LA Audio Electronic Microphone MS424 User Manual

PRODUCT OVERVIEW  
The MS424 is a 4 channel 1 into 4 Unity Gain Active Microphone Splitter in a compact 1U self powered case.  
The MS424 is designed for applications where multiple feeds are required from one set of microphones without  
the signal degradation experienced with most passive splitting solutions. The Unity Gain design philosophy  
allows simple integration into existing systems without the need for lengthy recalibration.  
Each of the MS424 channels has an electronically balanced input, which may be transformer balanced as an  
option, and four independently transformer buffered floating outputs on XLR connectors. Output one of each  
channel may be linked directly to the input via a rear panel switch. The unit may also be configured, by way of  
internal links, to feed 8, 12 or 16 outputs from any one input, allowing the MS424 to be used for press box  
applications.  
The front panel of the MS424 gives access to outputs 3 and 4 as well as phantom power switching with  
phantom presence LED, and Pad switching for line level signals. The inputs and outputs 1&2 are grouped on  
the rear panel together with the output 1 Link switches.  
The MS424's internal power supply makes it ideally suited to smaller installations where it becomes highly cost  
effective when compared to externally powered alternatives.  
SPECIFICATIONS  
ELECTRICAL  
PHYSICAL  
Frequency response:  
Equivalent Input Noise: > -121dBu  
THD:  
Gain:  
20Hz to 20kHz (+0, -0.5dB)  
Input Connector:  
Output Connectors:  
Power Connection:  
XLR 3 Pin (Pin 2 hot)  
XLR 3 Pin (Pin 2 hot)  
Detachable lead.  
< 0.01 % (1kHz, 150R load)  
0dB (-20dB with Pad)  
2k  
IEC 3 pin socket  
Input Impedance:  
Maximum Input Level: 0dBu (+20dBu with Pad)  
Output Impedance:  
Load Impedance:  
Dimensions:  
483mm (19") W  
208mm (8.2") D  
44mm (1.75") H  
4.4kg  
< 50R  
>150R  
Weight:  
Shipping Weight:  
Temperature Range:  
5.4kg  
Operating: 0C to 50C  
Storage: -30C to 75C  
15VA, 115/230V, 50/60Hz  
Power Requirement:  
BLOCK DIAGRAM  
1
LINK  
switch  
Channel  
jumpers  
+48V Pad  
2
3
1
Mic  
Internal  
bus  
4
Input stage  
Output stage  
In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice.  
Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ.  
Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: [email protected]  
An SCV International Group Company  
British  
Originals  
 

Kyocera All in One Printer KM C3225E User Manual
Lincoln Electric Welding System IM703 A User Manual
Linksys Network Router WPG11 User Manual
Loewe Flat Panel Television Digital Recorder User Manual
Lyngdorf Audio Stereo Amplifier SDA 2175 User Manual
Magellan GPS Receiver NAV 5200DX User Manual
McIntosh Stereo Amplifier MA7000 User Manual
Melissa Electric Shaver 638 149 User Manual
Melissa Espresso Maker 245 017 User Manual
Melissa Popcorn Poppers 643 041 User Manual