H 6100 BM
H 6200 BM
–
Do not dispose of this appliance with
your household waste.
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Before discarding an old appliance
ensure that it presents no danger to
children while being stored for disposal.
Unplug it from the outlet, cut off its
power cord and remove any doors to
prevent hazards.
93
The voltage can be adjusted (see
"Settings - ").
CAUTION:
Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually "tripping" the circuit
breaker.
'
NEMA 14-30P, L1, L2, N, G, 20 amp
208/240VAC
Installation, repair and maintenance
work must be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into cabinetry.
The plug must be plugged into an
appropriate outlet that is installed
and grounded in accordance with all
local codes and ordinances.
94
Miele ovens can be installed flush or proud. Discuss your installation
requirements with your architect, designer and installer.
21 5/8"
( 550 mm)
17 3/4" - 17 13/16"
(450-452 mm)
4"
(100 mm)
22 1/16"
7/8" (22*/23** mm)
22 1/16"
(560 mm)
(560 mm)
17 1/2" (445 mm)
17 15/16"
(455 mm)
21 9/16" (549 mm)
23 7/16"
(595 mm)
Cut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power
cord and ventilation
Power cord with plug
*
Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.
95
If installed underneath a cooktop, the installation instructions for the cooktop
must also be taken into account.
21 5/8"
( 550 mm)
18 1/8" - 18 5/16"
(460-465 mm)
4"
(100 mm)
22 1/16"
(560 mm)
7/8" (22*/23** mm)
22 1/16"
(560 mm)
17 1/2" (445 mm)
17 15/16"
(455 mm)
21 9/16" (549 mm)
23 7/16"
(595 mm)
Cut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power
cord and ventilation
Power cord with plug
*
Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.
96
7/8"
(22*/23** mm)
22 1/16"
(560 mm)
17 1/2"
(445 mm)
17 15/16"
(455 mm)
17 3/4"-17 13/16"
(450-452 mm)
20 7/8"
( 530 mm)
4"
(100 mm)
21 9/16"
(549 mm)
23 7/16"
(595 mm)
22 1/16"
(560 mm)
23 1/4"-23 7/16"
(590-595 mm)
16" (407 mm)
7/8"
(22*/23** mm)
4"
(100 mm)
21 11/16"
(551 mm)
22 11/16"
(577 mm)
20 1/16"
(510 mm)
23 7/16"
(596 mm)
21 1/2" (546 mm)
23 7/16"
(595 mm)
Cut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power
cord and ventilation
*
Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.
97
4 3/8"
(111 mm)
B
17 15/16"
(455 mm)
A
17 3/4"
(451 mm)
17 1/2"
(445 mm)
13 1/8"
(333 mm)
3/16"
(4 mm)
- 1/16"
(-2 mm)
H61xx: 2 5/16" (59 mm)
H62xx: 1 5/8" (42 mm)
Speed Oven with glass front: 1/16" (2.2 mm)
Speed Oven with metal front: 1/16 (1.2 mm)
98
The oven must not be operated
until it has been properly installed
within cabinetry.
If there are side handles, please
remove them.
Connect the power cord to the
electrical supply.
Push the oven into the cabinetry up
to the oven trim and align it.
Open the door and use the screws
supplied to secure the oven to the
side walls of the cabinetry through
the holes in the oven trim.
99
Please have the model and serial number
of your appliance available before
contacting Technical Service.
U.S.A.
Canada
Miele, Inc.
Importer
Miele Limited
National Headquarters
9 Independence Way
Princeton, NJ 08540
Headquarters and Miele Centre
161 Four Valley Drive
Vaughan, ON L4K 4V8
800-843-7231
609-419-9898
609-419-4298
Phone:
Fax:
Customer Care Centre
Phone:
800-565-6435
905-532-2272
Technical Service & Support
Nationwide
800-999-1360
888-586-8056
Phone:
Fax:
Germany
Manufacturer
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
100
H6100BM; H6200BM
–
|