Post Hole Diggers
Specifications & Capacities
Post Hole Diggers
PD10 and PD15 Series
PD10
15 to 30 HP
120 lbs.
30"
PD15
20 to 40 HP
161 lbs.
48"
Tractor HP Range
Weight Without Auger
Auger Length
Auger Flight Thickness
Auger Pipe
1/4”
2 1/2" ID
Auger Teeth
Forged, Individually Replaceable
40 Degree angle installed on flat side
50 Degree angle installed on angled side
Number of Teeth
6" - 2 teeth
9" & 12" - 4 teeth
Pilot
Cast steel, 3 drill points
Cat. II Shearbolt
300 RPM
Driveline
Maximum Operating PTO Speed
Gearbox
540 RPM 3:1 Ratio
540 RPM 3.18:1 Ratio
Output Shaft
3-Point Hitch Cat.
Boom Tube
2" O.D. Round
Cat. I
2 7/8” O.D.
2 7/8” O.D.
Yoke Tube
Options and Accessories
Auger Sizes (Options)
6”, 9”, or 12”
6”, 9”, or 12”
Auger Extensions (Accessories)
Cat. III Torque Limiter Driveline
Hydraulic Down Pressure Kit
Storage Stand
7" & 14" Extensions Available
Not Available
Available
Not Available
Available
Available
Available
PD10 = 58 5/8"
PD15 = 77 5/8"
PD10 = 31 1/2"
PD15 = 32"
PD10 = 70"
PD15 = 89 1/2"
26776
Designs, specifications, features and information are subject to change without notice.
50
2/03/09
317-048S continued on next page
|