Milton Bradley Board Games 941 A User Manual

(Troubleshooting Continued)

Troubleshooting Cherry Tree Controller:

Hi Ho Cherry O

Problem: The Cherry Tree Controller does not activate by pressing on the

plates or your switch

Action #1: Make sure that the connection between the controller and your

switches (if applicable) are tight. There should be no gaps. This is a common

error and an easy fix.

Action # 2 Make sure the batteries are in the battery compartment properly, and

making good contact. Replace if weak or dead.

Catalog # 941

Action 3: Try a different switch with the controller (if applicable) to rule out

this as the source of the problem.

Action #4: Check that no debris or small objects are blocking or obstruction

either of the two switch plates.

Additional Board for Hi Ho Cherry O

Care of Unit:

The Spinner and Cherry Tree Controller can be wiped clean with any

household multi-purpose cleaner and disinfectant.

Do not submerge the unit, as it will damage the contents and the electrical

components.

# 941-A

Do not use abrasive cleaners, as they will scratch the surface of the unit

For Technical Support:

Call our Technical Service Department

Monday through Friday, 9 a.m. to 5 p.m. (EST)

1-800-TEC-TOYS or 1-800-832-8697

User’s Guide

Enabling Devices & Toys for Special Children

385 Warburton Avenue

Hastings-on-Hudson, NY 10706

Enabling Devices & Toys for Special Children

Telephone 914-478-0960 - Fax 914-478-7030

Hastings-on-Hudson, NY 10706