Lightolier Work Light C7E17FL PL User Manual

Calculite® HID Lensed Downlight C7E17FL-PL  
Prismatic Lens  
Fresnel Lens  
Page 1 of 2  
7" Aperture, ED17 (Enclosed), Ceramic Metal Halide, Fresnel or Prismatic Lens  
11  
9
2
5
3
1
4
7
8
6
11  
12  
10  
20" (508 mm) to 30" (762 mm)  
8-1/4"  
(210 mm)  
9-3/4"  
(248 mm)  
8-3/4"  
(222 mm)  
Top View  
(Magnetic Ballast)  
Vertical Adjustment:  
5/8" (16 mm) to  
2 7/8" (73 mm)  
20" (508 mm) to  
30" (762 mm)  
9-3/4"  
(248 mm)  
11" (280 mm)  
(100W)  
7-5/16" (187 mm) Dia.  
8-5/8" (200 mm) Dia.  
2" (50 mm) max.  
Ceiling Thickness  
Top View  
(Electronic Ballast)  
Ceiling Cutout: 8" (203mm) dia.  
Reflector Trim  
C7E17FLWHW  
Frame-In Kit  
Lamp (Coated, Ceramic MH)  
C770MHE1 Electronic, 120V  
C770MHE2 Electronic, 277V  
C710MHE1 Electronic, 120V  
C710MHE2 Electronic, 277V  
70W ED17,BD17 (Enclosed)  
70W ED17, BD17 (Enclosed)  
100W ED17, BD17 (Enclosed)  
100W ED17 BD17 (Enclosed)  
Fresnel Lens, White Step Baffle, White Flange  
Prismatic Lens, White Step Baffle, White Flange  
C7E17PLWHW  
C770MHU Magnetic, 120V/277V 70W ED17, BD1 (Enclosed)  
C710MHU Magnetic, 120V/277V 100W ED17, BD17 (Enclosed)  
Features  
Electrical  
1. Reflector: Semi-Specular anodized aluminum, 16 ga. Removable from inside  
fixture for access to splices and ballast.  
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high-power factor, T.H.D.  
<15%, thermally and transient protected, RMI / RFI complies with FCC Part 18  
non-consumer equipment, shut-down circuit at end of lamp life, sound rating  
"A", -5° F minimum starting temperature, Type 1 outdoor rating.  
2. Lens: Prismatic (C7E17PLWHW) or Fresnel (C7E17FLWHW) lens. Regressed  
1 3/4" from ceiling line.  
3. Die-Cast Baffle: Painted white, self flange, deep conical step baffle for  
low brightness, supports lens. Small Allen-head set screw provides secure  
attachment for use where vandal resistant luminaires are required.  
4. Torsiontite Springs: Permit removal of lens assembly without tools.  
5. Socket Cup: Galvanized steel, pre-wired with medium base pulse rated  
socket. Snaps onto upper reflector for secure attachment without tools;  
unitized construction assures proper lamp alignment to optics for consistent  
performance.  
Ballast  
70W MH M98/M143  
100W MH M90/M140  
Magnetic Ballast: 120V/277V dual voltage, 60 Hz., encased and potted,  
HX-HPF circuit type, high power factor, sound rating “B”, -20° F minimum  
starting temperature, Type 1 Outdoor rating.  
Ballast  
70W MH M98/M143  
100W MH M90/M140  
ANSI Code Voltage Max. Amps Input Watts  
120/277  
120/277  
0.67/0.28  
0.90/0.43  
78  
110  
ANSI Code Voltage Max. Amps Input Watts  
120/277  
120/277  
1.90/0.80  
2.40/1.10  
94  
125  
6. Mounting Frame: 0.048"(18-ga.) galvanized steel includes pre-installed  
mounting bars.  
Options and Accessories  
7. Mounting Ring: 0.048"(18-ga.) galvanized steel. Designed for vertical  
adjustment from above or below for ceilings from 0" to 2" thick. Center-line  
notches allow consistent alignment of multiple fixtures.  
8. Retaining Springs: Rust resistant simplify reflector housing removal for  
inspection and maintenance.  
9. Vertical Adjustment Mechanism: Accommodates mounting to virtually  
any ceiling system using mounting bars (provided, or 1/2" EMT tubing (by  
others). Single locking feature secures all adjustments. Alignment holes and  
markings allow fixture to be preset prior to installation.  
Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet “A/E”  
Emergency Lamp: Add suffix E to FIK and Reflector Trim. See Spec.Sheet “A/E”  
Slope Ceiling Adapters: See Specification Sheet SCA.  
Fuse (magnetic ballast): Add suffix F1 or F2 to FIK (F1=120V F2=277V)  
Chicago Plenum: Consult Factory.  
Labels  
UL (Suitable for Wet Locations), CSA, I.B.E.W.  
10. Mounting Bars: 0.048" (18-ga.) pre-installed, telescoping bars extend to 30"  
long and lock securely into position. Built-in locking tabs provide positive  
attachment to common T-bar systems. Self-centering feature simplifies instal-  
lation in 24" O.C. grid systems. Attaches to steel or wood joists without  
accessories.  
Job Information  
Type:  
Job Name:  
Cat. No.:  
11.Ballast: Electronic 120V or 277V or dual voltage (120V/277V) magnetic.  
Assembly is accessible from below without tools for inspection and  
replacement.  
12. Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,  
90°C through branch circuit conductors; allows inspection from below.  
13. Thermal Protector: (not shown) Meets NEC and UL requirements. Do not  
install insulation above nor within 3" (76mm) of any part of the luminaire.  
Lamp(s):  
Notes:  
Lightolier a Genlyte company  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
© 2005 Genlyte LLC • B0809  
 

Legacy Car Audio Car Amplifier LA 1099 User Manual
Lennox Hearth Intercom System 8662 User Manual
Lexicon Recording Equipment CP 3 User Manual
Lindy Network Card 70928 User Manual
Linksys Network Cables WPC54GR DE User Manual
Logic 3 CD Player INSTRUCTION MANUAL User Manual
Logitech Mouse MK320 User Manual
Magnavox Flat Panel Television 26MF321B User Manual
Maytag Clothes Dryer W10240579B User Manual
Maytag Oven WM277B User Manual