NEC Display Solutions of America, Inc.
X463UN Installation Guide
46” LCD Display
Rev 1.0
Contents
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front and all Sides
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 6
Bottom
Dimensions with Optional Peerless DS-VW765-LAND
Input Panel
Control Codes
Product Description
Type:
LCD Display
1920 x 1080
1920 x 1080
16:9
Class B
140W (max)
560W (max)
Screen Surface:
Anti-Reflective
Resolution:
Dimensions:
Quad Dimensions:
Weight:
Quad Weight:
BTU’s:
40.3”(W) x 22.8”(H) x 4.6”(D)
80.6”(W) x 45.6”(H) x 4.6”(D)
53.6 lbs
214.4 lbs
477 BTU/hour
Quad Resolution:
Aspect Ratio:
FCC:
Power Consumption:
Quad Power Consumption:
Quad BTU’s:
1911 BTU/hour
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
X463UN
Page 1 of 6
NEC Display Solutions of America, Inc.
X463UN Installation Guide
46” LCD Display
Rev 1.0
Display dimensions
Note: This product is not symmetrical.
X463UN
Page 3 of 6
NEC Display Solutions of America, Inc.
X463UN Installation Guide
46” LCD Display
Rev 1.0
Display dimensions (cont.)
RATING
LABEL
X463UN
Page 4 of 6
NEC Display Solutions of America, Inc.
X463UN Installation Guide
46” LCD Display
Rev 1.0
Quad Dimensions with Peerless DS-VW765-LAND
RATING
LABEL
RATING
LABEL
RATING
LABEL
RATING
LABEL
X463UN
Page 5 of 6
NEC Display Solutions of America, Inc.
X463UN Installation Guide
46” LCD Display
Rev 1.0
Input Panels:
Bottom:
Control Codes:
Function
Code Data
POWER
ON
OFF
VGA (15pin HD)
RGBHV
DVI
HDMI__________
VIDEO (Composite)
DVD/HD
S-Video
DisplayPort
ON
01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0D
01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 31 03 73 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 32 03 70 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 33 03 71 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 34 03 76 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 35 03 77 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 43 03 01 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 37 03 75 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 46 03 04 0D
01 30 41 30 45 30 41 02 30 30 38 44 30 30 30 31 03 09 0D
01 30 41 30 45 30 41 02 30 30 38 44 30 30 30 32 03 0A 0D
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 31 03 07 0D
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 33 03 05 0D
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 34 03 02 0D
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 35 03 03 0D
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 31 03 70 0D
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 32 03 73 0D
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 33 03 72 0D
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 34 03 75 0D
01 30 41 30 45 30 41 02 30 30 31 45 30 30 30 31 03 01 0D
INPUT SWITCH
AUDIO MUTE
OFF
PICTURE MODE sRGB
HIBRIGHT
STANDARD
CINEMA
SCREEN MODE: NORMAL
FULL
WIDE
ZOOM
AUTO SETUP
EXECUTE
NOTE: Contact your NEC rep for codes not listed.
NOTE: Use a cross/reverse/null modem cable.
Cable Connection:
Communication Protocol:
PC Control Connector (D-Sub 9-Pin)
Interface:
Communication:
Baud Rate:
Data Length:
Parity:
RS-232C
Asynchronous
9600 bps
8 bits
None
Stop Bit:
1 bit
Communication Code:
Hex
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
These connections are not required. The only connections required are pins 2 (TxD), 3 (RxD) and 5 (GND).
X463UN
Page 6 of 6
|