HARDWARE GUIDE
MACIN TO SH & W IN DO W S
WARN IN G - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIO N - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
®
GEN ESIS
Macintosh
TIBLE!
RAID SYSTEMS
OS-X 10.2 Jaguar
A
Windows XP
•
COMP
®
SAN CUBE FIREW IRE
STO RAGE AREA
N ETW O RK
•
®
RAIDBAN K
RAID TO W ERS
•
FIBREFLEXTM
W O RKGRO UP
SO LUTIO N S
•
MicroNet
19260 Van Ness Avenue
Torrance, CA 90501
IN STALLIN G YO UR MICRO N ET
®
DATADO CK
TRAN SPO RTABLE
STO RAGE SYSTEMS
Sales: 310-320-7272
Support: 310-320-0772
FIREW IRE/ USB2 CO MBO
•
HARD DISK DRIVE
MICRO N ET
ADVAN TAGE
SERIES
FCC Compliance Statements
Thank you for choosing MicroNet! Your MicroNet data storage prod-
uct has been built to the highest standard of quality and workmanship
and, when used according to the instructions in this guide, will provide
years of trouble-free operation. We at MicroNet take great pride in
bringing personal satisfaction to each of our customers. If you have any
questions about your new FireWire Disk Drive, or about any other
MicroNet products, please feel free to contact us!
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate fre-
quency energy and, if not installed and used in accordance with the instructions, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to equipment off and on, the user is encouraged to correct the interference by one or more
of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the distance between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
11-04-2002
MNFWUSB71702 RevE
The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation
of this document to assure its accuracy, MicronetDrives assumes no liability resulting from errors or omissions in this document, or from the use of the infor-
mation contained herein.
MicroNet reserves the right to make changes in the product design without reservation and without notification to its users.
MicroNet and the MicroNet logo are registered trademarks of MicroNet. FireWire, the FireWire logo, Macintosh, and the MacOS Logo are trademarks of
Apple Computer Inc. Microsoft Windows and the Windows Logo are registered trademarks of Microsoft Corporation. Toast is a registered Trademark of
Roxio, Inc.
Your drive is compatible with all FireWire or USB-capable Apple
Macintosh computers running MacOS 8.6 (or greater), Mac OS 10.1 (or
greater) and PC-Compatible computers running Windows 98-Second
Edition, Millenium Edition, Windows 2000, or Windows XP.
Copyright © 1999, 2002 MicroNet. All rights reserved. This publication may not be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, in whole or in part, without the prior written consent of MicroNet, 19260 Van Ness Ave., Torrance CA 90501.
w w w .Micro N e t.co m
Revised 11-2002
SOFTWARE INSTALLATION- Firewire
SOFTWARE INSTALLATION- USB
Windows Systems
Windows Systems
TM
TM
Installation on a Windows system requires either Windows 98-Second Edition, Windows
Millenium, Windows 2000, or Windows XP. FireWire is not supported on Windows 95, earlier
versions of Windows 98, or Windows NT 4.0 and earlier.
Installation on a Windows system requires Windows 98 or greater. The USB
drivers for your product do not support Windows 98/Windows NT4 or eariler.
No Additional software is necessary for installation under Windows ME,
Windows 2000, or Windows XP.
Windows 98/ME
Windows 98
(for Windows ME installation, please skip to step 4)
Please be sure to have your Windows 98/ME installation CD available as it may be
required during installation.
Please be sure to have your Windows 98SE installation CD available as it may be
required during installation.
1. Before connecting your MicroNet USB Storage Device,
please insert the included driver CDRom and run
1. Before connecting your MicroNet Firewire Storage Device,
please install the Microsoft 1394 (Microsoft Support
Document Q242975). This update can be downloaded from
Microsoft or from the MicroNet Support web page.
2. Connect and power on your MicroNet Firewire Storage Device,
and reboot your computer.
3. Plug and Play will detect your MicroNet Firewire Storage
Device and will automatically install the necessary software.
Should any Version Conflict dialog boxes pop up, click YES
to keep the existing files. Do not click on the cancel button, as
this will prohibit the drivers from loading properly. These dia-
log boxes will only display the first time you install your
external storage.
4. Right click on “My Computer” on your desktop, and select
Properties. Click on the Device Manager tab (see top illustra-
tion,) locate the new device, and click the “Properties” button
5. Under the “Settings” Tab, check the “removable” checkbox
(See bottom illustration)
6. Press the “OK” button and reboot. Your MicroNet Firewire
Storage Device is ready to use!
“TPPINST.EXE”. Select Complete Install, and reboot the
computer when prompted. This is only required the first time
you install a MicroNet USB Storage Device.
