Mellerware Fan 35920A User Manual

E X E C U T I V E  
ELEGANT BREEZE 40CM PEDESTAL FAN  
complies with  
INTERNATIONAL  
Model:  
35920A  
IEC60355  
5
0
W
SAFETY SPECIFICATIONS  
PLEASE READ ALL INSTRUCTIONS BEFORE USE  
2 y e a r g u a r a n t e e  
35920A_IM.indd  
1
2012/06/18 09:56:06 AM  
 
Safety advice and cautions:  
Do not switch the appliance on if it has tipped  
Read these instructions carefully before switching  
over.  
on the appliance and keep them for future refer- Disconnect the appliance from the mains when  
ence. Failure to follow and observe these instruc-  
tions could lead to an accident.  
not in use and before undertaking any cleaning  
task.  
This appliance is for household use only, not  
professional or industrial use.  
Use or working environment:  
Place the appliance on a horizontal, flat, and stable  
surface.  
Switch off the appliance and disconnect from  
electrical supply before changing accessories or  
handling parts that move in use. This appliance  
should be stored out of reach of children and/or  
disabled persons.  
CAUTION: To prevent overheating do not cover  
the appliance.  
Electrical safety:  
This appliance is not intended for use by per-  
sons (including children) with reduced physical,  
sensory or mental capabilities, or lack of expe-  
rience and knowledge, unless they have been  
given supervision or instruction concerning use  
of the appliance by a person responsible for their  
safety.  
Do not use the appliance if the cable or plug is  
damaged.  
Ensure that the voltage indicated on the rating  
label matches the mains voltage before plugging  
the appliance in.  
Connect the appliance to a mains socket with an  
earth provision.  
Children should be supervised to ensure that  
they do not play with the appliance.  
The appliance’s plug must fit into the mains  
socket properly. Do not alter the plug. Do not  
use plug adaptors.  
Do not expose the appliance to extreme tem-  
peratures.  
Do not use or store the appliance outdoors.  
If any of the appliance’s casings break, immedi-  
ately disconnect the appliance from the mains to  
prevent the likelihood of an electric shock.  
Do not use the appliance if it has fallen on the  
floor or if there are visible signs of damage.  
Any misuse or failure to follow the instructions  
for use renders the guarantee and the manufac-  
turer’s liability null and void.  
Installation:  
Assembly:  
Do not force the electrical connection wire. Nev- Fit the adjustable column (S) into the hole in the  
er use the electric wire to lift up, carry or unplug  
the appliance.  
base support (B), place the counterweight base  
(G) underneath the support base (B) and secure  
with the “Lshaped screw (I) inserting the washer  
(H) between the base and “Lshaped screw (I)  
(Fig.1)  
Do not wrap the power cord around the appli-  
ance.  
Do not touch the plug with wet hands.  
Personal safety:  
Fix the motor (A) to the adjustable column (S)  
through the support motor (F) and fix in place  
with the motor body screw fastening (K) and the  
motor body fastening lever (L) making it coincide  
with the appropriate holes. Next introduce the  
incline adjustment screw (M) into the appropri-  
ate hole and tighten it with the inline adjustment  
lever (N).  
Do not touch any of the appliance’s moving parts  
while it is operating.  
Use and care:  
Fully unroll the appliance’s power cable before  
use.  
Do not use the appliance if the on/off switch  
does not work.  
Do not move the appliance while in use.  
Unscrew the 4 screws and remove the washers  
35920A_IM.indd  
3
2012/06/18 09:56:07 AM  
 
situated further back from the front part of the Carry handle:  
motor body (A). Using these 4 screws, attach the This appliance has a handle on the back to make it  
rear grille (Q), ensuring that the carrying handle  
(E) is on the upper part of the appliance.  
easy and convenient to transport.  
Safety trip switch:  
Insert the fan propeller (D) onto the motor shaft  
(R) until the hole in the fan propeller coincides  
with motor shaft groove. Next use the fan propel-  
ler tightening screw to tighten it completely.  
The appliance has a safety trip switch that protects  
the appliance from overheating.  
Cleaning:  
Disconnect the appliance from the mains and al-  
low it to cool before undertaking any cleaning  
task.  
Position the front grille (P) on to the back grille  
(Q), press them together ensuring that the clips  
are in alignment. Make sure that the hole in the Clean the equipment with a damp cloth with a  
front grille coincides with the security screw (O).  
few drops of washing-up liquid and then dry.  
Do not use solvents, or products with an acid or  
base pH such as bleach, or abrasive products,  
for cleaning the appliance.  
To ensure that the front and rear grilles are se-  
curely fitted together secure each one with the  
security screw (O). This should be introduced Do not let water or any other liquid get into the  
through the hole so that the grille’s cannot be  
separated without the use of a tool.  
air vents to avoid damage to the inner parts of  
the appliance.  
Do not submerge the appliance in water or any  
other liquid.  
Instructions for use:  
Unroll the cable completely before plugging it in.  
Connect the appliance to the mains electrical  
supply.  
Anomalies and repair:  
Take the appliance to an authorised technical  
support centre if problems arise. Do not try to  
dismantle or repair without assistance, as this  
may be dangerous.  
Guide the appliance to direct the flow of air in the  
desired direction.  
Select the desired speed.  
If the connection to the mains has been dam-  
aged, it must be replaced and you should pro-  
ceed as you would in the case of damage.  
Height Adjustment:  
The height of the appliance can be adjusted by  
loosening the control, setting the appliance to the  
desired height and tightening the control again.  
Oscillating function:  
The oscillating function makes it possible to di-  
rect the flow from the apparatus so that it auto-  
matically alternates over a range of 75º.  
To activate this function press the oscillating  
function control (T).  
Once you have finished using the appliance:  
Stop the appliance, selecting position 0 on the  
selector control.  
Unplug the appliance from the mains power sup-  
ply.  
35920A_IM.indd  
4
2012/06/18 09:56:07 AM  
 
35920A_IM.indd  
5
2012/06/18 09:56:07 AM  
 
35920A_IM.indd  
6
2012/06/18 09:56:07 AM  
 

Kuppersbusch USA Cooktop 6042 User Manual
Leica Laser Level E7500i User Manual
Lenovo Server RD430 User Manual
LG Electronics Air Conditioner 6710 YS User Manual
LG Electronics Oven LMB0960 User Manual
Life Fitness Treadmill T35 User Manual
Lightolier Landscape Lighting TE Series User Manual
Lowrance electronic GPS Receiver iFINDER M M User Manual
Mattel Handheld Game System 5152 0920 User Manual
Mazda Automobile 2001 Millenia User Manual