INSTALLATION INSTRUCTIONS FOR PART 95-7318
APPLICATIONS
2005-2006 Kia Spectra 5
95-7318
KIT FEATURES
• DDIN Head Unit Provision
• ISO Stacked Head Unit Provision
KIT COMPONENTS
A) DDIN Brackets B) DDIN Trim Plate
A
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
•
70-7301 - 1999-up Kia / Hyundai harness
TOOLS REQUIRED:
Phillips Screwdriver • Small Flat Blade Screwdriver • Panel Removal Tool
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2004-09 METRA ELECTRONICS CORPORATION
DASH DISASSEMBLY
95-7318
2005-2006 KIA SPECTRA 5
A
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
2
Unclip and remove entire panel sur-
rounding radio and including A/C
controls. (Figure A)
Remove (4) Phillips screws to extract
3
radio from dash. (Figure B)
B
1
KIT ASSEMBLY
95-7318
2005-2006 KIA SPECTRA 5
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISION
A
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
1
Attach the Double DIN brackets to
the inside edge of the Double DIN
trim plate. (Figure A)
2
3
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
B
assembly using the screws supplied
with the radio. (Figure B)
Reassemble dash in reverse order of
disassembly.
4
2
95-7318
NOTES
95-7318
NOTES
95-7318
NOTES
95-7318 INSTRUCTIONS
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
REV. 11/17/09
© COPYRIGHT 2004-07 METRA ELECTRONICS CORPORATION
INST95-7318
|