2. Connect and power on your MicroNet USB Storage Device
3. Plug and Play will detect your MicroNet USB Storage Device
and will automatically install the necessary software.
4. Right click on “My Computer” on your desktop, and select
Properties. Click on the Device Manager tab (see top illustra-
tion,) locate the new device, and click the “Properties” button
5. Under the “Settings” Tab, check the “removable” checkbox
(See bottom illustration)
6. Press the “OK” button and reboot. Your MicroNet USB
Storage Device is ready to use!
Windows ME/2000/XP
Windows ME, 2000, and Windows XP will autodetect your MicroNet
Storage Devices and mount them automatically!
Note: in order to reach USB 2.0 speeds, you must have a com-
puter or host adapter that has USB 2.0 support. Your MicroNet
storage device will autosense the highest available connection
speed.
Windows 2000/XP
Windows ME, 2000, and Windows XP will autodetect your MicroNet
Storage Devices and mount them automatically!
Should you experience any trouble installing your drive,
please do not hesitate to contact us. Our support staff is
always ready to assist you!
Page 4
Page 5
INSTALLATION - Hardware
SOFTWARE INSTALLATION- USB
MacOS Systems
Fire w ire
Note for OS8-9 users: Please install Hard Disk
Speedtools prior to connecting your MicroNet
Disk Drive.
Installation on a MacOS system requires MacOS 8.6 or greater. The USB drivers for
your product do not support operating systems earlier than MacOS 8.6. No Additional
software is necessary for installation under OS-X.
Power Switch
• Plug the included power cable into the power
connector on your drive and plug the other
end into a grounded electrical outlet.
FireWire™ Ports
Power Connector
Please note that MicroNet Hard Disks are preformatted as Microsoft FAT volumes
from the factory in order to provide Mac and PC compatibility.
OS8.6-9.x
• Press the power switch on the drive to turn on your MicroNet storage device, then
power-on your computer.
1. Insert the included Hard Disk Speedtools Installation CD into your
computer’s CD-ROM drive.
• Connect one end of the included 6-pin IEEE-1394 peripheral cable to one of the
FireWire ports on the rear of your drive.
2. Double click the Hard Disk Speedtools installer Icon.
3. Check the Hard Disk Speedtools and the HDST USB sup-
port extensions in the installer as illustrated, and press the
install button.
• Connect the other end to one of your computer’s FireWire ports, or to the
FireWire port on a device already connected to your computer.
IMPORTANT: Be sure to turn ON your FireWire drive BEFORE
connecting it to your computer.
4. Follow the on-screen instructions to finalize the installa-
tion. Please make sure that you have
no other Firewire disk extensions
enabled besides Apple’s Firewire
Enabler and Firewire Support.
5. If you intend to use your Disk Drive
under MacOS exclusively, run Hard
Disk Speedtools, select your drive
and press the “setup” button.
6. Your MicroNet Firewire storage
device is ready to use!
Ab o u t Fire W ire (IEEE-1 3 9 4 )
FireWire was invented by Apple Computer in the early 1990s and was adopted by the
IEEE as a standard (IEEE 1394) in 1995 as a cross-platform high-speed serial technology
that can move large amounts of data between computers and peripheral devices. It fea-
tures simplified cabling, hot swapping, and transfer speeds of up to 400 megabits per
second. FireWire is one of the fastest peripheral standards ever developed, which
makes it great for use with multimedia peripherals such as video cam-
corders and other high-speed devices like the latest hard disk drives, cd-
recorders, scanners, and printers.
More information, along with the latest MacOS drivers for FireWire can always be found at:
USB
OS-X 10.1 and Jaguar
• Connect the square end of the included peripheral cable to the USB port on the
rear of your MicroNet USB Storage Device.
If you intend to use your Disk Drive under MacOS exclusive-
ly, please launch the “Disk Utility” application located under
Applications/Utilities folder. highlight your new drive and
select the “Erase” tab. Select the desired filesystem format and
click the “Erase” button. Your MicroNet FireWire Disk Drive
is ready to use!
• Connect the rectangular end of the cable to a free USB
port on your computer or USB hub.
• Connect the power cable to your USB Hard Disk Drive
and plug it into a grounded outlet.
USB Port
• Press the power switch on the front of the drive to turn on your
Power Connector
MicroNet USB Storage Device.
Power Switch
Should you experience any trouble installing your drive,
please do not hesitate to contact us. Our support staff is
always ready to assist you!
Note: in order to reach USB 2.0 speeds, you must have a computer or host
adapter that has USB 2.0 support. Your MicroNet storage device will
autosense the highest available connection speed.
Page 3
Page 6
|