Features and Benefits
Rotary Tillers, Standard Tine Rotation
RTA25 & RTA35 Series
Features
Benefits
Working widths
(RTA25 = 62” & 70”) And (RTA35 = 76”) To meet specific customer needs
(RTA25 = 25 - 55 HP) And (RTA35 = 35 - 75 HP)
Tractor HP Range
Fits Land Pride
Quick-Hitch
Allows for quick and easy one person hook-up. Offset can not be used with Quick-Hitch.
Offset capability
Parking stand
Offset 5” by moving lower hitch points to cover right tire track.
Allows for easy hook-up and storage.
Stamped top hitch
Stamped plate adds additional strength to hitch.
Hitch bolted to
inside of support
Force is applied downward on top hitch, by bolting hitch to inside of support. Keeps hitch
from ‘spreading’ outward.
8” Digging depth
For extra deep soil penetration and cultivation.
Four or six tines per flange
Rotor swing diameter
Six tines go through the ground better than four.
(RTA25 = 17”) And (RTA35 = 19”) For deep tilling action and turning the soil over faster.
Double lip seal helps keep the dirt out and the grease in.
Double lip seal on rotor
bearings
#100 Drive chain
enclosed in oil bath
Heavy-duty drive chain reduces stretching, oil keeps constant lubrication and holds wear
to a minimum.
Stamped chain cover
Stamped forming adds additional strength.
Adjustable skid shoes
Wear shield or left skid shoe
Control depth with various settings.
Shield protects lower portion of chain cover from wearing due to dragging in the soil.
Cat. 3 driveline with
shear bolt or slip-clutch
Heavy driveline for rough conditions. Shear-bolt or slip-clutch protects other drive train
components. Slip-clutch saves having to replace shear bolts.
Rear gate down pressure
springs (optional)
Forces the rear gate down to level even better. Easy-to-adjust chain tightener Cast iron
chain tightener is a simple bolt adjustment to keep constant tension on the chain.
Formed rear deflector with
springs
Forming gives deflector additional strength. Springs allow deflector to '‘bounce'’ when
obstructions are hit.
Designs, specifications, features and information are subject to change without notice.
04/17/07
311-254F
70
311-254F
|