling Mount
v 1.1
Lens Shift Adjustable Range
Desktop/Front
Vertical
Horizontal
0.10H
0.5V
Normal Position
Normal Position
0.10H
Ceiling/Front
Vertical
Lens Shift Range for Desktop and Ceiling Mount
Application
The diagram below shows the location of the image position
in the lens. The lens can be shifted within the shaded area as
shown using the normal projection position as a starting
point.
Normal Position
0.5V
Note: Lens shift feature is not available with NP10FL (rear
lens). NP10FL should be used only for “zero degree” / “no-
offset” applications.
Maximum Possible Range
for Standard Lens/NP02ZL/NP03ZL/NP04ZL/NP05ZL:
Up: 0.5V
Right: 0.10H
Left: 0.10H
0.10H
0.10H
(H: width of projected image, V: height of projected image)
0.50V
0.50V
Normal projection
position
NP1000/2000
Page 4 of 9
NEC Solutions (America), Inc.
Visual Systems Division
NP1000/2000 Installation Guide
Desktop and Ceiling Mount
v 1.1
Cabinet Dimensions
The following diagrams show the cabinet dimensions for the NP1000/2000.
Dimensions are in inches. For millimeters multiply by 25.4.
15.7
For Mount
M4*8 MAX
Lens Shift Control
2.20
10.925
.157
11.20
15.7
.157
(
)
4.59
Speakers
Lamp cover
Air Exhaust
Air Filters
NP1000/2000
Page 5 of 9
NEC Solutions (America), Inc.
Visual Systems Division
NP1000/2000 Installation Guide
Desktop and Ceiling Mount
v 1.1
Lens Dimensions
The following drawings show the added dimensions for the optional lenses
Dimensions are in inches. For millimeters multiply by 25.4.
NP01FL
NP w Standard Lens
3.385
NP02ZL
NP03ZL
3.385
3.81
NP05ZL
NP04ZL
3.25
3.25
NP1000/2000
Page 6 of 9
NEC Solutions (America), Inc.
Visual Systems Division
NP1000/2000 Installation Guide
Desktop and Ceiling Mount
v 1.1
Optional Ceiling Mount Dimensions (Model #: NP1000CM)
The following diagrams show ceiling mount dimensions for the NP1000/2000.
Dimensions are in inches. For millimeters multiply by 25.4.
10.41
15.19
5.02
10.17
12.11
4.95
9.99
5.88
Pole Ceiling Mount with Input Cover
NP1000/2000
Page 7 of 9
NEC Solutions (America), Inc.
Visual Systems Division
NP1000/2000 Installation Guide
Desktop and Ceiling Mount
v 1.1
Optional Ceiling Mount Dimensions (Model #: NP1000CM) (continued)
The following diagrams show ceiling mount dimensions for the NP1000/2000.
Dimensions are in inches. For millimeters multiply by 25.4.
10.75
12.11
5.02
5.73
4.95
POLE MOUNT W/O I/O COVER
NP1000/2000
Page 8 of 9
NEC Solutions (America), Inc.
Visual Systems Division
NP1000/2000 Installation Guide
Desktop and Ceiling Mount
v 1.1
PC Control Codes
Function
Code Data
POWER ON
02H
02H
02H
02H
02H
02H
02H
02H
00H
01H
03H
03H
03H
03H
03H
03H
03H
03H
10H
11H
12H
13H
14H
15H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
02H
02H
02H
02H
02H
02H
02H
02H
00H
00H
00H
00H
00H
00H
02H
03H
01H
01H
01H
01H
01H
01H
01H
01H
12H
13H
14H
15H
16H
17H
POWER OFF
INPUT SELECT RGB 1
INPUT SELECT RGB 2
INPUT SELECT RGB 3
INPUT SELECT COMPONENT
INPUT SELECT VIDEO
INPUT SELECT S-VIDEO
01H
02H
09H
0AH
1AH 22H
10H
06H
18H
0EH
0BH 13H
1FH 27H
INPUT SELECT PC CARD VIEWER 02H
INPUT SELECT LAN
PICTURE MUTE ON
02H
02H
02H
02H
02H
02H
02H
20H
28H
PICTURE MUTE OFF
SOUND MUTE ON
SOUND MUTE OFF
ON SCREEN MUTE ON
ON SCREEN MUTE OFF
Cable Connection
Communication Protocol:
Baud Rate:
Data Length:
Parity:
Stop Bit:
X on/off:
38400 bps (for cable lengths longer than 20’, it is recommended changing to 9600 bps in setup menu)
8 bits
To TxD of PC
To RxD of PC
To GND of PC
No Parity
One bit
None
Communications: Full duplex
1
2
3
4
5
9
6
7
8
PC Control Connector (D-Sub 9P)
To RTS of PC
To CTS of PC
NOTE:Pins 1, 4, 6, and 9 are used inside the projector.
Jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
NP1000/2000
Page 9 of 9
|