DCN-NG Pluggable Microphone
The DCN-MICS and DCN-MICL are unidirectional microphones
with an adjustable stem for use with DCN-IDESK-L Interpreter
desk, Concentus and flush mount units.
Specify Part
Number
DCN-MICS
DCN-MICL
shown installed
in DCN-IDESK-D
Features
•
•
•
•
•
•
•
•
Unidirectional microphone
Adjustable stem
Combines high acoustic quality and good sensitivity with low sensitivity
Built-in plop and windshield
Slim and attractive design
Fast and reliable connection is assured via the 6-pole connector
Low susceptibility to cell phones
2 color mic ring indicator, red (mic on), green (request to speak)
Specifications
Using a clamp on floor or table stand. Red light emitting light ring around
the microphone head
Controls and Indicators
Interconnection
Performance
6-pole connector
Sensitivity
Nominal level at 85 dB SPL, max level 110 db SPL at < 3% THD
Frequency response
Transducer type
Directional pattern
Equivalent noise level
SNR
100 Hz – 16 kHz
electret
cardiod
24 dB (A)
60 dB
Physical characteristics
Stem length
DCN-MICS 12.2 in. (310 mm), DCN-MICL 18.9 in. (480 mm)
DCN-MICS 0.24 lbs. (110 g), DCN-MICL 0.28 lbs. (125 g)
Weight
Mounting
Color
6-pole mini XLR connector
Silver
Listen Technologies Corporation
8535 South 700 West, Suite A
Sandy, UT 84070-2515 U.S.A.
Phone: 1.801.233.8992 or 1.800.330.0891
Fax: 1.801.233.8995
Don't miss a single sound.
Email: [email protected]
updated 06.24.05
Listen® and the Listen logo are registered trademarks of Listen Technologies Corporation
|