Lytecaster® Recessed Downlighting 1100IC
Page 1 of 1
6 3/4" Aperture Incandescent Insulated Ceiling Frame-In Kit
15 1/2"
1
7
3
7 5/16"
FRAME-IN KIT
2
4
9"
11 1/8"
5
6
REFLECTOR TRIM
Ceiling Opening
1100ICM
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit
Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Adjustable
Enclosed
Diffuser
Wall
Washer
Satin
Cone
Sloped
Ceiling
Basic
White
Cross
Blade
Recessed
Line Volt.
Recessed
Low Volt.
Reflector
Baffles
1143
1108†
1110†
1131
1105
1170M1
1171
1132
1129†
1155
1155WH
1158
1160
1161
1161WH
1163
1164
1121
1185
1100IC
1144
1131WH
1131GD
1131CL
1131BK
1133
1105WH
1175
1129CD†
1129WH
1129CL†
1129GD†
1129BK†
1124
1186
1144CD
1126
1186WH
1100ICM
3/8” Integral
Plaster Lip
1176
1128
1176WH
1179M1
1179WH
1134
1177SH
1178SH
1190
1133WH
1133GD
1133CL
1133BK
1154
Cone:
1112†
1113†
1113BK†
1113CD†
1113WH
Eyeball:
1122
1122WH
1123
1123WH
1182
Open Wet:
1184WH
1184CD
†Add NM to catalog number for Natural Metal flange finish.
Features
Options & Accessories
Mounting Bars:
Plaster Ceiling Ring:
1. Housing: 0.026" (#20 ga.) galvanized steel. U.L. listed for direct contact
with thermal insulation. Access door for inspection of junction box.
2. Mounting Frame: 0.036” (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1” thick. ICM version has 3/8” deep integral lip. Four slots
are positioned 90° apart to simplify alignment. Push-in/twist-out rotoclips
hold reflector flush to ceiling.
1976 - 13" set of (4)
1961 - 7/8" depth for wet plaster ceilings.
Not for use with ICM housing.
Extra-Thick Ceiling Mounting Ring: 1967A - up to 2" thick ceilings.
Labels
UL (Type I.C., Suitable for Damp Locations), I.B.E.W.
3. Junction Box: 2” x 4” x 4”, 0.063” (#14 ga.) galvanized steel. U.L. listed
for, maximum of 6 No. 12 ga., 90°C through branch circuit conductors.
Quick release “L” shaped cover for outside access to wiring. Access door
inside of housing allows easy inspection of wiring without removal of
housing. Integral cable clamps permit attachment of nonmetallic Romex®
or armored cable without the need for additional connectors.
4. Mounting Bars: 0.059” (#16 ga.) galvanized steel. 13” long bars extend to
27”, rotatable and lockable, with integral T-bar tabs. Attach to wood joist
or T-bar ceilings without need of accessories.
Romex® is a registered trademark of General Cable Industries Inc.
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
5. Socket Housing: Impact extruded aluminum or galvanized steel.
6. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
7. Thermal Protector: Meets NEC and U.L. requirements. Located inside
housing.
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
|