Stainless steel double
spiral elements
Thermostat control for
each hotplate
On/Off lights for each
hotplate
y
27200BK_IM.indd
1
2012/09/11 02:24:28 PM
Tips about the electrical cord
•
•
•
A short power-supply cord is provided to
reduce the risk of becoming entangled in
or tripping over a longer cord.
Longer detachable power-supply cords or
extension cords are available and may be
used if care is taken.
If a long detachable power-supply cord or
extension cord is used:
• The marked electrical rating of the cord
set or extension cord should be at least
as great as the electrical rating of the ap-
pliance,
• The longer cord should be arranged so
that it will not drop over the counter top
or table top where it can be pulled on by
chidren or tripped over unintentionally.
Operating Instructions
1. Place your stove on a solid, safe surface.
Do not place it on a glass surface or a fine-
ly finished wood surface.
2. Place a heat resistant pad or mat under the
unit before using it to prevent possible heat
damage to counter or table top.
3. Plug the cord into the electrical wall outlet
and turn the thermostat to the desired heat
setting (heat selection from 1 to 6).
4. Turn the thermostat to lowest setting (0 po-
sition) when finished. Then unplug the cord
from the electrical outlet.
Cleaning Instructions
1. Unplug the cord.
2. Wipe the surface with a damp cloth or
sponge. Do not use steel wool or abra-
sives.
3. No maintenance other than cleaning is
required on this appliance.
NOTE!
IF THE SUPPLY CORD IS DAMAGED IT
MUST BE REPLACED BY THE MANUFAC-
TURER OR IT ‘S SERVICE AGENT TO AVOID
A HAZARD.
27200BK_IM.indd
3
2012/09/11 02:24:28 PM
27200BK_IM.indd
4
2012/09/11 02:24:28 PM
|