NEC Flat Panel Television P42XP10 BK User Manual

NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Contents:  
Product Description and Notes  
Tilt Angle and Rotation  
Ventilation Requirements  
Display Dimensions  
Page 1  
Page 1  
Page 2  
Front, Top, Bottom & Right Side  
Rear  
Cosmetic Colors  
Display Dimensions w/Optional Speakers and Stand  
Optional Stand Dimensions  
Optional Speaker Dimensions  
Dimensions w/Optional Wall Mount  
Connections  
Page 3  
Page 4  
Page 4  
Page 5  
Page 6  
Page 7  
Page 8  
Page 9  
Page 10  
Control Codes  
Product Description  
Type:  
Plasma Monitor  
1024x768  
16:9  
Screen Surface: Anti-Reflective  
Resolution:  
Aspect Ratio:  
Dimensions:  
Weight:  
40.79”(W) x 25.36”(H) x 5.00”(D)  
81.6 lbs  
Class B  
FCC:  
Notes  
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to  
be a step-by step procedure for installation.  
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local  
building codes. All mounts should make secure contact to wood studs.  
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to  
fill the screen using the menus (see “Aspect Modes” in menus and user manual).  
Distances are in inches, for millimeters multiply by 25.4.  
Distances may vary ±5%.  
Tilt Angle and Rotation  
Below are the maximum angles that the monitor can be tilted in the landscape position only.  
Do not install in the portrait position.  
Landscape 20deg  
Max. 20 deg  
P42XP10-BK  
Page 1 of 10  
 
NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Display dimensions  
38.27  
36.69  
34.33  
30.31  
0.87  
TOP VIEW  
FILTER PANEL SURFACE  
1.62  
37.54  
1.62  
36.28 (PANEL DISPLAY AREA)  
LED  
IR  
0.51  
19.70  
40.79  
RIGHT SIDE VIEW  
2.36  
14.80  
3.23  
0.33  
0.40  
POWER SWITCH  
AC IN  
18.50 (TERMINAL PANEL)  
16.51  
BOTTOM VIEW  
P42XP10-BK  
Page 3 of 10  
 
NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Display dimensions (cont.)  
for PC  
4-M4 Depth 10  
700  
445  
for MOUNT UNIT  
4-M8 Depth 16  
for SPEAKER  
8-M4  
Label  
0.63  
23.78 (STAND)  
REAR VIEW  
P42XP10-BK  
Page 4 of 10  
 
NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Dimensions with optional speakers and stand  
23.78  
0.04 3.15  
3.15 0.04  
6.80  
2.80  
16.40  
26.50  
47.17  
P42XP10-BK  
Page 5 of 10  
 
NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Optional Stand Dimensions (ST-P42P1)  
Table Top Stand  
ST-P42P1  
Ø 0.39  
0.79  
9.66  
13.60  
16.4  
0.79  
1.77  
P42XP10-BK  
Page 6 of 10  
 
NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Optional Speaker Dimensions (SP-P42P1)  
Optional Speakers  
SP-P42P1  
0.79  
3.15  
1.54  
4-M4  
0.79  
INPUT TERMINAL  
P42XP10-BK  
Page 7 of 10  
 
NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Dimensions with optional Wall Mount Kit (WMK3260-L)  
Label  
P42XP10-BK  
Page 8 of 10  
 
NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Connections  
Speaker Terminal Connections  
Located at bottom of display  
Control Panel  
Power Switch  
P42XP10-BK  
Page 9 of 10  
 
NEC Display Solutions of America, Inc.  
P42XP10-BK Installation Guide  
42” Plasma Monitor  
Rev 1.2  
Control Codes  
Function  
Code Data  
POWER  
ON  
OFF  
01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 18 0D  
01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 1D 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 31 03 18 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 32 03 1B 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 33 03 1A 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 34 03 1D 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 35 03 1C 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 36 03 1F 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 37 03 1E 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 43 03 6A 0D  
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 44 03 6D 0D  
01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 31 03 62 0D  
01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 30 03 63 0D  
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 33 03 6E 0D  
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 34 03 69 0D  
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 35 03 68 0D  
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 42 03 1F 0D  
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 43 03 1E 0D  
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 31 03 1B 0D  
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 32 03 18 0D  
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 33 03 19 0D  
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 34 03 1E 0D  
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 42 03 68 0D  
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 43 03 69 0D  
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 44 03 6E 0D  
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 45 03 6F 0D  
01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 31 03 6A 0D  
01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 30 03 6B 0D  
01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 32 03 1E 0D  
01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 31 03 1D 0D  
INPUT SWITCH  
RGB1 (15pin HD)  
RGBHV  
DVI  
DVD3/HD3 (HDMI)  
VIDEO1  
VIDEO2  
S-Video  
DVD1/HD1  
DVD2/HD2  
ON  
AUDIO MUTE  
OFF  
PICTURE MODE BRIGHT  
STANDARD  
CINEMA1  
CINEMA2  
DEFAULT  
SCREEN MODE: NORMAL  
FULL  
ZOOM  
DYNAMIC  
2.35:1  
14:9  
UNDERSCAN  
TRUE  
ON  
OFF  
ON  
OFF  
AUTO PICTURE  
FILM MODE  
NOTE: Contact your NEC rep for codes not listed.  
NOTE: Use a cross/reverse/null modem cable.  
Cable Connection  
Communication Protocol:  
Interface:  
RS-232C  
Parity:  
None  
Communication: Asynchronous  
Stop Bit: 1 bit  
Baud Rate:  
Data Length:  
9600 bps  
8 bits  
Communication Code: ASCII  
PC Control Connector (D-Sub 9P)  
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.  
These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).  
P42XP10-BK  
Page 10 of 10  
 

MTD Log Splitter 245 632 000 User Manual
Murray Lawn Mower 20 inch User Manual
NEC Frozen Dessert Maker NP01SW User Manual
Omega Vehicle Security Automobile Accessories AS9256 User Manual
Onkyo DVD Player CP701 User Manual
Outback Power Systems Welding System GS8048 User Manual
Panasonic All in One Printer DP 2330 User Manual
Panasonic Car Stereo System CQ 5335U User Manual
Panasonic Computer Drive CF VFS371 User Manual
Panasonic Musical Instrument AG MX70P User Manual